| 1. |
- Chen, Fuqiang, et al.
(författare)
-
减压阀噪声研究进展
- 2019
-
Ingår i: Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering. - 1674-8530. ; 37:1, s. 49-57
-
Tidskriftsartikel (refereegranskat)abstract
- In order to comprehensively understand the specific noise generation process inside pressure reducing valves (PRV) and its existing research outcomes, the generation of noise in PRV with its research methods in China and abroad was summarized. Then, the current research status of noise reduction technologies was reviewed from two aspects: source and propagation. Based on analysis and summarization, the major existing problems in current noise reduction technologies were discussed, including complex flow situation in PRV, ambiguity of vortex location and uncertain of interaction between high-velocity jet flows and so on. In the future investigation of noise reduction in PRV, it is advised that the position of noise source in valve should be determined firstly through combination of theoretical analysis, experiment and numerical analysis. Then, the directivity of noise in the valve can be clarified. Thereby, a further study of noise reduction mechanism and technology can be launched. Finally, noise in PRV can be reduced to the utmost extent. In the future, control of noise inside PRV should start with flow mechanism and structural innovation, and then a universal valve design theory with low noise will be put forward. Investigation into noise characteristics in pressure reducing valve can provide a reliable basis for reducing noise effectively.
|
|
| 2. |
- Li, Kai, et al.
(författare)
-
Metal thermopile infrared detector with vertical graphene
- 2023
-
Ingår i: Wuli Xuebao/Acta Physica Sinica. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 72:3
-
Tidskriftsartikel (refereegranskat)abstract
- Thermopile infrared detector is a kind of detector device mainly composed of thermocouple as the basic unit. Because of its simple principle, no need of cooling equipment, and other advantages, it has been widely used in various fields of production and life. However, the absorption rates of the materials in conventional thermopile devices are poor, and the majority of them are incompatible with microfabrication methods. In this work, a metal thermopile infrared detector with vertical graphene (VG) is designed and fabricated. The VG is grown via plasma enhanced chemical vapor deposition, and retained at the device’s thermal ends to provide the thermopile IR detector’s wideband and high response characteristics. The detector achieves a room temperature responsivity reaching a value as high as 1.53 V/W at 792 nm, which can increase the response results about 28 times and reduce the response time to 0.8 ms compared with the thermopile detector without VG. After systematically measuring the response results, it is finally found that there are three main mechanisms responsible for the response on the composite device. The first one is the response generated by the metal thermopile itself alone. The second one is the response increased eventually by the contribution of VG covered at the metal thermal junction that expands the temperature difference. The last one is the response generated by the temperature gradient existing inside the VG on the surface of the device after the absorption of heat. The portion of each partial response mechanism in the total response is also analyzed, providing a new reference direction for analyzing the response generation mechanism of thermopile detectors with other absorbing materials. The process is compatible with the microfabrication, while the device performance is enhanced and suitable for mass production. Furthermore, by utilizing the surface plasmon resonance to combine VG with metal nanoparticles, the material’ s light absorption is found to be enhanced significantly under the same conditions, and the resulting thermal voltage can be increased to 6 times. The results indicate that VG promises to possess practical applications, in many fields such as photoelectric sensing and power production devices. This technology provides a new method to manufacture high-performance thermopile infrared detectors and other sensor devices.
|
|
| 3. |
- Qian, Li-Bing, et al.
(författare)
-
Transmission of electrons through the conical glass capillary with the grounded conducting outer surface
- 2017
-
Ingår i: Wuli xuebao. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 66:12
-
Tidskriftsartikel (refereegranskat)abstract
- The transmission of 1.5 keV-electrons through a conical glass capillary is reported. This study aims to understand the so-called guiding effect for the negatively charged particles (e.g. electrons). The guiding mechanism is understood quite well with positively charged particles in particular highly charged ions, but not clear with electrons, i. e., even the basic scheme mediated by the existence of negative charge patches to guide the electrons is still somewhat controversial.. The study of the charging-up dynamics causing the electrons transport inside the capillary will shed light on this issue. In order to perform this, a data acquisition system has been setup to follow the time evolution of the two-dimensional angular distribution of the transmitted electrons. The electrons are detected by the multi-channel plate (MCP) detector with a phosphor screen. The image from the phosphor screen is recorded by a charge-coupled device camera. The timing signals for the detected events are extracted from the back stack of the MCP detector and recorded by the data acquisition system, synchronized with the acquired images. The electron beam has a size of 0.5 mm x 0.5 mm and a divergence of less than 0.35.. The inner diameter of the straight part of the capillary is 1.2 mm and the exit diameter is 225 mu m. A small conducting aperture of 0.3 mm in diameter is placed at the entrance of the capillary. Two-dimensional angular distribution of the transmitted electrons through conical glass capillary and its time evolution are measured. The results show that the transmission rate decreases and reaches to a constant value for the completely discharged glass capillary with time going by. The centroid of the angular distribution moves to an asymptotic value while the width remains unchanged. These transmission characteristics are different from those indicated in our previous work (2016 Acta Phys: Si n: 65 204103). The difference originates from the different manipulations of the capillary outer surface. A conducting layer is coated on the outer surface of the capillary and grounded in this work. This isolates various discharge/charge channels and forms a new stable discharge channel. The transmission rate as a function of the tilt angle shows that the allowed transmission occurs at the tilt angle limited by the geometrical factors, i. e., the geometrical opening angle given by the aspect ratio as well as the beam divergence. The transmission characteristics suggest that most likely there are formed no negative patches to facilitate the electron transmission through the glass capillary at this selected beam energy. It is different from that of highly charged ions, where the formation of the charge patches prohibits the close collisions between the following ions and guides them out of the capillary.
|
|
| 4. |
- Yu, Jun-Chao, et al.
(författare)
-
Levels and distribution of short chain chlorinated paraffins in seafood from Dalian, China
- 2014
-
Ingår i: Huan jing ke xue= Huanjing kexue / [bian ji, Zhongguo ke xue yuan huan jing ke xue wei yuan hui "Huan jing ke xue" bian ji wei yuan hui.]. - Beijing : Ke xue zhu ban she. - 0250-3301. ; 35:5, s. 1955-1961
-
Tidskriftsartikel (refereegranskat)abstract
- Seafood samples were collected from Dalian, China to study the accumulation and distribution characteristics of short chain chlorinated paraffins (SCCPs) by GC/ECNI-LRMS. Sum of SCCPs (dry weight) were in the range of 77-8 250 ng.g-1, with the lowest value in Scapharca subcrenata and highest concentration in Neptunea cumingi. The concentrations of sum of SCCPs (dry weight) in fish, shrimp/crab and shellfish were in the ranges of 100-3 510, 394-5 440, and 77-8 250 ng.g-1 , respectively. Overall, the C10 and C11 homologues were the most predominant carbon groups of SCCPs in seafood from this area,and a relatively higher proportion of C12-13 was observed in seafood with higher concentrations of sum of SCCPs . With regard to chlorine content, Cl1,, CI8 and CI6 were the major groups. Significant correlations were found among concentrations of different SCCP homologues (except C1, vs. Cl10 ) , which indicated that they might share the same sources and/or have similar accumulation, migration and transformation processes.
|
|
