| 1. |
- Abgrall, N., et al.
(författare)
-
The large enriched germanium experiment for neutrinoless double beta decay (LEGEND)
- 2017
-
Ingår i: AIP Conference Proceedings. - : Author(s). - 1551-7616 .- 0094-243X. ; 1894
-
Konferensbidrag (refereegranskat)abstract
- The observation of neutrinoless double-beta decay (0νββ) would show that lepton number is violated, reveal that neu-trinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely low backgrounds, at the level of ∼0.1 count /(FWHM·t·yr) in the region of the signal. The current generation 76Ge experiments GERDA and the Majorana Demonstrator, utilizing high purity Germanium detectors with an intrinsic energy resolution of 0.12%, have achieved the lowest backgrounds by over an order of magnitude in the 0νββ signal region of all 0νββ experiments. Building on this success, the LEGEND collaboration has been formed to pursue a tonne-scale 76Ge experiment. The collaboration aims to develop a phased 0νββ experimental program with discovery potential at a half-life approaching or at 1028 years, using existing resources as appropriate to expedite physics results.
|
|
| 2. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 3. |
- Bamiedakis, N., et al.
(författare)
-
56 Gb/s PAM-4 data transmission over a 1 m long multimode polymer interconnect
- 2015
-
Ingår i: CLEO: Science and Innovations, CLEO-SI 2015, San Jose; United States; 10-15 May 2015. - 9781557529688 ; , s. 2267-
-
Konferensbidrag (refereegranskat)abstract
- Advanced modulation formats can enable >40 Gb/s data rates in waveguide-based optical interconnects without the need for high-specification optoelectronic components. Record 56Gb/s PAM-4 data transmission is demonstrated over a 1 m-long multimode polymer waveguide.
|
|
| 4. |
- Edoff, Marika, 1965-, et al.
(författare)
-
Ultrathin CIGS Solar Cells with Passivated and Highly Reflective Back Contacts – : Results from the ARCIGS-M Consortium
- 2019
-
Ingår i: Proceedings of 36th European Photovoltaic Solar Energy Conference and Exhibition. ; , s. 597-600
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this work, we report results from the EU-funded project ARCIGS-M. The project started in 2016 and aims to reduce the use of indium and gallium by enabling the use of very thin Cu(In,Ga)Se2 (CIGS) layers while retaining high efficiency and developing innovative low-cost steel substrates as alternatives to glass. In the project, reflective layers containing TCO´s and silver have successfully been used to enhance the reflective properties of the rear contact. In addition, passivation layers based on alumina (Al2O3) deposited by atomic layer deposition (ALD) have been found to yield good passivation of the rear contact. Since the alumina layers are dielectric, perforation of these layers is necessary to provide adequate contacting. The design of the perforation patterns has been investigated by a combination of modeling and experimental verification by electron beam lithography. In parallel a nano-imprint lithography (NIL) process is further developed for scale-up and application in prototype modules. Advanced optoelectrical characterization supported by modeling is used to fill in the missing gaps in optical and electrical properties, regarding CIGS, interfaces and back contact materials.
|
|
