| 1. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 2. |
- Desjardins, Kewin, et al.
(författare)
-
Characterization of a back-illuminated CMOS camera for soft x-ray coherent scattering
- 2019
-
Ingår i: Proceedings of the 13th International Conference on Synchrotron Radiation Instrumentation, SRI 2018. - : Author(s). - 9780735417823 ; 2054
-
Konferensbidrag (refereegranskat)abstract
- A commercial scientific camera has been adapted and characterized at the SOLEIL Synchrotron with the aim to improve the acquisition capabilities on the soft X-ray coherent scattering experimental station at SEXTANTS beamline. This device is equipped by the last generation of back side illuminated scientific CMOS (BSI-sCMOS) of 2048 by 2048 pixels of 11 μm2 able to acquire low noise images with a frame rate up to 48 Hz. The camera's performance measurements have been done and shows a good level of readout noise, a large full-well capacity, a medium dark current and a good homogeneity, respectively, 1.6 e- rms (in High Gain mode), 80 000 e- (in Low Gain mode),<5 e-/pixel/s and ∼ 1%. The quantum efficiency (QE) measurement has been performed at the soft x-ray branch of the METROLOGIE beamline and gives a relatively good agreement with the expected theoretical values. Finally, the demonstration of the camera's efficiency and of the gain in useful time measurement related to the high frame rate have been performed with a series of Airy patterns images compared with an image recorded using the standard BSI-CDD already in operation at the SEXTANTS beamline.
|
|
| 3. |
- Griesmayer, E., et al.
(författare)
-
Applications of single-crystal CVD diamond XBPM detectors with nanometre x-ray beams
- 2019
-
Ingår i: Proceedings of the 13th International Conference on Synchrotron Radiation Instrumentation, SRI 2018. - : Author(s). - 9780735417823 ; 2054
-
Konferensbidrag (refereegranskat)abstract
- Measurements with a Diamond XBPM were carried out at the MAX IV Laboratory, Lund, Sweden, at the NanoMAX beam line. This was the first investigation of a Diamond XBPM detector with nanometre beams. The effect of diffusion, as well as the position resolution at the smallest available beam sizes were studied.
|
|
| 4. |
- Marcouille, O., et al.
(författare)
-
Production of high energy photons with in vacuum wigglers : From SOLEIL wiggler to MAXIV wiggler
- 2019
-
Ingår i: Proceedings of the 13th International Conference on Synchrotron Radiation Instrumentation, SRI 2018. - : Author(s). - 9780735417823 ; 2054
-
Konferensbidrag (refereegranskat)abstract
- Small gap wigglers become more and more attractive to produce high photon fluxes in the hard X-ray photon range. They use magnet blocks of high magnetization which resists much better to heating (baking, synchrotron radiation) than in the past, produce high magnetic field with numerous periods and are very compact. They also are a very good alternative to superconducting technology which requires special infrastructure, heavy maintenance and is not running cost free. SOLEIL, operating presently at 2.75 GeV has designed and built an in-vacuum wiggler of 38 periods of 50 mm producing 2.1 T at a minimum gap of 5.5 mm to delivered photon beam between 20 keV and 50 keV. Already in operation, further improvements are presently in progress to push photons towards higher energy, in particular thanks to the operation at lower gap (4.5 mm). MAX IV and SOLEIL, in the frame of collaboration, ave built an upgraded version of the existing SOLEIL wiggler with the target to extend the spectral range at high energy (above 50 keV) but also at low energy (4 keV) with the same insertion device. The design of the existing magnetic system has been modified to reach 2.4 T at a minimum gap of 4.2 mm and includes taper operation to avoid undulator structure in the radiated spectrum at low energy.
|
|
| 5. |
- Plivelic, Tomás S., et al.
(författare)
-
X-ray tracing, design and construction of an optimized optics scheme for CoSAXS, the small angle x-ray scattering beamline at MAX IV laboratory
- 2019
-
Ingår i: Proceedings of the 13th International Conference on Synchrotron Radiation Instrumentation, SRI 2018. - : Author(s). - 9780735417823 ; 2054
-
Konferensbidrag (refereegranskat)abstract
- A novel optical design for a flexible SAXS beamline at a modern synchrotron has been implemented for the CoSAXS beamline at the 3GeV ring at the MAX TV Laboratory. The performance of the beamline has been simulated through combined ray tracing and wave propagation with the code xrt taking into account the low emittance and highly coherent beam of MAX TV and the short inter-optics distances of the beamline. The total photon flux is estimated to be 1012-1013 ph/s with the coherent flux portion up to 10 % at 7.1 keV. The inhomogeneities in the X-ray beam arising from use of real (non-idealised) mirror surfaces are also modelled using the measured slope profiles of the mirrors. Strategies to mitigate these inhomogeneities are discussed. The optical components for CoSAXS have been constructed and beamline commissioning will start in 2019.
|
|
| 6. |
- Tu, Chien Ming, et al.
(författare)
-
Helicity-dependent terahertz radiation from topological insulator Sb2Te3 thin film by femtosecond optical excitation
- 2016
-
Ingår i: 41st International Conference on Infrared, Millimeter and Terahertz Waves, IRMMW-THz 2016. - 9781467384858
-
Konferensbidrag (refereegranskat)abstract
- We report on terahertz radiation from topological insulator (TI) Sb2Te3 thin film under ultrafast optical excitation with different helicity. Polarity-reversals of the emitted THz radiation were observed as the helicity of optical pulses reversed. The observed phenomena are coincident with the characteristics of the helicity-dependent photocurrent on TIs. Our work demonstrates the potential applications of surface photocurrents on TIs for opto-spintronics devices.
|
|
| 7. |
- Sun, Bin, et al.
(författare)
-
An Improved k-Nearest Neighbours Method for Traffic Time Series Imputation
- 2017
-
Konferensbidrag (refereegranskat)abstract
- Intelligent transportation systems (ITS) are becoming more and more effective, benefiting from big data. Despite this, missing data is a problem that prevents many prediction algorithms in ITS from working effectively. Much work has been done to impute those missing data. Among different imputation methods, k-nearest neighbours (kNN) has shown excellent accuracy and efficiency. However, the general kNN is designed for matrix instead of time series so it lacks the usage of time series characteristics such as windows and weights that are gap-sensitive. This work introduces gap-sensitive windowed kNN (GSW-kNN) imputation for time series. The results show that GSW-kNN is 34% more accurate than benchmarking methods, and it is still robust even if the missing ratio increases to 90%.
|
|
| 8. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 9. |
- Lu, Xiuzhen, et al.
(författare)
-
The influence of sintering process on thermal properties of nano-silver paste
- 2018
-
Ingår i: 2018 19TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT). - 9781538663868 - 9781538663868 ; , s. 1157-1160
-
Konferensbidrag (refereegranskat)abstract
- Nano-silver paste with low sintering temperature and high operation temperature was introduced to the application of bonding materials for GaN and SiC devices. Thermal properties are critical issues for die attach materials due to the heat dissipation requirements of high power devices. The influence of sintering process parameters for nano-silver paste on the thermal properties was investigated. The thermal conductivity of sintered nano-silver paste increased with the increase of sintering temperature and sintering time because of the dense structure due to high temperature and long sintering time. To improve the thermal property, Ag coated micro-SiC particles were used as an alternative to partly replace pure nano-Ag particles. The results demonstrate that the SiC particles can reduce the voids and improve the density of the sintered silver structure. Moreover, the addition of SiC particles can also contribute to the increase of thermal diffusivity. As a result, the thermal conductivity of sintered silver paste with 1.5 wt.% Ag coated SiC particles was two times as compared to that without SiC particles with the same Ag concentration.
|
|
| 10. |
- Sun, Bin, et al.
(författare)
-
An Overview of Parameter and Data Strategies for K-Nearest Neighbours Based Short-Term Traffic Prediction
- 2017
-
Ingår i: ACM International Conference Proceeding Series Volume Part F133326. - New York, NY, USA : Association for Computing Machinery (ACM). - 9781450353762 ; , s. 68-74
-
Konferensbidrag (refereegranskat)abstract
- Modern intelligent transportation systems (ITS) requires reliable and accurate short-term traffic prediction. One widely used method to predict traffic is k-nearest neighbours (kNN). Though many studies have tried to improve kNN with parameter strategies and data strategies, there is no comprehensive analysis of those strategies. This paper aims to analyse kNN strategies and guide future work to select the right strategy to improve prediction accuracy. Firstly, we examine the relations among three kNN parameters, which are: number of nearest neighbours (k), search step length (d) and window size (v). We also analysed predict step ahead (m) which is not a parameter but a user requirement and configuration. The analyses indicate that the relations among parameters are compound especially when traffic flow states are considered. The results show that strategy of using v leads to outstanding accuracy improvement. Later, we compare different data strategies such as flow-aware and time-aware ones together with ensemble strategies. The experiments show that the flowaware strategy performs better than the time-aware one. Thus, we suggest considering all parameter strategies simultaneously as ensemble strategies especially by including v in flow-aware strategies.
|
|
