| 1. |
- Jonauskaite, Domicele, et al.
(författare)
-
A comparative analysis of colour–emotion associations in 16–88-year-old adults from 31 countries
- 2024
-
Ingår i: British Journal of Psychology. - : John Wiley and Sons Ltd. - 0007-1269 .- 2044-8295. ; 115:2, s. 275-
-
Tidskriftsartikel (refereegranskat)abstract
- As people age, they tend to spend more time indoors, and the colours in their surroundings may significantly impact their mood and overall well-being. However, there is a lack of empirical evidence to provide informed guidance on colour choices, irrespective of age group. To work towards informed choices, we investigated whether the associations between colours and emotions observed in younger individuals also apply to older adults. We recruited 7393 participants, aged between 16 and 88 years and coming from 31 countries. Each participant associated 12 colour terms with 20 emotion concepts and rated the intensity of each associated emotion. Different age groups exhibited highly similar patterns of colour–emotion associations (average similarity coefficient of.97), with subtle yet meaningful age-related differences. Adolescents associated the greatest number but the least positively biased emotions with colours. Older participants associated a smaller number but more intense and more positive emotions with all colour terms, displaying a positivity effect. Age also predicted arousal and power biases, varying by colour. Findings suggest parallels in colour–emotion associations between younger and older adults, with subtle but significant age-related variations. Future studies should next assess whether colour–emotion associations reflect what people actually feel when exposed to colour.
|
|
| 2. |
- Pilthammar, Jan, et al.
(författare)
-
New press deflection measuring methods for the creation of substitutive models for efficient die cambering
- 2021
-
Ingår i: IOP Conference Series. - : IOP Publishing. - 1757-8981 .- 1757-899X. ; 1157
-
Tidskriftsartikel (refereegranskat)abstract
- Cost and time for die tryout are significant within the car industry, and elastic deflections of dies and presses are most commonly not considered during the virtual die design and forming simulation phase. Because of this, active surfaces of stamping dies are only cambered based on previous experiences of tool types and presses. However, almost all stamping dies and presses are unique, and available experiences are not valid for new materials. Partners within the Eureka SMART Advanced Manufacturing research project CAMBER have developed advanced deflection measuring devices to quantify the elastic deformations of presses. Using these measurements, cambering methodologies can be utilized in sheet metal forming simulations. Important breakthroughs in recent years enabling the cambering methodology consists of efficient simulation strategies for full scale simulations with elastic dies and optimization techniques for creating substitutive press structures based on measurements. Furthermore, modern press deflection measurement methods are beneficial in applications such as Industry 4.0, predictive maintenance, product quality control, etc. through a more advanced understanding and live monitoring of the press system.
|
|
| 3. |
- Ribadeneyra, Maria, et al.
(författare)
-
Lignin-derived electrospun freestanding carbons as alternative electrodes for redox flow batteries
- 2020
-
Ingår i: Carbon. - : Elsevier Ltd. - 0008-6223 .- 1873-3891. ; 157, s. 847-856
-
Tidskriftsartikel (refereegranskat)abstract
- Redox flow batteries represent a remarkable alternative for grid-scale energy storage. They commonly employ carbon felts or carbon papers, which suffer from low activity towards the redox reactions involved, leading to poor performance. Here we propose the use of electrospun freestanding carbon materials derived from lignin as alternative sustainable electrodes for all-vanadium flow batteries. The lignin-derived carbon electrospun mats exhibited a higher activity towards the VO2 +/VO2+ reaction than commercial carbon papers when tested in a three-electrode electrochemical cell (or half-cell), which we attribute to the higher surface area and higher amount of oxygen functional groups at the surface. The electrospun carbon electrodes also showed performance comparable to commercial carbon papers, when tested in a full cell configuration. The modification of the surface chemistry with the addition of phosphorous produced different effect in both samples, which needs further investigation. This work demonstrates for the first time the application of sustainably produced electrospun lignin-derived carbon electrodes in a redox flow cell, with comparable performance to commercial materials and establishes the great potential of biomass-derived carbons in energy devices.
|
|
| 4. |
- Silva, R., et al.
(författare)
-
Validating dilute settling suspensions numerical data through MRI, UVP and EIT measurements
- 2016
-
Ingår i: Flow Measurement and Instrumentation. - : Elsevier. - 0955-5986 .- 1873-6998. ; 50, s. 35-48
-
Tidskriftsartikel (refereegranskat)abstract
- The measurement of fluid dynamic quantities are of great interest both for extending the range of validity of current correlations to be used in equipment design and for verification of fundamental hydrodynamic models. Studies where comparisons are made between imaging techniques serve to provide confidence on the validity of each technique for the study of multiphase flow systems. The advantage of cross-validation is that it can help establish the limitations of each technique and the necessary steps towards improvement. A small amount of comparative studies are found in the literature and none of them reports the study of settling particles suspension flow using simultaneously Ultrasonic Velocity Profiling (UVP), Magnetic Resonance Imaging (MRI) and Electrical Impedance Tomography (EIT), at least not to the best of the authors knowledge. In the present paper the authors report efforts made on the characterization of dilute suspensions of glass particles in turbulent flow, with increasing flow velocities and particles concentrations, in a pilot rig at a laboratorial scale, using both MRI, EIT and UVP: direct comparisons of EIT, MRI and UVP measurements acquired and mixture model numerical simulations are presented and the level of agreement explored.
|
|
| 5. |
- Andersson, Oscar, et al.
(författare)
-
Digitalization of Process Planning of Spot Welding in Body-in-white
- 2016
-
Ingår i: Procedia CIRP. - : Elsevier B.V.. - 2212-8271. ; , s. 618-623
-
Konferensbidrag (refereegranskat)abstract
- Process planning of spot welding for body-in-white automobile structures involves several experimental (physical) welding trials to set the process parameters. These experimental trials are crucial in ensuring the quality and efficiency of the process. However, due to the iterative nature of the work, running several experiments is costly and time consuming prolonging the overall development cost and time significantly. To minimize the cost and time, replacing the physical tests by digital (virtual) tests is an established approach although not often applied for spot welding. However, for a long chain of development process with several iterative loops, this is not a trivial task considering the availability of information and continuity of the work flow. This paper reports the work and results of an industrial case study conducted on spot welding of a body-in-white car pillar in a Swedish auto manufacturer. The aim of the study is to investigate and propose the necessary conditions required to replace a physical test by virtual tests in terms of validity and expedited execution of the process. Information sharing, knowledge reuse and streamlining the work flow have found to be critical condition for valid and rapid virtual tests. © 2016 The Authors.
|
|
| 6. |
- Ankerfors, M., et al.
(författare)
-
The use of microfibrillated cellulose in high filler fine papers
- 2013
-
Ingår i: Pap. Conf. Trade Show, PaperCon. - 9781627489669 ; , s. 1129-1132
-
Konferensbidrag (refereegranskat)abstract
- The field of communication, printing and writing papers has become an increasingly competitive field during the latest years as the market demand of printing and writing papers and newsprint has finally started to decline in the developed economies. One obvious approach to stay competitive is to increase the filler content of such papers. High filler paper is not a new idea and numerous approaches have been tested over the years to produce such papers. In order to reach industrial implementation, pilot-scale research and development under industrial conditions is necessary as a step after laboratory studies. Therefore an environment has been developed in order to perform projects targeting existing technologies for high filler applications as well as the new possibilities incurred by e.g. microfibrillated cellulose.
|
|
| 7. |
- Arrhenius, Karine, et al.
(författare)
-
Traceable reference gas mixtures for sulfur-free natural gas odorants
- 2014
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 13:1, s. 6695-6702
-
Tidskriftsartikel (refereegranskat)abstract
- The first reference gas mixtures of sulfur-free natural gas odorants that are traceable to the International System of Units (SI) have been produced and their compositions validated. These mixtures, which contain methyl acrylate and ethyl acrylate at amount fractions between 1.1 and 2.1 μmol mol-1, can be used to underpin measurements of sulfur-free odorants, which are increasingly being used to odorize natural gas in transmission networks as they have less harmful properties than traditional sulfur-containing odorants. The reference gas mixtures produced have been shown to be stable in passivated aluminum cylinders for at least 8 months and have been validated (to within 6% or less) by interlaboratory measurements at three National Measurement Institutes. The stability of methyl acrylate and ethyl acrylate in gas sampling bags has been investigated, and the challenges of analyzing 2-ethyl-3- methylpyrazine, which is used as a stabilizer in sulfur-free odorants, are also briefly discussed.
|
|
| 8. |
- Björnsson, Ivar, et al.
(författare)
-
Suitable degree of crudeness in engineering practice
- 2019
-
Ingår i: IABSE Symposium, Guimaraes 2019. - : International Association for Bridge and Structural Engineering (IABSE). - 9783857481635 ; , s. 1592-1599
-
Konferensbidrag (refereegranskat)abstract
- Practicing structural engineers may be familiar with the main principles of structural reliability but may not necessarily be experts in using such methods. This may lead to a lack in understanding the effect of uncertainties on the ensuing structural safety and to sub-optimization of more traditional structural engineering aspects. The aim of the current paper is to highlight the importance of considering risks and uncertainties in design and to improve the awareness of practicing engineers to such considerations. The importance of a consistent treatment of uncertainties in structural engineering is brought to attention with focus on the modelling approaches which often underlie decisions. Different aspects discussed are: decision making in light of uncertainty, principles of consistent crudeness and the influence of engineering performance in practice on the safety of structures. A simplified model, considering strategies for improving engineering models, is considered and examples, based on simplified decision models, are also provided.
|
|
| 9. |
- Brandon, Daniel, et al.
(författare)
-
Parametric fire design – zero-strengthlayers and charring rates
- 2017
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In the field of fire safety engineering performance based design methods are increasingly used to demonstrate that building designs are safe. However, performance based design is not commonly used for the design of timber structures, as there are not many relevant assessment methods available (Östman et al. 2010). For assessment whether the design of a building meets certain criteria, a design fire scenario is needed. Design fires often describe the temperature throughout a fire and are often based on dimensions, ventilation conditions and the fuel load of the compartment. Parametric fires are such design fires, used for structural calculations corresponding to post-flashover fires in compartments, based on the compartment’s dimensions, ventilation openings, lining materials, and the fuel load. Eurocode 1 (EN1991-1- 2:2004) includes parametric fires. Annex A of Eurocode 5 (EN1995-1-2:2004) offers calculation methods to determine charring rates of timber under parametric fire exposure, which depend mostly on the compartment’s ventilation opening sizes. However, Annex A is not accepted for use in all European countries, as the provided charring rates are questioned. Additionally, there are some parameters missing for calculations of structures exposed to parametric fires, namely: (1) notional charring rates, which take into account an increased char depth at the corners of small crosssections and (2) zero-strength-layers, which take into account a strength reduction of uncharred but damaged wood in the structural member. This paper presents an experimental study performed to determine one-dimensional, notional charring rates and zero-strength-layers corresponding to a range of parametric fire curves.
|
|
| 10. |
- Cea, B., et al.
(författare)
-
Development and Evaluation of an Innovative Method Based on Dilution to Sample Solid and Condensable Fractions of Particles Emitted by Residential Wood Combustion
- 2021
-
Ingår i: Energy & Fuels. - : American Chemical Society. - 0887-0624 .- 1520-5029. ; 35:23, s. 19705-
-
Tidskriftsartikel (refereegranskat)abstract
- An innovative and simple method based on dilution, named as the dilution chamber (DC), allowing the measurement of solid and condensable fractions of particulate matter emitted by residential wood combustion appliances has been developed, and its performances have been evaluated. The DC method was then tested by five European institutes (Ineris, ISSI/ENEA, DTI, and RISE) on advanced residential wood log/pellet stoves, under nominal output and low output combustion conditions and using different fuel types. The aim of the study was to evaluate the capability of the DC method to collect the condensable fraction. The DC method was compared with another manual method used to collect the solid and condensable fractions at the same time, the dilution tunnel (DT), on four sampling platforms. A third method, a combining heated filter and impinger filled in with isopropanol collection (SPC-IPA), was also used by Ineris only for comparison with the DC method. PM measurements based on the DC method globally showed a linear correlation with PM measurements based on DT (R2 ranged between 0.81 and 0.99, p < 0.05) specifically for the residential wood stoves under low output conditions when the condensable fraction contributes the most. An analysis and quantification of PAHs related to the total mass of PM of samples taken by the DC method and performed by ENEA/ISSI showed that it produces a condensation effect of semivolatile species comparable or even greater than the DT method. PM emission factors calculated from PM measurements based on the DC method were (i) about 2- to 20-fold higher for the residential wood stoves (EF ranged between 201 to 2420 g GJ-1) compared to those obtained for the residential pellet stoves (EF ranged between 108 to 556 g GJ-1) and (ii) of the same magnitude of PM emission factors from the literature or the EMEP/EEA air pollutant emission inventory guidebook.
|
|
