| 1. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 2. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
- Allen, S. L., et al.
(författare)
-
C-13 transport studies in L-mode divertor plasmas on DIII-D
- 2005
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337-39:03-jan, s. 30-34
-
Tidskriftsartikel (refereegranskat)abstract
- (CH4)-C-13 was injected with a toroidally-symmetric gas system into 22 identical lower-single-null L-mode discharges on DIII-D. The injection level was adjusted so that it did not significantly perturb the core or divertor plasmas, with a duration of similar to 3 s on each shot, for a total of similar to 300 T L of injected particles. The plasma shape remained very constant; the divertor strike points were controlled to similar to 1 cm at the divertor plate. At the beginning of the subsequent machine vent, 29 carbon tiles were removed for nuclear reaction analysis of C-13 content to determine regions of carbon deposition. It was found that only the tiles inboard of the inner strike point had appreciable 1 3 C above background. Visible spectroscopy measurements of the carbon injection and comparisons with modeling are consistent with carbon transport by means of scrape-off layer flow.
|
|
| 4. |
- Sygletos, S., et al.
(författare)
-
Phase locking and carrier extraction schemes for phase sensitive amplification
- 2010
-
Ingår i: 2010 12th International Conference on Transparent Optical Networks, ICTON 2010. - 9781424477975
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- We demonstrate two schemes which enable simultaneous phase locking, carrier extraction and frequency shifting for use in stand-alone phase sensitive amplifiers. The schemes provide phase locked pumps at appropriate frequency spacing for a number of non-degenerate PSA configurations. © 2010 IEEE.
|
|
| 5. |
|
|
| 6. |
- Parmigiani, Francesca, et al.
(författare)
-
All-Optical Phase Regeneration of 40Gbit/s DPSK Signals in a Black‐Box Phase Sensitive Amplifier
- 2010
-
Ingår i: 2010 Conference on Optical Fiber Communication, Collocated National Fiber Optic Engineers Conference, OFC/NFOEC 2010; San Diego, CA; United States; 21 March 2010 through 25 March 2010. - 9781557528841 ; , s. PDPC3-
-
Konferensbidrag (refereegranskat)abstract
- We present a black‐box four wave mixingbased bit‐rate‐flexible phase sensitive amplifier and use it in the first demonstration of 40 Gbit/s DPSK phaseregeneration.
|
|
| 7. |
- Beck, R., et al.
(författare)
-
GPSDTN : Predictive velocity-enabled delay-tolerant networks for arctic research and sustainability
- 2007
-
Ingår i: Second International Conference on Internet Monitoring and Protection (ICIMP 2007). - Los Alamitos, Calif : IEEE Computer Society Press. - 9780769529110
-
Konferensbidrag (refereegranskat)abstract
- A Delay-Tolerant Network (DTN) is a necessity for communication nodes that may need to wait for long periods to form networks. The IETF Delay Tolerant Network Research Group is developing protocols to enable such networks for a broad variety of Earth and interplanetary applications. The Arctic would benefit from a predictive velocity-enabled version of DTN that would facilitate communications between sparse, ephemeral, often mobile and extremely power-limited nodes. We propose to augment DTN with power-aware, buffer-aware location- and time-based predictive routing for ad-hoc meshes to create networks that are inherently location and time (velocity) aware at the network level to support climate research, emergency services and rural education in the Arctic. On Earth, the primary source of location and universal time information for networks is the Global Positioning System (GPS). We refer to this Arctic velocity-enabled Delay-Tolerant Network protocol as "GPSDTN" accordingly. This paper describes our requirements analysis and general implementation strategy for GPSDTN to support Arctic research and sustainability efforts
|
|
| 8. |
- Duncanson, Laura, et al.
(författare)
-
Aboveground biomass density models for NASA's Global Ecosystem Dynamics Investigation (GEDI) lidar mission
- 2022
-
Ingår i: Remote Sensing of Environment. - : Elsevier BV. - 0034-4257 .- 1879-0704. ; 270
-
Tidskriftsartikel (refereegranskat)abstract
- NASA's Global Ecosystem Dynamics Investigation (GEDI) is collecting spaceborne full waveform lidar data with a primary science goal of producing accurate estimates of forest aboveground biomass density (AGBD). This paper presents the development of the models used to create GEDI's footprint-level (~25 m) AGBD (GEDI04_A) product, including a description of the datasets used and the procedure for final model selection. The data used to fit our models are from a compilation of globally distributed spatially and temporally coincident field and airborne lidar datasets, whereby we simulated GEDI-like waveforms from airborne lidar to build a calibration database. We used this database to expand the geographic extent of past waveform lidar studies, and divided the globe into four broad strata by Plant Functional Type (PFT) and six geographic regions. GEDI's waveform-to-biomass models take the form of parametric Ordinary Least Squares (OLS) models with simulated Relative Height (RH) metrics as predictor variables. From an exhaustive set of candidate models, we selected the best input predictor variables, and data transformations for each geographic stratum in the GEDI domain to produce a set of comprehensive predictive footprint-level models. We found that model selection frequently favored combinations of RH metrics at the 98th, 90th, 50th, and 10th height above ground-level percentiles (RH98, RH90, RH50, and RH10, respectively), but that inclusion of lower RH metrics (e.g. RH10) did not markedly improve model performance. Second, forced inclusion of RH98 in all models was important and did not degrade model performance, and the best performing models were parsimonious, typically having only 1-3 predictors. Third, stratification by geographic domain (PFT, geographic region) improved model performance in comparison to global models without stratification. Fourth, for the vast majority of strata, the best performing models were fit using square root transformation of field AGBD and/or height metrics. There was considerable variability in model performance across geographic strata, and areas with sparse training data and/or high AGBD values had the poorest performance. These models are used to produce global predictions of AGBD, but will be improved in the future as more and better training data become available.
|
|
| 9. |
- Ellis, A. D., et al.
(författare)
-
Future Directions to Realize Ultra-High Bit-Rate Transmission Systems
- 2010
-
Ingår i: Proceedings of OptoElectronics and Communications Conference, OECC 2010, Sapporo, Japan, 5-9 July 2010, invited paper..
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this paper we examine two potential future directions for the realization of ultra-high bit rate transmission systems.
|
|
| 10. |
- Olsson, Samuel L I, 1984, et al.
(författare)
-
Optical Injection-Locking-Based Pump Recovery for Phase-Sensitively Amplified Links
- 2012
-
Ingår i: Optics InfoBase Conference Papers. - Washington, D.C. : OSA. - 2162-2701. - 9781467302623 ; , s. Art. no. 6192145-
-
Konferensbidrag (refereegranskat)abstract
- An injection-locking-based pump recovery system for phase-sensitively amplified links is proposed and studied experimentally. Measurements with 10 Gbaud DQPSK signals show penalty-free recovery of 0.8 GHz FWHM bandwidth pump with 63 dB overall amplification.
|
|
