| 1. |
- Falk, John, et al.
(författare)
-
Immersion freezing ability of freshly emitted soot with various physico-chemical characteristics
- 2021
-
Ingår i: Atmosphere. - : MDPI AG. - 2073-4433. ; 12:9
-
Tidskriftsartikel (refereegranskat)abstract
- The immersion freezing ability of soot particles has in previous studies been reported in the range of low/insignificant to very high. The aims of this study were to: (i) perform detailed physico-chemical characterisation of freshly produced soot particles with very different properties, (ii) investigate the immersion freezing ability of the same particles, and (iii) investigate the potential links between physico-chemical particle properties and ice-activity. A miniCAST soot generator was used to produce eight different soot samples representing a wide range of physico-chemical properties. A continuous flow diffusion chamber was used to study each sample online in immersion mode over the temperature (T) range from −41 to −32◦C, at a supersaturation of about 10% with respect to liquid water. All samples exhibited low to no heterogeneous immersion freezing. The most active sample reached ice-activated fractions (AF) of 10−3 and 10−4 at temperatures of 1.7 and 1.9 K, respectively, above the homogeneous freezing temperature. The samples were characterized online with respect to a wide range of physico-chemical properties including effective particle density, optical properties, particle surface oxidation and soot maturity. We did observe indications of increasing immersion freezing ice-activity with increasing effective particle density and increasing particulate PAH fraction . Hence, those properties, or other properties co-varying with those, could potentially enhance the immersion freezing ice-activity of the studied soot particle types. However, we found no significant correlation between the physico-chemical properties and the observed ice-nucleating ability when the particle ensemble was extended to include previously published results including more ice-active biomass combustion soot particles. We conclude that it does not appear possible in general and in any straightforward way to link observed soot particle physico-chemical properties to the ice-nucleating ability using the online instrumentation included in this study. Furthermore, our observations support that freshly produced soot particles with a wide range of physico-chemical properties have low to insignificant immersion freezing ice-nucleating ability.
|
|
| 2. |
|
|
| 3. |
- Korhonen, Kimmo, et al.
(författare)
-
Ice-nucleating ability of particulate emissions from solid-biomass-fired cookstoves : An experimental study
- 2020
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 20:8, s. 4951-4968
-
Tidskriftsartikel (refereegranskat)abstract
- This research was part of the Salutary Umeå Study of Aerosols in Biomass Cookstove Emissions (SUSTAINE) laboratory experiment campaign. We studied ice-nucleating abilities of particulate emissions from solid-fuel-burning cookstoves, using a portable ice nuclei counter, Spectrometer Ice Nuclei (SPIN). These emissions were generated from two traditional cookstove types commonly used for household cooking in sub-Saharan Africa and two advanced gasifier stoves under research to promote sustainable development alternatives. The solid fuels studied included biomass from two different African tree species, Swedish softwood and agricultural residue products relevant to the region. Measurements were performed with a modified version of the standard water boiling test on polydisperse samples from flue gas during burning and size-selected accumulation mode soot particles from a 15 m3 aerosol-storage chamber. The studied soot particle sizes in nanometers were 250, 260, 300, 350, 400, 450 and 500. From this chamber, the particles were introduced to water-supersaturated freezing conditions (-32 to-43 °C) in the SPIN. Accumulation mode soot particles generally produced an ice-activated fraction of 10-3 in temperatures 1-1.5 °C higher than that required for homogeneous freezing at fixed RHw D 115 %. In five special experiments, the combustion performance of one cookstove was intentionally modified. Two of these exhibited a significant increase in the icenucleating ability of the particles, resulting in a 10-3 ice activation at temperatures up to 5.9 °C higher than homogeneous freezing and the observed increased ice-nucleating ability. We investigated six different physico-chemical properties of the emission particles but found no clear correlation between them and increasing ice-nucleating ability. We conclude that the freshly emitted combustion aerosols form ice via immersion and condensation freezing at temperatures only moderately above homogeneous freezing conditions.
|
|
| 4. |
- Korhonen, Kimmo, et al.
(författare)
-
Particle emissions from a modern heavy-duty diesel engine as ice nuclei in immersion freezing mode: a laboratory study on fossil and renewable fuels
- 2022
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7324. ; 22:23, s. 1615-1631
-
Tidskriftsartikel (refereegranskat)abstract
- We studied ice-nucleating abilities of particulate emissions from a modern heavy-duty diesel engine using three different types of fuel. The polydisperse particle emissions were sampled during engine operation and introduced to a continuous-flow diffusion chamber (CFDC) instrument at a constant relative humidity RHwater=110 %, while the temperature was ramped between −43 and −32 ∘C (T scan). The tested fuels were EN 590 compliant low-sulfur fossil diesel, hydrotreated vegetable oil (HVO), and rapeseed methyl ester (RME); all were tested without blending. Sampling was carried out at different stages in the engine exhaust aftertreatment system, with and without simulated atmospheric processing using an oxidation flow reactor. In addition to ice nucleation experiments, we used supportive instrumentation to characterize the emitted particles for their physicochemical properties and presented six parameters. We found that the studied emissions contained no significant concentrations of ice-nucleating particles likely to be of atmospheric relevance. The substitution of fossil diesel with renewable fuels, using different emission aftertreatment systems such as a diesel oxidation catalyst, and photochemical aging of total exhaust had only minor effect on their ice-nucleating abilities.
|
|
| 5. |
- Kristensen, Thomas Bjerring, et al.
(författare)
-
Properties and emission factors of cloud condensation nuclei from biomass cookstoves - Observations of a strong dependency on potassium content in the fuel
- 2021
-
Ingår i: Atmospheric Chemistry And Physics. - : Nicolaus Copernicus University Press. - 1680-7316 .- 1680-7324. ; 21:10, s. 8023-8044
-
Tidskriftsartikel (refereegranskat)abstract
- Residential biomass combustion is a significant source of aerosol particles on regional and global scales influencing climate and human health. The main objective of the current study was to investigate the properties of cloud condensation nuclei (CCN) emitted from biomass burning of solid fuels in different cookstoves mostly of relevance to sub- Saharan east Africa.The traditional three-stone fire and a rocket stove were used for combustion of wood logs of Sesbania and Casuarina with birch used as a reference. A natural draft and a forced-draft pellet stove were used for combustion of pelletised Sesbania and pelletised Swedish softwood alone or in mixtures with pelletised coffee husk, rice husk or water hyacinth. The CCN activity and the effective density were measured for particles with mobility diameters of v65, v100 and v200 nm, respectively, and occasionally for 350 nm particles. Particle number size distributions were measured online with a fast particle analyser. The chemical composition of the fuel ash was measured by application of standard protocols.The average particle number size distributions were by number typically dominated by an ultrafine mode, and in most cases a soot mode was centred around a mobility diameter of v150 nm. The CCN activities decreased with increasing particle size for all experiments and ranged in terms of the hygroscopicity parameter, from v0:1 to v0:8 for the ultrafine mode and from v0:001 to v0:15 for the soot mode. The CCN activity of the ultrafine mode increased (i) with increasing combustion temperature for a given fuel, and (ii) it typically increased with increasing potassium concentration in the investigated fuels. The primary CCN and the estimated particulate matter (PM) emission factors were typically found to increase significantly with increasing potassium concentration in the fuel for a given stove. In order to link CCN emission factors to PM emission factors, knowledge about stove technology, stove operation and the inorganic fuel ash composition is needed. This complicates the use of ambient PM levels alone for estimation of CCN concentrations in regions dominated by biomass combustion aerosol, with the relation turning even more complex when accounting for atmospheric ageing of the aerosol.
|
|
