| 1. |
- Naqvi, Muhammad, et al.
(författare)
-
Polygeneration system integrated with small non-wood pulp mills for substitute natural gas production
- 2018
-
Ingår i: Applied Energy. - : Elsevier. - 0306-2619 .- 1872-9118. ; 224, s. 636-646
-
Tidskriftsartikel (refereegranskat)abstract
- This study aims to examine the potential substitute natural gas (SNG) production by integrating black liquor gasification (BLG) island with a small wheat straw-based non-wood pulp mills (NPM), which do not employ the black liquor recovery cycle. For such integration, it is important to first build knowledge on expected improvements in an overall integrated non-wood pulp mill energy system using the key performance indicators. O2-blown circulating fluidized bed (CFB) gasification with direct causticization is integrated with a reference small NPM to evaluate the overall performance. A detailed economic analysis is performed together with a sensitivity analysis based on variations in the rate of return due to varying biomass price, total capital investment, and natural gas prices. The quantitive results showed considerable SNG production but significantly reduced electricity production. There is a substantial CO2 abatement potential combining CO2 capture and CO2 mitigation from SNG use replacing compressed natural gas (CNG) or gasoline. The economic performance through sensitivity analysis reflects significant dependency on both substitute natural gas production and natural gas market price. Furthermore, the solutions to address the challenges and barriers for the successful commercial implementation of BLG based polygeneration system at small NPMs are discussed. The system performance and discussion on the real application of integrated system presented in this article form a vital literature source for future use by large number of small non-wood pulp industries.
|
|
| 2. |
- Farooq, U., et al.
(författare)
-
A step forward towards synthesizing a stable and regeneratable nanocomposite for remediation of trichloroethene
- 2018
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 347, s. 660-668
-
Tidskriftsartikel (refereegranskat)abstract
- Synthesizing supported heterogeneous catalysts is always considered as a persistent approach for degradation of contaminants. However, the stability of these nanocomposites and improvement of process conditions influencing target pollutants degradation are still limited. Herein, on the basis of self-adhesive nature of polydopamine (PDA) and its strong electrostatic interaction with metallic ions, we synthesized a facile, stable, magnetically separable, and environmentally benign PDA decorated, reduced graphene oxide (rGO) supported Fe nanocatalyst (PDA@Fe/rGO). The effects of process variables (pH, PDA@Fe/rGO, and persulphate (PS) dose) on the degradation performance of trichloroethene (TCE), a model chlorinated organic pollutant selected in this study, were investigated. PDA not only encapsulated the host Fe/rGO magnetic particles but also exhibited high magnetization. PDA wrapping tremendously enhanced the thermal stability of nanocatalyst with just 24.1% weight loss at elevated temperature compared to solo Fe/rGO (40.2%). Moreover, TCE degradation mechanism was interpreted by ESR and radical scavenger tests, validating OH[rad], SO4 [rad]− and O2 [rad]− radicals being responsible for TCE degradation. Considering its eminent catalytic activity, simple synthesis approach and excellent kinetics, this recyclable and improved PDA assisted Fe/rGO nanocatalyst further opens a door for practical implementation in the field of contaminated groundwater remediation.
|
|
| 3. |
- Farooq, U., et al.
(författare)
-
Efficient transformation in characteristics of cations supported-reduced graphene oxide nanocomposites for the destruction of trichloroethane
- 2017
-
Ingår i: Applied Catalysis A. - : Elsevier B.V.. - 0926-860X .- 1873-3875. ; 544, s. 10-20
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments were conducted to investigate the use of graphene-oxide supported metallic nanocomposites for improving the degradation of trichloroethane (TCA) by sodium percarbonate (SPC). Two methods of production, chemical reduction (CR) and solvo-thermal (ST), were tested for preparation of single (Fe) and binary (Fe-Cu) nanocomposites supported by reduced graphene oxide (rGO). A variety of analytical techniques including N2 adsorption Brunauer-Emmett-Teller (BET), x-ray diffraction (XRD), fourier-transfrom infrared spectroscopy (FTIR), and transmisison electron microscopy (TEM) were applied to characterize the physicochemical and microstructural properties of the synthesized nanocomposites. The characterization indicated that the CR method produced nanocomposites that comprised only mesoporous structure. Conversely, both micro and mesoporous structures were present for samples produced with the ST method. The synthesized single and bimetallic composites produced from the ST method showed higher surface areas, i.e. 93.6 m2/g and 119.2 m2/g as compared to the ones synthesized via the CR method, i.e. 13.8 m2/g and 38.0 m2/g respectively. The results of FTIR and XRD analyses confirmed that the ST method produced highly crystalline nanocomposites. SEM and TEM analysis validated that metallic particles with definite morphology well distributed on the surface of rGO. X-ray photoelectron spectroscopy (XPS) analysis confirmed the homogeneity nanocomposites and occurrence of variation in copper oxidation states during degradation process. EDS mapping validate the homogeneous distribution of Cu and Fe at reduced graphene oxide surface. The Fe-Cu/rGO (ST) activated SPC system effectively degraded TCA (92%) in 2.5 h at low nanocomposite dose compared to the Fe-Cu/rGO (CR) and only Fe, for which the maximum degradation efficiencies achieved were 81% and 34%. In conclusion, excellent catalytic characteristics were observed for the ST-synthesized single and bimetallic (Fe/rGO, Fe-Cu/rGO) catalysts. These catalysts were successful in improving the degradation of TCA via activated SPC.
|
|
| 4. |
- Naqvi, Salman Raza, et al.
(författare)
-
Pyrolysis of high-ash sewage sludge : Thermo-kinetic study using TGA and artificial neural networks
- 2018
-
Ingår i: Fuel. - Oxon, UK : Elsevier Ltd. - 0016-2361 .- 1873-7153. ; 233, s. 529-538
-
Tidskriftsartikel (refereegranskat)abstract
- Pyrolysis of high-ash sewage sludge (HASS) is a considered as an effective method and a promising way for energy production from solid waste of wastewater treatment facilities. The main purpose of this work is to build knowledge on pyrolysis mechanisms, kinetics, thermos-gravimetric analysis of high-ash (44.6%) sewage sludge using model-free methods & results validation with artificial neural network (ANN). TG-DTG curves at 5,10 and 20 °C/min showed the pyrolysis zone was divided into three zone. In kinetics, E values of models ranges are; Friedman (10.6–306.2 kJ/mol), FWO (45.6–231.7 kJ/mol), KAS (41.4–232.1 kJ/mol) and Popescu (44.1–241.1 kJ/mol) respectively. ΔH and ΔG values predicted by OFW, KAS and Popescu method are in good agreement and ranged from (41–236 kJ/mol) and 53–304 kJ/mol, respectively. Negative value of ΔS showed the non-spontaneity of the process. An artificial neural network (ANN) model of 2 * 5 * 1 architecture was employed to predict the thermal decomposition of high-ash sewage sludge, showed a good agreement between the experimental values and predicted values (R2 ⩾ 0.999) are much closer to 1. Overall, the study reflected the significance of ANN model that could be used as an effective fit model to the thermogravimetric experimental data. © 2018 Elsevier Ltd
|
|
