| 1. |
- Kristan, M., et al.
(författare)
-
The Eighth Visual Object Tracking VOT2020 Challenge Results
- 2020
-
Ingår i: Computer Vision. - Cham : Springer International Publishing. - 9783030682378 ; , s. 547-601
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2020 is the eighth annual tracker benchmarking activity organized by the VOT initiative. Results of 58 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The VOT2020 challenge was composed of five sub-challenges focusing on different tracking domains: (i) VOT-ST2020 challenge focused on short-term tracking in RGB, (ii) VOT-RT2020 challenge focused on “real-time” short-term tracking in RGB, (iii) VOT-LT2020 focused on long-term tracking namely coping with target disappearance and reappearance, (iv) VOT-RGBT2020 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2020 challenge focused on long-term tracking in RGB and depth imagery. Only the VOT-ST2020 datasets were refreshed. A significant novelty is introduction of a new VOT short-term tracking evaluation methodology, and introduction of segmentation ground truth in the VOT-ST2020 challenge – bounding boxes will no longer be used in the VOT-ST challenges. A new VOT Python toolkit that implements all these novelites was introduced. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net ).
|
|
| 2. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 3. |
- Zhang, S. N., et al.
(författare)
-
The high energy cosmic-radiation detection (HERD) facility onboard China's Space Station
- 2014
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 9780819496126
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads of the cosmic lighthouse program onboard China's Space Station, which is planned for operation starting around 2020 for about 10 years. The main scientific objectives of HERD are indirect dark matter search, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 104 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of seven X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side SKTs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV, 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R and D is under way for reading out the LYSO signals with optical fiber coupled to image intensified CCD and the prototype of one layer of CALO.
|
|
| 4. |
- Tommasini, R., et al.
(författare)
-
Accepted Tutorials at The Web Conference 2022
- 2022
-
Ingår i: WWW 2022 - Companion Proceedings of the Web Conference 2022. - New York, NY, USA : Association for Computing Machinery (ACM). ; , s. 391-399
-
Konferensbidrag (refereegranskat)abstract
- This paper summarizes the content of the 20 tutorials that have been given at The Web Conference 2022: 85% of these tutorials are lecture style, and 15% of these are hands on.
|
|
| 5. |
- Fuchs, M.a b, et al.
(författare)
-
Nonlinear X-ray compton scattering
- 2014
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- We use XFEL pulses to observe the most fundamental nonlinear X-ray-matter interaction: nonlinear Compton scattering. In contrast to theoretical predictions, we measure an anonymous and yet to be explained red-shift in the observed photon energy.
|
|
| 6. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 7. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 8. |
- Andersson, J. C., et al.
(författare)
-
Modeling the Äspö Pillar stability experiment
- 2010
-
Ingår i: Rock Mechanics in Civil and Environmental Engineering - Proceedings of the European Rock Mechanics Symposium, EUROCK 2010. - 9780415586542 ; , s. 787-790
-
Konferensbidrag (refereegranskat)abstract
- This paper presents results of the 1st stages ofTaskAof the Decovalex 2011 project, the numerical modeling of the Äspö Pillar Stability experiment performed by the Äspö Hard Rock Laboratory of the Swedish Nuclear Fuel and Waste Management Company (SKB). The objective is to perform back calculation of the Äspö pillar behavior using state of the art numerical modeling techniques for the material behavior. The work is divided into three stages and it is the first stage of thework that will be presented in this paper. Seven international teams from six different countries participated in the task and contributed to the results presented in this paper, concerning back calculation of uniaxial and triaxial compressive core testing and elastic back calculation of the stress path for excavation-induced stresses. The results are useful for understanding the occurrence of spalling in the upper part of the pillar during excavation and the stress path modeling gives the first approximation of the yielding strength of the pillar. The calculated results agree well with observations measured during experiment.
|
|
| 9. |
- Buchwitz, M., et al.
(författare)
-
The GHG-CCI project of ESA's climate change initiative : Data products and application
- 2016
-
Ingår i: Proceedings of Living Planet Symposium 2016. - 9789292213053 ; SP-740
-
Konferensbidrag (refereegranskat)abstract
- The goal of the GHG-CCI project (http://www.esa-ghg-cci.org/) of ESA's Climate Change Initiative (CCI) is to generate global atmospheric satellite-derived carbon dioxide (CO2) and methane (CH4) data sets as needed to improve our understanding of the regional sources and sinks of these important greenhouse gases (GHG). Here we present an overview about the latest data set called Climate Research Data Package No. 3 (CRDP3). We focus on the GHG-CCI project core data products, which are near-surface-sensitive column-averaged dry air mole fractions of CO2 and CH4, denoted XCO2 (in ppm) and XCH4 (in ppb) retrieved from SCIAMACHY/ENVISAT (2002-2012) and TANSO-FTS/GOSAT (2009-today) nadir mode radiance observations in the near-infrared/shortwave-infrared spectral region. The GHG-CCI products are primarily individual sensor Level 2 products. However, we also generate merged Level 2 products ("EMMA products"). Here we also present a first GHG-CCI Level 3 product, namely XCO2 and XCH4 in Obs4MIPs format (monthly, 5°×5°).
|
|
| 10. |
- Chen, Tianshi, et al.
(författare)
-
Regularized LTI System Identification with Multiple Regularization Matrix
- 2018
-
Ingår i: 18th IFAC Symposium on System Identification (SYSID), Proceedings. - : ELSEVIER SCIENCE BV. ; , s. 180-185
-
Konferensbidrag (refereegranskat)abstract
- Regularization methods with regularization matrix in quadratic form have received increasing attention. For those methods, the design and tuning of the regularization matrix are two key issues that are closely related. For systems with complicated dynamics, it would be preferable that the designed regularization matrix can bring the hyper-parameter estimation problem certain structure such that a locally optimal solution can be found efficiently. An example of this idea is to use the so-called multiple kernel Chen et al. (2014) for kernel-based regularization methods. In this paper, we propose to use the multiple regularization matrix for the filter-based regularization. Interestingly, the marginal likelihood maximization with the multiple regularization matrix is also a difference of convex programming problem, and a locally optimal solution could be found with sequential convex optimization techniques. (C) 2018, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved.
|
|
