SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Ferrari R.) ;hsvcat:2"

Sökning: WFRF:(Ferrari R.) > Teknik

  • Resultat 1-10 av 15
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Abata, E., et al. (författare)
  • Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV
  • 2010
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 621:1-3, s. 134-150
  • Tidskriftsartikel (refereegranskat)abstract
    • A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20-350 GeV and beam impact points and angles corresponding to pseudo-rapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit. (C) 2010 Published by Elsevier B.V.
  •  
2.
  • Boot-Handford, M. E., et al. (författare)
  • Carbon capture and storage update
  • 2014
  • Ingår i: Energy and Environmental Sciences. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 7:1, s. 130-189
  • Forskningsöversikt (refereegranskat)abstract
    • In recent years, Carbon Capture and Storage (Sequestration) (CCS) has been proposed as a potential method to allow the continued use of fossil-fuelled power stations whilst preventing emissions of CO2 from reaching the atmosphere. Gas, coat (and biomass)-fired power stations can respond to changes in demand more readily than many other sources of electricity production, hence the importance of retaining them as an option in the energy mix. Here, we review the leading CO2 capture technologies, available in the short and long term, and their technological maturity, before discussing CO2 transport and storage. Current pilot plants and demonstrations are highlighted, as is the importance of optimising the CCS system as a whole. Other topics briefly discussed include the viability of both the capture of CO2 from the air and CO2 reutilisation as climate change mitigation strategies. Finally, we discuss the economic and legal aspects of CCS.
  •  
3.
  • Blösch, Günter, et al. (författare)
  • Twenty-three unsolved problems in hydrology (UPH) - a community perspective
  • 2019
  • Ingår i: Hydrological Sciences Journal. - : Informa UK Limited. - 0262-6667 .- 2150-3435. ; 64:10, s. 1141-1158
  • Tidskriftsartikel (refereegranskat)abstract
    • This paper is the outcome of a community initiative to identify major unsolved scientific problems in hydrology motivated by a need for stronger harmonisation of research efforts. The procedure involved a public consultation through online media, followed by two workshops through which a large number of potential science questions were collated, prioritised, and synthesised. In spite of the diversity of the participants (230 scientists in total), the process revealed much about community priorities and the state of our science: a preference for continuity in research questions rather than radical departures or redirections from past and current work. Questions remain focused on the process-based understanding of hydrological variability and causality at all space and time scales. Increased attention to environmental change drives a new emphasis on understanding how change propagates across interfaces within the hydrological system and across disciplinary boundaries. In particular, the expansion of the human footprint raises a new set of questions related to human interactions with nature and water cycle feedbacks in the context of complex water management problems. We hope that this reflection and synthesis of the 23 unsolved problems in hydrology will help guide research efforts for some years to come.
  •  
4.
  • Ferrari, A. C., et al. (författare)
  • Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
  • 2015
  • Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 7:11, s. 4598-4810
  • Tidskriftsartikel (refereegranskat)abstract
    • We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.
  •  
5.
  • Agirre, J. A., et al. (författare)
  • The VALU3S ECSEL project : Verification and validation of automated systems safety and security
  • 2021
  • Ingår i: Microprocessors and microsystems. - : Elsevier BV. - 0141-9331 .- 1872-9436. ; 87, s. 104349-
  • Tidskriftsartikel (refereegranskat)abstract
    • Manufacturers of automated systems and their components have been allocating an enormous amount of time and effort in R&D activities, which led to the availability of prototypes demonstrating new capabilities as well as the introduction of such systems to the market within different domains. Manufacturers need to make sure that the systems function in the intended way and according to specifications. This is not a trivial task as system complexity rises dramatically the more integrated and interconnected these systems become with the addition of automated functionality and features to them. This effort translates into an overhead on the V&V (verification and validation) process making it time-consuming and costly. In this paper, we present VALU3S, an ECSEL JU (joint undertaking) project that aims to evaluate the state-of-the-art V&V methods and tools, and design a multi-domain framework to create a clear structure around the components and elements needed to conduct the V&V process. The main expected benefit of the framework is to reduce time and cost needed to verify and validate automated systems with respect to safety, cyber-security, and privacy requirements. This is done through identification and classification of evaluation methods, tools, environments and concepts for V&V of automated systems with respect to the mentioned requirements. VALU3S will provide guidelines to the V&V community including engineers and researchers on how the V&V of automated systems could be improved considering the cost, time and effort of conducting V&V processes. To this end, VALU3S brings together a consortium with partners from 10 different countries, amounting to a mix of 25 industrial partners, 6 leading research institutes, and 10 universities to reach the project goal.
  •  
6.
  • Ferrari, S., et al. (författare)
  • Visualizing Vortex Clusters in the Wake of a High-Speed Train
  • 2017
  • Ingår i: 2017 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN, AND CYBERNETICS (SMC). - 1062-922X. - 9781538616451 ; 2017-January, s. 683-688
  • Konferensbidrag (refereegranskat)abstract
    • Visualization of fluid flows at a high-Reynolds number (Re similar to 10(5)) presents difficulties for user comprehension due to density and ambiguous interactions between vortices. Prior work has used cluster-based reduced-order modelling (CROM) to analyze the wake of a High-Speed Train (HST) with Re = 86,000. In this paper, we present a novel surface visualization to convey the spatiotemporal changes undergone by clustered vortices in the HST wake. This visualization is accomplished through dimensional reduction of 3D volumetric vortices into 1D ridges, and physics-based feature tracking. The result is 3D surfaces visualizing the behavior of the vortices in the HST wake. Compared to conventional still-image representations, these surfaces allow the user to quickly compare and analyze the two shedding cycles identified via CROM. The spatiotemporal differences of the primary vortices in these shedding cycles provide analytic insight to influence the aerodynamics of the HST.
  •  
7.
  • Backes, Claudia, et al. (författare)
  • Production and processing of graphene and related materials
  • 2020
  • Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
  • Tidskriftsartikel (refereegranskat)abstract
    • We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
  •  
8.
  • Mullier, G.A., et al. (författare)
  • Operation and performance of the ATLAS semiconductor tracker in LHC Run 2
  • 2022
  • Ingår i: Journal of Instrumentation. - : IOP Publishing Ltd. - 1748-0221. ; 17:1
  • Tidskriftsartikel (refereegranskat)abstract
    • The semiconductor tracker (SCT) is one of the tracking systems for charged particles in the ATLAS detector. It consists of 4088 silicon strip sensor modules. During Run 2 (2015-2018) the Large Hadron Collider delivered an integrated luminosity of 156 fb−1 to the ATLAS experiment at a centre-of-mass proton-proton collision energy of 13 TeV. The instantaneous luminosity and pile-up conditions were far in excess of those assumed in the original design of the SCT detector. Due to improvements to the data acquisition system, the SCT operated stably throughout Run 2. It was available for 99.9% of the integrated luminosity and achieved a data-quality efficiency of 99.85%. Detailed studies have been made of the leakage current in SCT modules and the evolution of the full depletion voltage, which are used to study the impact of radiation damage to the modules. © 2022 CERNüäβ
  •  
9.
  • Viti, Leonardo, et al. (författare)
  • High-speed hBN/graphene/hBN room-temperature terahertz nano-receivers
  • 2021
  • Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; SPIE 11685
  • Konferensbidrag (refereegranskat)abstract
    • We report room temperature terahertz detection in hBN/graphene/hBN heterostructures. The obtained record combination of high-speed (response time < 1 ns) and high sensitivity (noise equivalent power ~ 100 pWHz-1/2) is enabled by the photo-thermoelectric effect.
  •  
10.
  • Viti, Leonardo, et al. (författare)
  • High-speed, low-noise thermoelectric graphene detectors at terahertz frequencies
  • 2020
  • Ingår i: International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz. - 2162-2027 .- 2162-2035. ; 2020-November, s. 302-302
  • Konferensbidrag (refereegranskat)abstract
    • We report room temperature terahertz detection in hBN/graphene/hBN heterostructures, integrated in top-gated field effect transistors. The record combination of high-speed (response time < 1 ns) and high sensitivity (noise equivalent power ~ 100 pWHz-1I2) is enabled by the photo-thermoelectric effect and paves the way for the design of ultrafast graphene arrays in the far infrared, opening concrete perspectives for targeting ultrafast applications.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 15
Typ av publikation
tidskriftsartikel (9)
konferensbidrag (3)
bokkapitel (2)
forskningsöversikt (1)
Typ av innehåll
refereegranskat (13)
övrigt vetenskapligt/konstnärligt (2)
Författare/redaktör
Moa, Torbjörn (2)
Laue, Jan (1)
Åkesson, Torsten (1)
Lund-Jensen, Bengt (1)
Ripellino, Giulia (1)
Strandberg, Jonas (1)
visa fler...
Zwalinski, L. (1)
Brenner, Richard (1)
Ekelöf, Tord (1)
Ellert, Mattias (1)
Asimakopoulou, Eleni ... (1)
Bergeås Kuutmann, El ... (1)
Ferrari, Arnaud, 197 ... (1)
Åkesson, T.P.A. (1)
Corrigan, E.E. (1)
Doglioni, C. (1)
Hansen, E. (1)
Hedberg, V. (1)
Jarlskog, G. (1)
Konya, B. (1)
Lytken, E. (1)
Mankinen, K.H. (1)
Marcon, C. (1)
Mjörnmark, J.U. (1)
Mullier, G.A. (1)
Poettgen, R. (1)
Skorda, E. (1)
Smirnova, O. (1)
Lundberg, Olof (1)
Shaheen, Rabia (1)
Shope, David R. (1)
Aleksa, M. (1)
Anghinolfi, F. (1)
Antonaki, A. (1)
Arabidze, G. (1)
Baker, O. K. (1)
Beck, H. P. (1)
Silverstein, Samuel ... (1)
Benchekroun, D. (1)
Benslama, K. (1)
Kuutmann, E. Bergeaa ... (1)
Binet, S. (1)
Bohm, Christian (1)
Boldea, V. (1)
Boonekamp, M. (1)
Bosman, M. (1)
Bourdarios, C. (1)
Calvet, D. (1)
Caprini, M. (1)
Carli, T. (1)
visa färre...
Lärosäte
Chalmers tekniska högskola (9)
Kungliga Tekniska Högskolan (5)
Stockholms universitet (3)
Lunds universitet (3)
Uppsala universitet (2)
Luleå tekniska universitet (1)
visa fler...
Linköpings universitet (1)
RISE (1)
Sveriges Lantbruksuniversitet (1)
visa färre...
Språk
Engelska (15)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (7)
Samhällsvetenskap (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy