| 1. |
- Forsberg, Fredrik, et al.
(författare)
-
CMOS-integrated Si/SiGe quantum-well infrared microbolometer focal plane arrays manufactured with very large-scale heterogeneous 3-d integration
- 2015
-
Ingår i: IEEE Journal of Selected Topics in Quantum Electronics. - : Institute of Electrical and Electronics Engineers Inc.. - 0792-1233 .- 1077-260X .- 1558-4542. ; 21:4
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate infrared focal plane arrays utilizing monocrystalline silicon/silicon-germanium (Si/SiGe) quantum-well microbolometers that are heterogeneously integrated on top of CMOS-based electronic read-out integrated circuit substrates. The microbolometers are designed to detect light in the long wavelength infrared (LWIR) range from 8 to 14 μm and are arranged in focal plane arrays consisting of 384 × 288 microbolometer pixels with a pixel pitch of 25 μm × 25 μm. Focal plane arrays with two different microbolometer designs have been implemented. The first is a conventional single-layer microbolometer design and the second is an umbrella design in which the microbolometer legs are placed underneath the microbolometer membrane to achieve an improved pixel fill-factor. The infrared focal plane arrays are vacuum packaged using a CMOS compatible wafer bonding and sealing process. The demonstrated heterogeneous 3-D integration and packaging processes are implemented at wafer-level and enable independent optimization of the CMOS-based integrated circuits and the microbolometer materials. All manufacturing is done using standard semiconductor and MEMS processes, thus offering a generic approach for integrating CMOS-electronics with complex miniaturized transducer elements
|
|
| 2. |
- Åström, E., et al.
(författare)
-
Precision measurements of linear scattering density using muon tomography
- 2016
-
Ingår i: Journal of Instrumentation. - : Institute of Physics Publishing. - 1748-0221. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that muon tomography can be used to precisely measure the properties of various materials. The materials which have been considered have been extracted from an experimental blast furnace, including carbon (coke) and iron oxides, for which measurements of the linear scattering density relative to the mass density have been performed with an absolute precision of 10%. We report the procedures that are used in order to obtain such precision, and a discussion is presented to address the expected performance of the technique when applied to heavier materials. The results we obtain do not depend on the specific type of material considered and therefore they can be extended to any application.
|
|
| 3. |
- Reyes Forsberg, Diana, et al.
(författare)
-
A method for chemical and physical modification of oriented pulp fibre sheets
- 2022
-
Ingår i: Cellulose. - : Springer Science and Business Media B.V.. - 0969-0239 .- 1572-882X. ; 29:15, s. 8371-8386
-
Tidskriftsartikel (refereegranskat)abstract
- Wood pulp fibres are promising reinforcements for biocomposites due to their renewable resource origin and mechanical properties. An oriented and dense fibre reinforcement structure is beneficial for biocomposite properties. We present a method of modifying fibres (e.g. to increase strain to failure) in pre-formed oriented high-density paper structures intended for biocomposites or as hot-pressed fibre materials. Mildly delignified, well-preserved holocellulose fibres from softwood are used. Cold alkali treatment (hemicellulose removal) and mercerisation (conversion to cellulose II) were carried out successfully on oriented fibre sheets. Controlled anisotropy and sheet density are achieved from untreated and straight fibres in the sheet formation step. High mechanical properties and increased ductility of mercerised sheets were observed, which may be valuable for hot-pressed fibre materials (E ≈ 7.1 GPa, strength of 108 MPa and strain to failure of 5.3%) and biocomposites. In contrast, modified wood pulp fibres were difficult to orient, resulting in higher sheet porosity and weak interfibre bonding. Graphical abstract: [Figure not available: see fulltext.]. © 2022, The Author(s).
|
|
