| 1. |
- Eberle, Sebastian, et al.
(författare)
-
Additive manufacturing of an AlSi40 mirror coated with electroless nickel for cryogenic space applications
- 2018
-
Ingår i: International Conference on Space Optics—ICSO 2018. - : SPIE - International Society for Optical Engineering.
-
Konferensbidrag (refereegranskat)abstract
- Advanced Manufacturing (AM) has the potential to improve existing technologies and applications in terms of performance, light-weighting and costs. In the context of the SME4ALM initiative, launched by DLR and ESA, the company Kampf Telescope Optics GmbH (KTO) in cooperation with the Fraunhofer Institute for Material and Beam Technology (IWS) have assessed the feasibility of AM to build a high-performance optical mirror for space applications. For the assessment of the AM potentials, a mirror design concept for cryogenic instruments for observations in the IR and NIR range was baselined. In a second step, Nickel-Phosphorus (NiP) was selected as optical coating. The combination of coating and mirror material is a primary design driver for optical performance. Both materials must have a very similar CTE as well as be compliant to modern optical manufacturing (diamond turning, polishing). As a promising candidate for NiP coating the AlSi40 was selected for the mirror structure. The potential advantages of AM for optical mirrors in terms of mechanical performance, cost, and manufacturing time were exploited. The achievement of those objectives was / will be demonstrated by:1. verifying AM material properties and manufacturability of AM mirrors by material sample tests and subcomponent tests2. designing AM mirror demonstrator by structural, thermal, and optical performance analysis3. applying and elaborating AM specific design methods (topology optimization, sandwich structures with internal microstructures, monolithic design, etc.)4. manufacturing, assembling, and testing AM mirror demonstrator to verify manufacturability and optical performance5. comparing optical and mechanical performance of the AM mirror demonstrator to a conventional mirror by numerical analysis to exploit potential advantages of AM
|
|
| 2. |
- Moritz, Juliane, et al.
(författare)
-
Electron beam powder bed fusion of γ‐titanium aluminide : Effect of processing parameters on part density, surface characteristics and aluminum content
- 2021
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- Gamma titanium aluminides are very interesting for their use in high‐performance applications such as aircraft engines due to their low density, high stiffness and favorable hightemperature properties. However, the pronounced brittleness of these intermetallic alloys is a major challenge for their processing through conventional fabrication methods. Additive manufacturing by means of electron beam powder bed fusion (EB‐PBF) significantly improves the processability of titanium aluminides due to the high preheating temperatures and facilitates complex components. The objective of this study was to determine a suitable processing window for EB‐PBF of the TNM‐B1 alloy (Ti‐43.5Al‐4Nb‐1Mo‐0.1B), using an increased aluminum content in the powder raw material to compensate for evaporation losses during the process. Design of experiments was used to evaluate the effect of beam current, scan speed, focus offset, line offset and layer thickness on porosity. Top surface roughness was assessed through laser scanning confocal microscopy. Scanning electron microscopy, electron backscatter diffraction (EBSD) and energydispersive X‐ray spectroscopy (EDX) were used for microstructural investigation and to analyze aluminum loss depending on the volumetric energy density used in EB‐PBF. An optimized process parameter set for achieving part densities of 99.9% and smooth top surfaces was derived. The results regarding microstructures and aluminum evaporation suggest a solidification via the β‐phase.
|
|
| 3. |
- Moritz, Juliane, et al.
(författare)
-
Influence of Electron Beam Powder Bed Fusion Process Parameters at Constant Volumetric Energy Density on Surface Topography and Microstructural Homogeneity of a Titanium Aluminide Alloy
- 2023
-
Ingår i: Advanced Engineering Materials. - : John Wiley & Sons. - 1438-1656 .- 1527-2648. ; 25:15
-
Tidskriftsartikel (refereegranskat)abstract
- In powder bed fusion additive manufacturing, the volumetric energy density E V is a commonly used parameter to quantify process energy input. However, recent results question the suitability of E V as a design parameter, as varying the contributing parameters may yield different part properties. Herein, beam current, scan velocity, and line offset in electron beam powder bed fusion (PBF-EB) of the titanium aluminide alloy TNM–B1 are systematically varied while maintaining an overall constant E V. The samples are evaluated regarding surface morphology, relative density, microstructure, hardness, and aluminum loss due to evaporation. Moreover, the specimens are subjected to two different heat treatments to obtain fully lamellar (FL) and nearly lamellar (NLγ) microstructures, respectively. With a combination of low beam currents, low-to-intermediate scan velocities, and low line offsets, parts with even surfaces, relative densities above 99.9%, and homogeneous microstructures are achieved. On the other hand, especially high beam currents promote the formation of surface bulges and pronounced aluminum evaporation, resulting in inhomogeneous banded microstructures after heat treatment. The results demonstrate the importance of considering the individual parameters instead of E V in process optimization for PBF-EB.
|
|
| 4. |
- Moritz, Juliane, et al.
(författare)
-
Influence of Two-Step Heat Treatments on Microstructure and Mechanical Properties of a β-Solidifying Titanium Aluminide Alloy Fabricated via Electron Beam Powder Bed Fusion
- 2023
-
Ingår i: Advanced Engineering Materials. - : John Wiley & Sons. - 1438-1656 .- 1527-2648. ; 25:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing technologies, particularly electron beam powder bed fusion (PBF-EB/M), are becoming increasingly important for the processing of intermetallic titanium aluminides. This study presents the effects of hot isostatic pressing (HIP) and subsequent two-step heat treatments on the microstructure and mechanical properties of the TNM-B1 alloy (Ti–43.5Al–4Nb–1Mo–0.1B) fabricated via PBF-EB/M. Adequate solution heat treatment temperatures allow the adjustment of fully lamellar (FL) and nearly lamellar (NL-β) microstructures. The specimens are characterized by optical microscopy and scanning electron microscopy (SEM), X-ray computed tomography (CT), X-ray diffraction (XRD), and electron backscatter diffraction (EBSD). The mechanical properties at ambient temperatures are evaluated via tensile testing and subsequent fractography. While lack-of-fusion defects are the main causes of failure in the as-built condition, the mechanical properties in the heat-treated conditions are predominantly controlled by the microstructure. The highest ultimate tensile strength is achieved after HIP due to the elimination of lack-of-fusion defects. The results reveal challenges originating from the PBF-EB/M process, for example, local variations in chemical composition due to aluminum evaporation, which in turn affect the microstructures after heat treatment. For designing suitable heat treatment strategies, particular attention should therefore be paid to the microstructural characteristics associated with additive manufacturing.
|
|
| 5. |
- Moritz, Juliane, et al.
(författare)
-
Locally Adapted Microstructures in an Additively Manufactured Titanium Aluminide Alloy Through Process Parameter Variation and Heat Treatment
- 2023
-
Ingår i: Advanced Engineering Materials. - : John Wiley & Sons. - 1438-1656 .- 1527-2648. ; 25:2
-
Tidskriftsartikel (refereegranskat)abstract
- Electron beam powder bed fusion (PBF-EB/M) has been attracting great research interest as a promising technology for additive manufacturing of titanium aluminide alloys. However, challenges often arise from the process-induced evaporation of aluminum, which is linked to the PBF-EB/M process parameters. This study applies different volumetric energy densities during PBF-EB/M processing to deliberately adjust the aluminum contents in additively manufactured Ti–43.5Al–4Nb–1Mo–0.1B (TNM-B1) samples. The specimens are subsequently subjected to hot isostatic pressing (HIP) and a two-step heat treatment. The influence of process parameter variation and heat treatments on microstructure and defect distribution are investigated using optical and scanning electron microscopy, as well as X-ray computed tomography (CT). Depending on the aluminum content, shifts in the phase transition temperatures can be identified via differential scanning calorimetry (DSC). It is confirmed that the microstructure after heat treatment is strongly linked to the PBF-EB/M parameters and the associated aluminum evaporation. The feasibility of producing locally adapted microstructures within one component through process parameter variation and subsequent heat treatment can be demonstrated. Thus, fully lamellar and nearly lamellar microstructures in two adjacent component areas can be adjusted, respectively.
|
|
| 6. |
- Willner, Robin, et al.
(författare)
-
Potential and challenges of additive manufacturing for topology optimized spacecraft structures
- 2020
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 32:3
-
Tidskriftsartikel (refereegranskat)abstract
- This study focused on the potential of topology optimization (TO) for metallic tertiary structures of spacecrafts produced by the additive manufacturing (AM) technique laser powder bed fusion. First, a screening of existing conventionally manufactured products was carried out to evaluate the benefits of a redesign concerning product performance and the associated economic impact. As a result of the study, the most suitable demonstrator was selected. This reference structure was redesigned by TO taking into consideration the AM process constraints. Another major aim of this work was to evaluate the possibilities and challenges of AM (accuracies, surface quality, process parameters, postmachining, and mechanical properties) in addition to the redesign process. A comprehensive approach was implemented including detailed analysis of the powder, mechanical properties, in-process parameters, and nondestructive inspection (NDI). All measured values were used for a back loop to the design process, thereby providing a final robust redesign. Finally, the fine-tuned demonstrator was built up in an iterative process. The parts were tested under representative conditions for the application to verify the performance. The demonstrator qualification test campaign contained thermal cycling, vibration testing, static load testing, and NDI. Thus, an improvement in technology readiness level up to "near flight qualified" was reached.
|
|
| 7. |
- Brandau, Benedikt, et al.
(författare)
-
Absorbance study of powder conditions for laser additive manufacturing
- 2022
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 216
-
Tidskriftsartikel (refereegranskat)abstract
- Absorbance is often used for simulations or validation of process parameters for powder-based laser materials processing. In this work, the absorbance of 39 metal powders for additive manufacturing is determined at 20 laser wavelengths. Different grain sizes and aging states for: steels, aluminum alloys, titanium alloys, Nitinol, high entropy alloy, chromium, copper, brass and iron ore were analyzed. For this purpose, the absorbance spectrum of the powders was determined via a dual-beam spectrometer in the range of λ = 330 - 1560 nm. At the laser wavelengths of λ = 450 nm, 633 nm and 650 nm, the absorbance averaged over all materials was found to increase by a factor of 2.4 up to 3.3 compared to the usual wavelength of λ = 1070 nm, with minimal variations in absorbance between materials. In the investigation of the aged or used powders, a loss of absorbance was detectable. Almost no changes from the point of view of processing aged and new AlSi10Mg powders, is expected for laser sources with λ = 450 nm. The resulting measurements provide a good basis for process parameters for a variety of laser wavelengths and materials, as well as a data set for improved absorbance simulations.
|
|
| 8. |
- Brueckner, Frank, et al.
(författare)
-
Enhanced manufacturing possibilities using multi-materials in laser metal deposition
- 2018
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 26:2, s. 10-12
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) addresses various benefits as the buildup of complex shaped parts, the possibility of functional integration, reduced lead times or the use of difficult machinable materials compared to conventional manufacturing possibilities. Beside these advantages, the use of more than one material in a component would strongly increase the field of applications in typical AM branches as energy, aerospace, or medical technology. By means of multi-material buildups, cost-intensive alloys could be only used in high-loaded areas of the part, whereas the remaining part could be fabricated with cheaper compositions. The selection of combined materials strongly depends on the requested thermophysical but also mechanical properties. Within this contribution, examples (e.g., used in the turbine business) show how alloys can be arranged to fit together, e.g., in terms of a well-chosen coefficient of thermal expansion. As can be seen in nature, the multi-material usage can be characterized by sharp intersections from one material to the other (e.g., in case of a thin corrosion protection), but also by graded structures enabling a smoother material transition (e.g., in case of dissimilar materials which are joined together without defects). The latter is shown for an example from aerospace within this paper. Another possibility is the simultaneous placement of several materials, e.g., hard carbide particles placed in a more ductile matrix composition. These particles can be varied in size (e.g., TiC versus WC). Also the ratio between carbides and matrix alloy can be adjusted depending on its application. Especially, nozzle-based free form fabrication technologies, e.g., laser metal deposition, enable the utilization of more than one material. Within this contribution, possibilities to feed more than one filler material are demonstrated. In addition, results of multi-material processes are shown. Finally, this work focuses on different (potential) applications, mainly on power generation, but also for medical technology or wear resistant components.
|
|
| 9. |
- Brueckner, Frank, et al.
(författare)
-
Fabrication of metallic multi-material components using Laser Metal Deposition
- 2017
-
Ingår i: Solid Freeform Fabrication 2017. - : The University of Texas at Austin. ; , s. 2530-2538
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Meanwhile, Laser Metal Deposition (LMD) is a well-known Additive Manufacturing technology used in various industrial branches as energy, tooling or aerospace. It can be used for the fabrication of new components but also repair applications. So far, volume build-ups were mostly carried out with one single material only. However, loading conditions may strongly vary and, hence, the use of more than one material in a component would yield major benefits. By means of multi-material build-ups, cost-intensive alloys could be used in highly-loaded areas of the part, whereas the remaining part could be fabricated with cheaper compositions. The selection of combined materials strongly depends on the requested thermo-physical and mechanical properties. Within this contribution, possibilities of material combinations by LMD and selected examples of beneficial multi-material use are presented.
|
|
| 10. |
- Fedina, Tatiana, et al.
(författare)
-
Laser-assisted reduction of iron ore using aluminum powder
- 2023
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 35:2
-
Tidskriftsartikel (refereegranskat)abstract
- This study reports on the laser-assisted reduction of iron ore waste using Al powder as areducing agent. Due to climate change and the global warming situation, it has become ofparamount importance to search for and/or develop green and sustainable processes for ironand steel production. In this regard, a new method for iron ore utilization is proposed in thiswork, investigating the possibility of iron ore waste reduction via metallothermic reaction withAl powder. Laser processing of iron ore fines was performed, focusing on the Fe2O3-Alinteraction behavior and extent of the iron ore reduction. The reaction between the materialsproceeded in a rather intense uncontrolled manner which led to a formation of Fe-rich domainsand alumina as two separate phases. In addition, a combination of Al2O3 and Fe2O3 melts aswell as transitional areas such as intermetallics were observed, suggesting the occurrence ofincomplete reduction reaction in isolated regions. The reduced iron droplets were prone toacquire a sphere-like shape and concentrated mainly near the surface of the Al2O3 melt or at theinterface with the iron oxide. Both SEM, EDS and WDS analyses were employed to analyzechemical composition, microstructure and morphological appearances of the reaction products.High-speed imaging was used to study the process phenomena and observe differences in themovement behavior of the particles. Furthermore, the measurements acquired from X-raycomputed microtomography revealed that approximately 2.4 % of iron was reduced during thelaser processing of Fe2O3-Al powder bed, most likely due to insufficient reaction time orinappropriate equivalence ratio of the two components.
|
|
