| 1. |
- Arvizu, Miguel A, et al.
(författare)
-
Electrochemical pretreatment of electrochromic WO3 films gives greatly improved cycling durability
- 2018
-
Ingår i: Thin Solid Films. - : ELSEVIER SCIENCE SA. - 0040-6090 .- 1879-2731. ; 653, s. 1-3
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochromic WO3 thin films have important applications in devices such as smart windows for energy-efficient buildings. Long-term electrochemical cycling durability of these films is essential and challenging. Here we investigate reactively sputter-deposited WO3 films, backed by indium-tin oxide layers and immersed in electrolytes of LiClO4 in propylene carbonate, and demonstrate unprecedented electrochemical cycling durability after straight-forward electrochemical pretreatments by the application of a voltage of 6 V vs. Li/Li+ for several hours.
|
|
| 2. |
- Arvizu, Miguel A., et al.
(författare)
-
Electrochromic dc sputtered W1-x-y Moy Tix O3 thin films: : Optical properties and durability.
- 2016
-
Konferensbidrag (refereegranskat)abstract
- The key component in an electrochromic (EC) device is its primary EC thin film. The outstanding intrinsic ECproperties of tungsten oxide (WO3) make this material the best option available for the cathodic layer in an ECdevice. Nevertheless much research remains in order to optimize WO3 with regard to optical properties, durability,etc. It is well known that addition of titanium (Ti) into the matrix of WO3 increases significantly the resistance of the film to electrochemical cycling both under norma loperation and during accelerated aging in extended voltage ranges [1]. On the other hand, using molybdenum (Mo) as an additive in small concentrations helps to improve the color rendering by shifting th eposition of the maximum of the coloration band to higher energies [2]. The present work reports our recent investigations on thin films of mixed oxides with a focus on ways to optimize tungsten oxide thin films regarding both their durability and color by the addition of Ti and Mo. The films were deposited by reactive DC cosputtering from Mo and W-Ti alloy targets. Cyclic voltammetry, in a three-electrode system consisting of the film and lithium foils, was performed in a solution 1 MLiClO4 in propylene carbonate (Li–PC) as electrolyte. Insitu and ex-situ optical characterization was done for the EC films, and the transmittance switching and coloration efficiency were determined. Durability was studied by analyzing how the charge density evolved and how rapidly the transmittance modulation deteriorated during cycling for the different concentrations of Mo and Ti .References[1] M.A. Arvizu, C.A. Triana, B.I. Stefanov, C.G.Granqvist , G.A. Niklasson, “Electrochromism in SputterdepositedW-Ti Oxide Films: Durability Enhancement dueto Ti”, Solar Energy Materials & Solar Cells 125 (2014)184-189 (and references therein).[2] M.A. Arvizu, C.G. Granqvist and G.A. Niklasson,“Electrochromism in sputter deposited W1–yMoyO3 thinfilms”, Journal of Physics: Conference Series 682 (2016)012005 (and references therein).
|
|
| 3. |
- Arvizu, Miguel A, et al.
(författare)
-
Electrochromic W(1-x-y)Ti(x)lo(y)O(3) Thin Films Made by Sputter Deposition : Large Optical Modulation, Good Cycling Durability, and Approximate Color Neutrality
- 2017
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 29:5, s. 2246-2253
-
Tidskriftsartikel (refereegranskat)abstract
- Tungsten oxide thin films are used in electrochromic devices such as variable-transmittance "smart windows" for energy efficient buildings with good indoor comfort. Two long-standing issues for WO3 thin films are their limited durability under electrochemical cycling and their blue color in transmission. Here, we show that both of these problems can be significantly alleviated by additions of titanium and molybdenum. We found that similar to 300 nm-thick films of sputter deposited W1-x-yTixMoyO3 are able to combine a midluminous transmittance modulation of 0.4 similar to 70% with good color neutrality and durability under extended electrochemical cycling. The Ti content should be similar to 10 at. % in order to achieve durability without impairing transmittance modulation significantly, and the Mo content preferably should be no larger than 6 at. % in order to maintain durability. Hence, our results give clear guidelines for making three-component mixed-oxide thin films that are suitable for electrochromic "smart windows".
|
|
| 4. |
- Arvizu, Miguel A., et al.
(författare)
-
Electrochromism in DC sputtered W1-yMoyO3 thin films
- 2015
-
Ingår i: INERA Conference 2015. - : Institute of Physics (IOP).
-
Konferensbidrag (refereegranskat)abstract
- Electrochromic (EC) properties of tungsten–molybdenum oxide (W1–yMoyO3) thin films were investigated. The films were deposited on indium tin oxide covered glass by reactive DC sputtering from tungsten and molybdenum targets. Elemental compositions of the W1–yMoyO3 films were determined by Rutherford back scattering. Voltammetric cycling was performed in an electrolyte of 1 M LiClO4 in propylene carbonate. The increase in molybdenum content in the EC films caused both a shift towards higher energies and a quenching of the value of the maximum of the coloration band, as compared with WO3 EC films. Durability was also diminished for W1–yMoyO3 EC films.
|
|
| 5. |
- Arvizu, Miguel A, et al.
(författare)
-
Electrochromism in sputter-deposited W-Ti oxide films : Durability enhancement due to Ti
- 2014
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248 .- 1879-3398. ; 125, s. 184-189
-
Tidskriftsartikel (refereegranskat)abstract
- Thin films of W-Ti oxide were prepared by reactive DC magnetron sputtering and were characterized by Rutherford bathcattering spectrometry, X-ray diffraction, scanning electron microscopy and atomic force microscopy. The electrochromic properties were studied by cyclic voltammetry in an electrolyte of lithium perchlorate in propylene carbonate and by optical transmittance measurements. The addition of Ti significantly promoted the amorphous nature of the films and stabilized their electrochemical cycling performance and dynamic range for electrochromism. (C) 2014 Elsevier B.V. All rights reserved.
|
|
| 6. |
- Arvizu, Miguel, et al.
(författare)
-
Galvanostatic ion de-trapping rejuvenates oxide thin films
- 2015
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 7:48, s. 26387-26390
-
Tidskriftsartikel (refereegranskat)abstract
- Ion trapping under charge insertion-extraction is well-known to degrade the electrochemical performance of oxides. Galvano-static treatment was recently shown capable to rejuvenate the oxide, but the detailed mechanism remained uncertain. Here we report on amorphous electrochromic (EC) WO3 thin films prepared by sputtering and electrochemically cycled in a lithium-containing electrolyte under conditions leading to severe loss of charge exchange capacity and optical modulation span. Time-of-flight elastic recoil detection analysis (ToF-ERDA) documented pronounced Li+ trapping associated with the degradation of the EC properties and, importantly, that Li+ detrapping, caused by a weak constant current drawn through the film for some time, could recover the original EC performance. Thus, ToF-ERDA provided direct and unambiguous evidence for Li+ detrapping.
|
|
| 7. |
- Atak, Gamze, et al.
(författare)
-
The role of oxygen to argon gas flow ratio on the durability of sputter-deposited electrochromic tungsten oxide films
- 2021
-
Ingår i: EMRS Fall Meeting 2021.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Materials that are able to vary their transparency and coloration reversibly when they are subjected to an electrical current or voltage are referred to as “electrochromic” (EC). High optical transmittance modulation and long service lifetime are apparent requirements for EC materials used in smart windows technology. An extended service lifetime is provided by the long-term durability of the materials. One important aspect of durability is the ability to sustain charge transport between the EC film and electrolyte, or between the two EC films in a device, for many hundreds or thousands of cycles without any significant changes in the performance such as optical modulation and inserted-extracted charge. The purpose of this study is to clarify the effects of the oxygen-argon gas flow ratio during sputter deposition on the durability of WO3 films. In this study, the oxygen to argon gas-flow ratio was modulated by setting the O2 flow rate to 7.5, 15.0, 22.5, and 45.0 ml min-1 and using a fixed Ar flow rate of 50 ml min-1. Thus, the oxygen to argon gas-flow ratio was varied from 0.15 to 0.90. The pressure in the sputter plasma was set as 30 mTorr and the sputter power was maintained at 200 W. For durability studies, cyclic voltammetry data were recorded for up to 500 cycles between 2.0 and 4.0 V versus Li/Li+ at a scan rate of 20 mV s-1. High oxygen to argon gas ratio was found to have a positive effect on the EC properties of the films. When the long-term performance of the films was examined, it was seen that all the samples displayed a slow decline of the colored-state transmittance due to ion accumulation in the host material. After 500 color-bleach cycles, the maximum optical transmittance modulation between colored and bleached states at a wavelength of 528 nm was 63.6% when the oxygen to argon gas-flow ratio was 0.90.
|
|
| 8. |
- Avendano, Esteban, et al.
(författare)
-
Sputter Deposited Electrochromic Films and Devices Based on These : Progress on nickel-oxide-based films
- 2007
-
Ingår i: Materials Science & Engineering. - : Elsevier BV. - 0921-5107 .- 1873-4944. ; 138:2, s. 112-117
-
Tidskriftsartikel (refereegranskat)abstract
- This paper introduces electrochromic (EC) devices, capable of changing their optical absorption under charge insertion/extraction, and some of the required materials. Special attention is given to EC nickel-oxide-based films, for which we discuss sputter deposition and ensuing optical and structural properties. The paper is concluded with some recent results for practical foil-based devices.
|
|
| 9. |
- Backholm, Jonas, et al.
(författare)
-
Iridium-based oxides: Recent advances in coloration mechanism, structural and morphological characterization
- 2008
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248 .- 1879-3398. ; 92:2, s. 91-96
-
Tidskriftsartikel (refereegranskat)abstract
- Films of iridium-tantalum oxide and iridium oxide have been prepared by sputtering and studied regarding their structure and electrochemical properties. X-ray diffraction and transmission electron microscopy showed an average grain size of 3-4 nm for both films. Point energy dispersive X-ray spectrometry showed an inhomogeneous distribution of iridium and tantalum indicating that the iridium-tantalum oxide may be a mixture of small IrO2 and Ta2O5 grains, which is consistent with the determined composition IrTa1.4O5.6. X-ray photoelectron spectroscopy gave valuable information on the stabilization process of the as-deposited films involving an uptake of oxygen, and on a coloration mechanism only including protons.
|
|
| 10. |
- Baloukas, Bill, et al.
(författare)
-
Galvanostatic Rejuvenation of Electrochromic WO3 Thin Films : Ion Trapping and Detrapping Observed by Optical Measurements and by Time-of-Flight Secondary Ion Mass Spectrometry
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 9:20, s. 16996-17002
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochromic (EC) smart windows are able to decrease our energy footprint while enhancing indoor comfort and convenience. However, the limited durability of these windows, as well as their cost, result in hampered market introduction. Here, we investigate thin films of the most widely studied EC material, WO3. Specifically, we combine optical measurements (using spectrophotometry in conjunction with variable-angle spectroscopic ellipsometry) with time-of-flight secondary ion mass spectrometry and atomic force microscopy. Data were taken on films in their as-deposited state, after immersion in a Li-ion-conducting electrolyte, after severe degradation by harsh voltammetric cycling and after galvanostatic rejuvenation to regain the original EC performance. Unambiguous evidence was found for the trapping and detrapping of Li ions in the films, along with a thickness increase or decrease during degradation and rejuvenation, respectively. It was discovered that (i) the trapped ions exhibited a depth gradient; (ii) following the rejuvenation procedure, a small fraction of the Li ions remained trapped in the film and gave rise to a weak short-wavelength residual absorption; and (iii) the surface roughness of the film was larger in the degraded state than in its virgin and rejuvenated states. These data provide important insights into the degradation mechanisms of EC devices and into means of achieving improved durability.
|
|
