| 1. |
- Zhang, Li, et al.
(författare)
-
Numerical simulation of natural convection and heat transfer in a molten pool with embedded cooling tubes
- 2022
-
Ingår i: Frontiers in Energy Research. - : Frontiers Media SA. - 2296-598X. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- This study described the natural circulation and heat transfer of a molten pool in a specifically designed core catcher conceived for a pressurized water reactor. In addition to external cooling, the core catcher features internal cooling tubes embedded in the molten pool. To investigate the coolability in such a configuration, first, a full-scale core catcher simulation is conducted to give a preliminary study under a real SA situation. Results illustrated that cooling efficiency can be remarkably enhanced due to the inner tubes. Then a test facility of the 2D slice with the geometrical scaled factor of 1:4 has been developed, and molten salt (NaNO3-KNO3) experiments will be implemented in the near future. This study also performed a pre-test simulation using molten NaNO3-KNO3 as a stimulant to study the heat transfer and flow characteristics of the salt pool. The melt convection in the test section was represented by a two-dimensional mesh with a WMLES turbulence model using the FLUENT code. The simulation captured the heat transfer enhancement by the cooling tubes as expected, and the results would help decide the proper test matrix and improvement of instrumentation required to obtain the necessary data for code validation.
|
|
| 2. |
- Zhang, Wei, et al.
(författare)
-
Balancing Adsorption, Catalysis, and Desorption in Cathode Catalyst For Li–S Batteries
- 2023
-
Ingår i: Advanced Energy Materials. - 1614-6832 .- 1614-6840. ; 13:43
-
Tidskriftsartikel (refereegranskat)abstract
- The complicated electrochemical catalytic conversion process of polysulfides in metal–sulfur batteries involves three steps: adsorption, catalysis, and desorption process. Even as huge efforts are made for the understanding of the separate steps (especially for the adsorption and catalysis process), research focusing on the entire process is still scarce. Herein, a series of cobalt phosphides (CoP, CoP2, and CoP3) is employed with identical hollow morphology as model electrocatalysts to investigate the significance of the desorption process and discuss the balancing among the adsorption, catalysis, and desorption of lithium polysulfides (LiPSs). The experimental data demonstrate that, compared to CoP and CoP3, CoP2 exhibits moderate adsorption of LiPSs, which enhances the reduction kinetics of S8 to Li2S and regulates the desorption of short-chain LiPSs. Theoretical calculations further confirm that CoP2 with moderate adsorption of LiPSs exhibits better redox kinetics of LiPSs compared to CoP and CoP3. Moderate adsorption enables the CoP2-based sulfur cathode to deliver excellent stability with 86% capacity retention (2.6 and 2.0 times higher than CoP and CoP3, respectively) over 1000 cycles at 1 C. All these results indicate that in the adsorption-catalysis-desorption chain for LiPSs, all steps need to be considered rather than just focusing on one step of the process.
|
|
| 3. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 4. |
- Guo, Si-pu, et al.
(författare)
-
Condensation and evaporation heat transfer characteristics in horizontal smooth, herringbone and enhanced surface EHT tubes
- 2015
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310. ; 85, s. 281-291
-
Tidskriftsartikel (refereegranskat)abstract
- An experimental investigation was performed to evaluate convective condensation and evaporation of R22, R32 and R410A inside a smooth tube (inner diameter 11.43 mm), a herringbone tube (fin root diameter 11.43 mm) and a newly developed enhanced surface EHT tube (inner diameter 11.5 mm) at low mass fluxes. The inner surface of the EHT tube is enhanced by dimple/protrusion and secondary petal arrays. For condensation, the heat transfer coefficient of the herringbone tube is 2.0-3.0 times larger than a smooth tube and the EHT tube is 1.3-1.95 times that of the smooth tube. The heat transfer enhancement ratios of the herringbone tube and the EHT tube are larger than their respective inner surface area ratios. Mass flux has a non-monotonic relation with the condensation heat transfer coefficient in the herringbone microfin tubes; this was especially evident for R32 and R410A. For evaporation, the EHT tube provides the best evaporation heat transfer performance for all the three refrigerants; this is mainly due to the heat transfer enhancement produced from the larger number of nucleation sites, increased interfacial turbulence, boundary layer disruption, flow separation and secondary flow generation caused by the dimple and petal arrays. The evaporation heat transfer coefficient of the herringbone tube is only slightly higher than that of the smooth tube. Overall, the EHT tube provides increased heat transfer enhancement for both condensation and evaporation. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
| 5. |
- Han, Ning, et al.
(författare)
-
Lowering the kinetic barrier via enhancing electrophilicity of surface oxygen to boost acidic oxygen evolution reaction
- 2024
-
Ingår i: Matter. - 2590-2393 .- 2590-2385. ; 7:3, s. 1330-1343
-
Tidskriftsartikel (refereegranskat)abstract
- The acidic oxygen evolution reaction (OER) is essential for many renewable energy conversion and storage technologies. However, the high energy required to break the strong covalent O-H bond of H2O in acidic media results in sluggish OER kinetics. Here, we report the critical role of iron in a new family of iron-containing yttrium ruthenate (Y2-xFexRu2O7-δ) electrocatalysts in highly increasing the electrophilicity of surface oxygen, leading to a significant reduction of the kinetics barrier by 33%, thus an exceptional OER mass activity of 1,021 A· up to 12.4 and 7.7 times that of Y2Ru2O7-δ and RuO2, respectively. Introducing iron reduces the Mulliken atomic charge on the O sites in the generated Ru-O-Fe structure, thereby facilitating the acid-base nucleophilic assault from H2O and reducing the free energy on the rate-determining step of OER. This work provides an effective strategy to reduce the kinetics barrier to achieve highly efficient and economic OER in acidic conditions.
|
|
| 6. |
- Xiao, Tianxiao, et al.
(författare)
-
Autonomous self-healing hybrid energy harvester based on the combination of triboelectric nanogenerator and quantum dot solar cell
- 2024
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855 .- 2211-3282. ; 125
-
Tidskriftsartikel (refereegranskat)abstract
- Realization of multi-source energy harvesting with one single device would maximize power output. Thus, it is emerging as a promising strategy towards renewable energy generation and has attracted worldwide attention in the past decades. Capable of capturing mechanical energy that is ubiquitous in the ambient environment, triboelectric nanogenerator (TENG) has been considered a novel yet effective source towards next-generation energy harvesting. In this work, a flexible hybrid energy harvester (HEH) is developed via the rational integration of autonomous self-healing TENG and high bending-stable lead sulfide quantum dot (PbS QD) solar cell, enabling independent electricity generation by two different mechanisms. The single-electrode mode TENG component with self-healing is realized by a polydimethylsiloxane/Triton X-100 (PDMS/TX100) mixture as the dielectric layer and the shared gold (Au) electrode, which generates 0.39 µA of output current (Iout), 24.6 V of output voltages (Vout), 15.4 nC of transfer charges (Qsc), and 7.80 mW m−2 of output power peak density. The thin-film solar cell component is based on a PbS QD layer as the light absorber with a planar structure fabricated under low-cost and compatible conditions, achieving 22.8 mA cm−2 of short-circuit current density (Jsc) and 4.92% of power conversion efficiency (PCE). As a proof of concept, an electronic watch is successfully powered by harnessing ambient mechanical and solar energy with a hybridized energy cell. This approach will offer more opportunities to construct a versatile platform towards remote monitoring and smart home systems.
|
|
| 7. |
- Yu, Jiangfei, et al.
(författare)
-
Numerical investigation in chaos characteristics of macro-mixing efficiency of two-dimensional supersonic mixing layer
- 2015
-
Ingår i: Proceedings of the Institution of Mechanical Engineers. Part G: Journal of Aerospace Engineering. - : SAGE Publications. - 0954-4100 .- 2041-3025. ; 229:7, s. 1226-1235
-
Tidskriftsartikel (refereegranskat)abstract
- Coherent structures of two-dimensional supersonic turbulent mixing layers with the engineering background have been investigated numerically with large eddy simulation method. The chaos characteristics of transverse sections of mixing layer flowfield have been obtained through the analyses of two chaos characteristic parameters, Lyapunov exponent and correlation dimension. The results show that under the conditions of the present numerical simulations and physical models, the distribution of correlation dimension is roughly consistent with that of streamwise turbulent intensity at transverse sections of mixing layers through analysis of nonlinear time series, as may be used to measure the macro-mixing efficiency of mixing layers quantitatively. The distribution of maximal Lyapunov exponent could be used to validate the quantitative results. Therefore, a potential experimental method measuring the thickness of mixing layers with low costs on the basis of chaos characteristic parameters has been proposed firstly.
|
|
| 8. |
- Farahini, Nasim, et al.
(författare)
-
39.9 GOPs/watt multi-mode CGRA accelerator for a multi-standard basestation
- 2013
-
Ingår i: 2013 IEEE International Symposium on Circuits and Systems (ISCAS). - : IEEE. - 9781467357609 ; , s. 1448-1451
-
Konferensbidrag (refereegranskat)abstract
- This paper presents an industrial case study of using a Coarse Grain Reconfigurable Architecture (CGRA) for a multi-mode accelerator for two kernels: FFT for the LTE standard and the Correlation Pool for the UMTS standard to be executed in a mutually exclusive manner. The CGRA multi-mode accelerator achieved computational efficiency of 39.94 GOPS/watt (OP is multiply-add) and silicon efficiency of 56.20 GOPS/mm2. By analyzing the code and inferring the unused features of the fully programmable solution, an in-house developed tool was used to automatically customize the design to run just the two kernels and the two efficiency metrics improved to 49.05 GOPS/watt and 107.57 GOPS/mm2. Corresponding numbers for the ASIC implementation are 63.84 GOPS/watt and 90.91 GOPS/mm2. Though the ASIC’s silicon and computational efficiency numbers are slightly better, the engineering efficiency of the pre-verified/characterized CGRA solution is at least 10X better than the ASIC solution.
|
|
| 9. |
|
|
| 10. |
- Liang, Hsin Li, et al.
(författare)
-
Design of corrosion-resistant high-entropy alloys through valence electron concentration and new PHACOMP
- 2021
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 883
-
Tidskriftsartikel (refereegranskat)abstract
- Various methods can be used to predict the phase composition of conventional alloys. However, it is relatively difficult to predict high-entropy alloys (HEAs) owing to their complexity. There remain many challenges in designing HEAs with desirable properties. In this study, two strategies were applied to design corrosion-resistant non-equal-molar CoCrFeMoNi HEAs with a single phase. The two strategies were prediction for valence electron concentration dependent structural behavior to evaluate the matrix of HEAs, and average D-orbital energy level (M̅d) that was initially used to predict precipitation in superalloys under different temperatures. The validity of these two approaches was determined by thermal stability. The corrosion behaviors of the designed HEAs were investigated by polarization tests. In conclusion, the phase compositions of CoCrFeMoNi HEAs were predicted using a combination of the two approaches. The corrosion resistance was also competitive compared to that of Hastelloy C276. This research can provide a reference for the future development of corrosion-resistant HEAs with a single phase.
|
|
