| 1. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 2. |
- Andersson, Martin, et al.
(författare)
-
LTNE approach and simulation for anode-supported SOFCs
- 2009
-
Ingår i: [Host publication title missing]. ; , s. 539-549
-
Konferensbidrag (refereegranskat)abstract
- Fuel cells are promising for future energy systems, since they are energy efficient and, when hydrogen is used as fuel, there are no emissions of greenhouse gases. Fuel cells have during recent years various improvements, however the technology is still in the early phases of development, this can be noted by the lack of dominant design both for singe fuel cells, stacks and for entire fuel cell systems. In this study a CFD approach (COMSOL Multiphysics) is employed to investigate the effect on temperature distribution from inlet temperature, oxygen surplus, ionic conductivity and current density for an anode-supported intermediate temperature solid oxide fuel cell (IT-SOFC). The developed model is based on the governing equations of heat-, mass- and momentum transport. A local temperature non equilibrium (LTNE) approach is introduced to calculate the temperature distribution in the gas- and solid phase separately. The results show that the temperature increasing along the flow direction is controlled by the degree of surplus air. It is also found that the ohmic polarization in the electrolyte and the activation polarization in the anode and cathode have major influence on the performance. If a count flow approach is employed the inlet temperature for the fuel stream should be close to the outlet temperature for the air flow to avoid a too high temperature gradient.
|
|
| 3. |
- Andersson, Martin, et al.
(författare)
-
Modeling Validation and Simulation of an Anode Supported SOFC including Mass and Heat Transport, Fluid Flow and Chemical Reactions
- 2011
-
Ingår i: ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. - 9780791854693 ; , s. 317-327
-
Konferensbidrag (refereegranskat)abstract
- Fuel cells are electrochemical devices that directly transform chemical energy into electricity, which are promising for future energy systems, since they are energy efficient and, when hydrogen is used as fuel, there are no direct emissions of greenhouse gases. The cell performance depends strongly on the material characteristics, the operating conditions and the chemical reactions that occur inside the cell. The chemical- And electrochemical reaction rates depend on temperature, material structure, catalytic activity, degradation and the partial pressures for the different species components. There is a lack of information, within the open literature, concerning the fundamentals behind these reactions. Experimental as well as modeling studies are needed to reduce this gap. In this study experimental data collected from an intermediate temperature standard SOFC with H2/H2O in the fuel stream are used to validate a previously developed computational fluid dynamics model based on the finite element method. The developed model is based on the governing equations of heat and mass transport and fluid flow, which are solved together with kinetic expressions for internal reforming reactions of hydrocarbon fuels and electrochemistry. This model is further updated to describe the experimental environment concerning cell design. Discussion on available active area for electrochemical reactions and average ionic transport distance from the anodic- to the cathodic three-phase boundary (TPB) are presented. The fuel inlet mole fractions are changed for the validated model to simulate a H2/H2O mixture and 30 % pre-reformed natural gas.
|
|
| 4. |
- Brønsted, Jeppe, et al.
(författare)
-
Palpability Support Demonstrated
- 2007
-
Ingår i: Embedded and Ubiquitous Computing/Lecture Notes in Computer Science. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 0302-9743 .- 1611-3349. - 9783540770916 ; 4808, s. 294-308
-
Konferensbidrag (refereegranskat)abstract
- In ubiquitous computing, as more and more devices are embedded into the environment, there is a risk that the user loses the understanding of the system. In normal use this is not always a problem, but when breakdowns occur it is crucial that the user understands the system to be able to handle the situation. The concept of palpable computing, introduced by the PalCom project, denotes systems which support such understandability. In PalCom, a set of prototype scenarios provide input for an open software architecture and a conceptual framework for palpable computing. One of these prototype scenarios is based on the Active Surfaces concept in which therapists rehabilitate physically and mentally impaired children by means of an activity that stimulates the children both physically and cognitively. In this paper we demonstrate how palpability can be supported in a prototype of the Active Surfaces. Services on the tiles have been developed using the PalCom service framework that allows them to be combined into PalCom assemblies. The support for palpability is shown by examples of use scenarios from the work of the therapist who can inspect and alter the runtime state of the tiles to change their configuration and cope with breakdown situations. The prototype implementation runs on a standard PC simulating the network layer and a first reference implementation has been made on the target embedded platform.
|
|
| 5. |
- Farahini, Nasim, et al.
(författare)
-
39.9 GOPs/watt multi-mode CGRA accelerator for a multi-standard basestation
- 2013
-
Ingår i: 2013 IEEE International Symposium on Circuits and Systems (ISCAS). - : IEEE. - 9781467357609 ; , s. 1448-1451
-
Konferensbidrag (refereegranskat)abstract
- This paper presents an industrial case study of using a Coarse Grain Reconfigurable Architecture (CGRA) for a multi-mode accelerator for two kernels: FFT for the LTE standard and the Correlation Pool for the UMTS standard to be executed in a mutually exclusive manner. The CGRA multi-mode accelerator achieved computational efficiency of 39.94 GOPS/watt (OP is multiply-add) and silicon efficiency of 56.20 GOPS/mm2. By analyzing the code and inferring the unused features of the fully programmable solution, an in-house developed tool was used to automatically customize the design to run just the two kernels and the two efficiency metrics improved to 49.05 GOPS/watt and 107.57 GOPS/mm2. Corresponding numbers for the ASIC implementation are 63.84 GOPS/watt and 90.91 GOPS/mm2. Though the ASIC’s silicon and computational efficiency numbers are slightly better, the engineering efficiency of the pre-verified/characterized CGRA solution is at least 10X better than the ASIC solution.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Kristan, Matej, et al.
(författare)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 10. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
