| 1. |
- Abdollahi Sani, Negar, et al.
(författare)
-
All-printed diode operating at 1.6 GHz
- 2014
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:33, s. 11943-11948
-
Tidskriftsartikel (refereegranskat)abstract
- Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (IoT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within IoT applications.
|
|
| 2. |
|
|
| 3. |
- Andersson Ersman, Peter, et al.
(författare)
-
Screen printed digital circuits based on vertical organicelectrochemical transistors
- 2017
-
Ingår i: Flexible and Printed Electronics. - : IOP Publishing. - 2058-8585. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Vertical organic electrochemical transistors (OECTs) have been manufactured solely using screenprinting. The OECTs are based on PEDOT:PSS (poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid)), which defines the active material for both the transistor channel and the gateelectrode. The resulting vertical OECT devices and circuits exhibit low-voltage operation, relativelyfast switching, small footprint and high manufacturing yield; the last three parameters are explainedby the reliance of the transistor configuration on a robust structure in which the electrolyte verticallybridges the bottom channel and the top gate electrode. Two different architectures of the verticalOECT have been manufactured, characterized and evaluated in parallel throughout this report. Inaddition to the experimental work, SPICE models enabling simulations of standalone OECTs andOECT-based circuits have been developed. Our findings may pave the way for fully integrated, lowvoltageoperating and printed signal processing systems integrated with e.g. printed batteries, solarcells, sensors and communication interfaces. Such technology can then serve a low-cost basetechnology for the internet of things, smart packaging and home diagnostics applications.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Brännvall, Rickard, 1975-, et al.
(författare)
-
Cost Optimization for the Edge-Cloud Continuum by Energy-Aware Workload Placement
- 2023
-
Ingår i: Companion Proceedings of the 14th ACM International Conference on Future Energy Systems. - : Association for Computing Machinery. ; , s. 79-84
-
Konferensbidrag (refereegranskat)abstract
- This article investigates the problem of where to place the computation workload in an edge-cloud network topology considering the trade-off between the location-specific cost of computation and data communication. For this purpose, a Monte Carlo simulation model is defined that accounts for different workload types, their distribution across time and location, as well as correlation structure. Results confirm and quantify the intuition that optimization can be achieved by distributing a part of cloud computation to make efficient use of resources in an edge data center network, with operational energy savings of 4–6% and up to 50% reduction in its claim for cloud capacity.
|
|
| 7. |
- Denby, B. R., et al.
(författare)
-
Road salt emissions : A comparison of measurements and modelling using the NORTRIP road dust emission model
- 2016
-
Ingår i: Atmospheric Environment. - : Elsevier Ltd. - 1352-2310 .- 1873-2844. ; 141, s. 508-522
-
Tidskriftsartikel (refereegranskat)abstract
- De-icing of road surfaces is necessary in many countries during winter to improve vehicle traction. Large amounts of salt, most often sodium chloride, are applied every year. Most of this salt is removed through drainage or traffic spray processes but a certain amount may be suspended, after drying of the road surface, into the air and will contribute to the concentration of particulate matter. Though some measurements of salt concentrations are available near roads, the link between road maintenance salting activities and observed concentrations of salt in ambient air is yet to be quantified. In this study the NORTRIP road dust emission model, which estimates the emissions of both dust and salt from the road surface, is applied at five sites in four Nordic countries for ten separate winter periods where daily mean ambient air measurements of salt concentrations are available. The model is capable of reproducing many of the salt emission episodes, both in time and intensity, but also fails on other occasions. The observed mean concentration of salt in PM10, over all ten datasets, is 4.2 μg/m3 and the modelled mean is 2.8 μg/m3, giving a fractional bias of −0.38. The RMSE of the mean concentrations, over all 10 datasets, is 2.9 μg/m3 with an average R2 of 0.28. The mean concentration of salt is similar to the mean exhaust contribution during the winter periods of 2.6 μg/m3. The contribution of salt to the kerbside winter mean PM10 concentration is estimated to increase by 4.1 ± 3.4 μg/m3 for every kg/m2 of salt applied on the road surface during the winter season. Additional sensitivity studies showed that the accurate logging of salt applications is a prerequisite for predicting salt emissions, as well as good quality data on precipitation. It also highlights the need for more simultaneous measurements of salt loading together with ambient air concentrations to help improve model parameterisations of salt and moisture removal processes. © 2016 The Authors
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
