| 1. |
- Abdollahi Sani, Negar, et al.
(författare)
-
All-printed diode operating at 1.6 GHz
- 2014
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:33, s. 11943-11948
-
Tidskriftsartikel (refereegranskat)abstract
- Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (IoT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within IoT applications.
|
|
| 2. |
- Andersson, Mats R., et al.
(författare)
-
Electroluminescence from Substituted Poly(thiophenes) : From Blue to Near-Infrared
- 1995
-
Ingår i: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 28:22, s. 7525-7529
-
Tidskriftsartikel (refereegranskat)abstract
- We report a systematic approach to the control of the conjugation length along the poly(thiophene) backbone. The planarity of the main chain can be permanently modified by altering the pattern of substitution and character of the substituents on the poly(thiophene) chain, and the conjugation length is thus modified. We obtain blue, green, orange, red, and near-infrared electroluminescence from four chemically distinct poly(thiophenes). The external quantum efficiencies are in the range of 0.01-0.6%.
|
|
| 3. |
- Andersson Ersman, Peter, et al.
(författare)
-
Screen printed digital circuits based on vertical organicelectrochemical transistors
- 2017
-
Ingår i: Flexible and Printed Electronics. - : IOP Publishing. - 2058-8585. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Vertical organic electrochemical transistors (OECTs) have been manufactured solely using screenprinting. The OECTs are based on PEDOT:PSS (poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid)), which defines the active material for both the transistor channel and the gateelectrode. The resulting vertical OECT devices and circuits exhibit low-voltage operation, relativelyfast switching, small footprint and high manufacturing yield; the last three parameters are explainedby the reliance of the transistor configuration on a robust structure in which the electrolyte verticallybridges the bottom channel and the top gate electrode. Two different architectures of the verticalOECT have been manufactured, characterized and evaluated in parallel throughout this report. Inaddition to the experimental work, SPICE models enabling simulations of standalone OECTs andOECT-based circuits have been developed. Our findings may pave the way for fully integrated, lowvoltageoperating and printed signal processing systems integrated with e.g. printed batteries, solarcells, sensors and communication interfaces. Such technology can then serve a low-cost basetechnology for the internet of things, smart packaging and home diagnostics applications.
|
|
| 4. |
- Andersson, Mats R., et al.
(författare)
-
Synthesis of poly(alkylthiophenes) for light-emitting diodes
- 1995
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 71:1-3, s. 2183-2184
-
Tidskriftsartikel (refereegranskat)abstract
- We have demonstrated a general way to tune the emission of poly(alkylthiophenes) by using steric interaction between the repeating units. Light-emitting diodes prepared of the polymers have blue to near-infrared emission.
|
|
| 5. |
- Berggren, Magnus, et al.
(författare)
-
Controlling colour by voltage in polymer light emitting diodes
- 1995
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 71:1-3, s. 2185-2186
-
Tidskriftsartikel (refereegranskat)abstract
- We report electroluminescence using different substituted polythiophenes as the emitting mterial. Different substituents cause different sterical interacion which force the thiophene rings out of planarity. This results in different bandgaps. Colours from blue to near infrared have been demonstrated in electroluminescent devices. We also demonstrate voltage controlled electroluminescence using mixtures of these polymers.
|
|
| 6. |
- Berggren, Magnus, et al.
(författare)
-
Green Electroluminescence in Poly-(3-cyclohexylthiophene) light-emitting diodes
- 1994
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlag Berlin. - 0935-9648 .- 1521-4095. ; 6:6, s. 488-490
-
Tidskriftsartikel (refereegranskat)abstract
- Electoluminescent devices based on polythiophene-system this films have been demonstrated that together span the entire visible range, steric hindrance being used to vary the bandgap between compunds. Poly-(3-cyclohexylthiophene), see Figures, exhibits green electoluminescence. Possible interpretations of this observation are proposed.
|
|
| 7. |
- Berggren, Magnus, et al.
(författare)
-
Light-emitting diodes with variable colours from polymer blends
- 1994
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 372:6505, s. 444-446
-
Tidskriftsartikel (refereegranskat)abstract
- THE range of materials now available for polymer-based light-emitting diodes (LEDs) is such that electroluminescence can be obtained throughout the visible spectrum(1-12). Here we show that, by blending polymers with different emission and charge-transport characteristics, LEDs can be fabricated in which the emission colour varies as a function of the operating voltage. This phenomenon arises from the self-organizing properties of the blends, in which entropy drives phase separation of the constituent polymers and gives rise to submicrometre-sized domains having a range of compositions and emission characteristics. Emission from domains of different composition is controlled by the ease with which charge is injected, which in turn depends on the applied voltage.
|
|
| 8. |
- Berggren, Magnus, et al.
(författare)
-
Polymer light-emitting diodes placed in microcavities
- 1996
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 76:1-3, s. 121-123
-
Tidskriftsartikel (refereegranskat)abstract
- The use of resonant optical microcavities to influence the emission properties of conjugated polymer light-emitting diodes (LEDs) is reported. The microcavities, which are built using metallic mirrors and polymeric spacers, incorporate polymer LEDs in between the mirrors. We report experimental results of polymer LEDs based on substituted polythiophenes. The effects include substantial narrowing of the spectral width of the emitted light, enhancement of the emission at the microcavity resonance, and coupling of two emission processes to different resonance modes in the same cavity.
|
|
| 9. |
- Berggren, Magnus, et al.
(författare)
-
Thermal control of near‐infrared and visible electroluminescence in alkyl‐phenyl substituted polythiophenes
- 1994
-
Ingår i: Applied Physics Letters. - : American Institute of Physics (AIP). - 0003-6951 .- 1077-3118. ; 65:12, s. 1489-1491
-
Tidskriftsartikel (refereegranskat)abstract
- We report electroluminescence from a regioregular alkyl-phenyl substituted polythiophene. The polymer film exists in two forms, giving widely different optical absorption, as well as photoluminescence and electroluminescence spectra. In the low-bandgap form, we observe high emission intensity centered at 1.55 eV (800 nm), well into the infrared, while the high-bandgap form gives a maximum at 1.85 eV (670 nm). The conversion from the high-bandgap form to the low-bandgap form can be done by thermal treatment of the polymer light emitting diodes.
|
|
| 10. |
- Berggren, Magnus, et al.
(författare)
-
White light from an electroluminescent diode made from poly[3(4‐octylphenyl)‐2,2′‐bithiophene] and an oxadiazole derivative
- 1994
-
Ingår i: Journal of Applied Physics. - : American Institute of Physics (AIP). - 0021-8979 .- 1089-7550. ; 76:11, s. 7530-7534
-
Tidskriftsartikel (refereegranskat)abstract
- We report on an electroluminescent diode emitting red, green, and blue light simultaneously. The device is based on a thin polymer layer, poly[3‐(4‐octylphenyl)‐2,2′‐bithiophene] and a thick molecular layer, 2‐(4‐biphenylyl)‐5‐(4‐tertbutyl‐phenyl)1,3,5‐oxadiazole. The quantum efficiency for light conversion is 0.3% and the turn‐on voltage for light emission is 7 V. In this article we present electric and spectroscopic characterizations. A mechanism for the light emission, based on electron and hole recombination between the two organic layers, is proposed
|
|
