| 1. |
- Gustafsson, Oscar, et al.
(författare)
-
Long-wavelength infrared quantum-dot based interband photodetectors
- 2011
-
Ingår i: Infrared physics & technology. - : Elsevier BV. - 1350-4495 .- 1879-0275. ; 54:3, s. 287-291
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the design and fabrication of (Al)GaAs(Sb)/InAs tensile strained quantum-dot (QD) based detector material for thermal infrared imaging applications in the long-wavelength infrared (LWIR) regime. The detection is based on transitions between confined dot states and continuum states in a type-II band lineup, and we therefore refer to it as a dot-to-bulk (D2B) infrared photodetector with expected benefits including long carrier lifetime due to the type-II band alignment, suppressed Shockley-Read-Hall generation-recombination due to the relatively large-bandgap matrix material, inhibited Auger recombination processes due to the tensile strain and epitaxial simplicity. Metal-organic vapor-phase epitaxy was used to grow multiple (Al)GaAs(Sb) QD layers on InAs substrates at different QD nominal thicknesses, compositions, doping conditions and multilayer periods, and the material was characterized using atomic force and transmission electron microscopy, and Fourier-transform infrared absorption spectroscopy. Dot densities up to 1 x 10(11) cm(-2), 1 x 10(12) cm(-2) and 3 x 10(10) cm(-2) were measured for GaAs, AlGaAs and GaAsSb QDs, respectively. Strong absorption in GaAs, AlGaAs and GaAsSb multilayer QD samples was observed in the wavelength range 6-12 mu m. From the wavelength shift in the spectral absorption for samples with varying QD thickness and composition it is believed that the absorption is due to an intra- valance band transition. From this it is possible to estimate the type-II inter-band transition wavelength, thereby suggesting that (Al)GaAs(Sb) QD/InAs heterostructures are suitable candidates for LWIR detection and imaging.
|
|
| 2. |
- Stevens, R., et al.
(författare)
-
Microstructured photonic crystal for single-mode long wavelength VCSELs
- 2008
-
Ingår i: Semiconductor Lasers and Laser Dynamics III. - : SPIE.
-
Konferensbidrag (refereegranskat)abstract
- In this article, we report on long wavelength (1.27 ÎŒm) single-mode micro-structured photonic crystal strained InGaAs quantum wells VCSELs for optical interconnection applications. Single fundamental mode room-temperature continuous-wave lasing operation was demonstrated for devices designed and processed with different two-dimensional etched patterns. The conventional epitaxial structure was grown by Metal-Organic Vapor Phase Epitaxy (MOVPE) and contains fully doped GaAs/AlGaAs DBRs, one oxidation layer and three strained InGaAs quantum wells. The holes were etched half-way through the top-mirror following various designs (triangular and square lattices) and with varying hole's diameters and pitches. We obtained up to 1.7 mW optical output power and more than 30 dB Side-Mode Suppression Ratio (SMSR) at room temperature and in continuous wave operation. Systematic static electrical, optical and spectral characterization was performed on wafer using an automated probe station. Numerical modeling using the MIT Photonic-Bands (MPB [1]) package of the transverse modal behaviors in the photonic crystal was performed using the plane wave method in order to understand the index-guiding effects of the chosen patterns, and to further optimize the design structures for mode selection at the given wavelength.
|
|
| 3. |
- Gilet, Ph., et al.
(författare)
-
1.3 μm VCSELs : InGaAs/GaAs, GaInNAs/GaAs multiple quantum wells and InAs/GaAs quantum dots- Three candidates as active material
- 2007
-
Ingår i: Vertical - Cavity Surface - Emitting Lasers XI. - San Jose, CA : SPIE. ; , s. F4840-F4840
-
Konferensbidrag (refereegranskat)abstract
- In this article, we report our results on 1.3ÎŒm VCSELs for optical interconnection applications. Room temperature continuous-wave lasing operation is demonstrated for top emitting oxide-confined devices with three different active materials, highly strained InGaAs/GaAs(A) and GalnNAs/GaAs (B) multiple quantum wells (MQW) or InAs/GaAs (C) quantum dots (QD). Conventional epitaxial structures grown respectively by Metal Organic Vapour Phase Epitaxy (MOVPE), Molecular Beam Epitaxy (MBE) and MBE, contain rully doped GaAs/AlGaAs DBRs. All three epilayers are processed in the same way. Current and optical confinement are realized by selective wet oxidation. Circular apertures from 2 ÎŒm to 16 ÎŒm diameters are defined. At room temperature and in continuous wave operation, all three systems exhibit lasing operation at wavelengths above 1 275nm and reached 1 300nm for material (A). Typical threshold currents are in the range [1-10]mA and are strongly dependent firstly on oxide diameter and secondly on temperature. Room temperature cw maximum output power corresponds respectively to 1.77mW, 0.5mW and 0.6mW. By increasing driving current, multimode operation occurs at different level depending on the oxide diameter. In case (A), non conventional modal behaviors will be presented and explained by the presence of specific oxide modes. Thermal behaviors of the different devices have been compared. In case (A) and (C) we obtain a negative T0. We will conclude on the different active materials in terms of performances with respect to 1300nm VCSEL applications.
|
|
| 4. |
- Hammar, Mattias, et al.
(författare)
-
1.3-mu m InGaAs vertical-cavity surface-emitting lasers
- 2005
-
Ingår i: 2005 IEEE LEOS Annual Meeting Conference Proceedings (LEOS). - 0780392175 ; , s. 396-397
-
Konferensbidrag (refereegranskat)abstract
- We report on the fabrication and performance of N-free InGaAs/GaAs 1.3-mu m range vertical-cavity surface-emitting lasers (VCSELs). Using optimized quantum-well (QW) growth conditions in combination with negative gain-cavity tuning, high-performance VCSELs with emission wavelength up to 1300 nm are realized. The performance figures include mA-range threshold currents, mW-range singlemode output power, continuous-wave operation up to 140 degrees C and 10 Gbit/s data transmission.
|
|
| 5. |
- Kopp, C., et al.
(författare)
-
Very compact FTTH Diplexer design using advanced wafer level fabrication methods
- 2008
-
Ingår i: MICRO-OPTICS 2008. - Strasbourg : SPIE.
-
Konferensbidrag (refereegranskat)abstract
- FTTH networks require implementing a diplexer at each user termination. According to most of the standards, this diplexer detects a download signal beam at 1.49ÎŒm and emits an upload signal beam at 1.31ÎŒm on the same single mode fibre. Both signals exhibit datarate speed below 2.5Gbps. Today, most of the diplexers are obtained by actively aligning a set of individual optoelectronic components and micro-optics. However, new manufacturing solutions satisfying very low cost and mass production capability requirements of this market would help to speed the massive spreading of this technology. In this paper, we present an original packaging design to manufacture Diplexer Optical Sub-Assembly for FTTH application. A dual photodiode is stacked over a VCSEL and detects both the download signal beam at 1.49ÎŒm passing through the laser and one part of the upload signal beam at 1.31ÎŒm for monitoring. To satisfy this approach, an innovative VCSEL has been designed to have a very high transmission at 1.49ÎŒm. All these components are mounted on a very small circuit board on glass including also integrated circuits such as transimpedance amplifier. So, the device combines advanced optoelectronic components and highly integrated Multi-Chip-Module on glass approach using collective wafer-level assembling technologies. For the single mode fibre optical coupling, active and passive alignment solutions are considered.
|
|
| 6. |
- Pougeoise, E., et al.
(författare)
-
1.3 ÎŒm strained InGaAs quantum well VCSELs : Operation characteristics and transverse modes analysis
- 2006
-
Ingår i: Vertical-Cavity Surface-Emitting Lasers X. - San Jose, CA : SPIE. ; , s. 13207-13207
-
Konferensbidrag (refereegranskat)abstract
- We report results on strained InGaAs quantum well Vertical Cavity Surface Emitting Lasers (VCSELs) for optical interconnection applications. The structure was grown by metalorganic vapour-phase epitaxy (MOVPE) and processed as top p-type DBR oxide-confined device. Our VCSELs exhibit low threshold currents and deliver up to 1.77 mW in continuous wave operation at room temperature. Fundamental mode continuous-wave lasing at wavelengths beyond 1300 nm is demonstrated at room temperature. The thermal behaviour of our devices is explained through the threshold current-temperature characteristics. Furthermore, the effective index model is used to understand the modal behaviour.
|
|
| 7. |
- Pougeoise, E., et al.
(författare)
-
Experimental characteristics and analysis of transverse modes in 1.3 μm strained InGaAs quantum well VCSELs
- 2006
-
Ingår i: Proc SPIE Int Soc Opt Eng. - : SPIE. - 0819462411 - 9780819462411
-
Konferensbidrag (refereegranskat)abstract
- In the context of optical interconnection applications, we report on results obtained on strained InGaAs quantum well Vertical Cavity Surface Emitting Lasers (VCSELs). Our devices are top p-type DBR oxide-confined VCSEL, grown by metalorganic vapour-phase epitaxy (MOVPE). These lasers exhibit low threshold currents and deliver up to 1.77 mW in continuous wave operation at room temperature. Fundamental mode continuous-wave lasing at wavelengths beyond 1300 nm at room temperature is reached for a 4 μm oxide diameter VCSEL. The particular design of the active layer based on a large detuning between the gain maximum and the cavity resonance gives our devices a very specific thermal and modal behaviour. Therefore, we study the spectral and spatial distributions of the transverse modes by near field scanning optical microscopy using a micropolymer tip at the end of an optical fibre.
|
|
| 8. |
- Pougeoise, E., et al.
(författare)
-
Experimental study of the lasing modes of 1.3-ÎŒm highly strained InGaAs-GaAs quantum-well oxide-confined VCSELs
- 2009
-
Ingår i: IEEE Photonics Technology Letters. - 1041-1135 .- 1941-0174. ; 21:6, s. 377-379
-
Tidskriftsartikel (refereegranskat)abstract
- We present an experimental study of the main modes involved in the emission properties of InGaAs-GaAs quantum-well oxide-confined long wavelength vertical-cavity surface-emitting lasers. Lasing properties are dominated by the so-called "oxide modes" and by aperture modes, respectively, for small and large driving currents. We present complementary investigations of the laser emission including far-field angular distribution and spectroscopic near-field optical microscopy to a better understanding of the nature of the "oxide modes."
|
|
| 9. |
- Söderberg, E., et al.
(författare)
-
Single mode 1.28 ÎŒm InGaAs VCSELs using an inverted surface relief
- 2006
-
Ingår i: Conference Digest - IEEE International Semiconductor Laser Conference. ; , s. 123-124
-
Konferensbidrag (refereegranskat)abstract
- High performance 1.28 Όm InGaAs single mode VCSELs have been fabricated using an inverted surface relief to relax critical fabrication tolerances. Higher order mode suppression >30 dB and 10 Gbps modulation are demonstrated up to 85°C.
|
|
| 10. |
|
|
