| 1. |
|
|
| 2. |
- Ali, Hasan, 1985-, et al.
(författare)
-
Atomic resolution energy-loss magnetic chiral dichroism measurements enabled by patterned apertures
- 2020
-
Ingår i: Physical Review Research. - College Park USA. - 2643-1564. ; 2:2
-
Tidskriftsartikel (refereegranskat)abstract
- Electron energy-loss magnetic chiral dichroism (EMCD) has the potential to measure magnetic properties of the materials at atomic resolution but the complex distribution of magnetic signals in the zone axis and the overlapping diffraction discs at higher beam convergence angles make the EMCD signal acquisition challenging. Recently, the use of ventilator apertures to acquire the EMCD signals with atomic resolution was proposed. Here we give the experimental demonstration of several types of ventilator apertures and obtain a clear EMCD signal at beam semiconvergence angles of 5 mrad. To simplify the experimental procedures, we propose a modified ventilator aperture which not only simplifies the complex scattering conditions but reduces the influence of lens aberrations on the EMCD signal as compared to the originally proposed ventilator apertures. In addition, this modified aperture can be used to analyze magnetic crystals with various symmetries and we demonstrate this feature by acquiring EMCD signals on different zone axis orientations of an Fe crystal. With the same aperture we obtain EMCD signals with convergence angles corresponding to atomic resolution electron probes. After the theoretical demonstration of the EMCD signal on a zone axis orientation at high beam convergence angles, this work thus overcomes the experimental and methodological hurdles and enables atomic resolution EMCD on the zone axis by using apertures.
|
|
| 3. |
- Ali, Hasan, 1985-, et al.
(författare)
-
Quantitative EMCD by use of a double aperture for simultaneous acquisition of EELS
- 2019
-
Ingår i: Ultramicroscopy. - : Elsevier BV. - 0304-3991 .- 1879-2723. ; 196, s. 192-196
-
Tidskriftsartikel (refereegranskat)abstract
- The weak signal strength in electron magnetic circular dichroism (EMCD) measurements remains one of the main challenges in the quantification of EMCD related EELS spectra. As a consequence, small variations in peak intensity caused by changes of background intervals, choice of method for extraction of signal intensity and equally differences in sample quality can cause strong changes in the EMCD signal. When aiming for high resolution quantitative EMCD, an additional difficulty consists in the fact that the two angular resolved EELS spectra needed to obtain the EMCD signal are taken at two different instances and it cannot be guaranteed that the acquisition conditions for these two spectra are identical. Here, we present an experimental setup where we use a double hole aperture in the transmission electron microscope to obtain the EMCD signal in a single acquisition. This geometry allows for the parallel acquisition of the two electron energy loss spectra (EELS) under exactly the same conditions. We also compare the double aperture acquisition mode with the qE acquisition mode which has been previously used for parallel acquisition of EMCD. We show that the double aperture mode not only offers better signal to noise ratio as compared to qE mode but also allows for much higher acquisition times to significantly improve the signal quality which is crucial for quantitative analysis of the magnetic moments.
|
|
| 4. |
- Ali, Hasan, 1985-, et al.
(författare)
-
Simultaneous mapping of EMCD signals and crystal orientations in a transmission electron microscope
- 2021
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- When magnetic properties are analysed in a transmission electron microscope using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation. Since small orientation changes can have a strong impact on the measurement of the EMCD signal and such measurements need two separate measurements of conjugate EELS spectra, it is experimentally non-trivial to measure the EMCD signal as a function of sample orientation. Here, we have developed a methodology to simultaneously map the quantitative EMCD signals and the local orientation of the crystal. We analyse, both experimentally and by simulations, how the measured magnetic signals evolve with a change in the crystal tilt. Based on this analysis, we establish an accurate relationship between the crystal orientations and the EMCD signals. Our results demonstrate that a small variation in crystal tilt can significantly alter the strength of the EMCD signal. From an optimisation of the crystal orientation, we obtain quantitative EMCD measurements.
|
|
| 5. |
- Ali, Hasan, 1985-, et al.
(författare)
-
Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture
- 2023
-
Ingår i: Ultramicroscopy. - : Elsevier BV. - 0304-3991 .- 1879-2723. ; 251
-
Tidskriftsartikel (refereegranskat)abstract
- The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while keeping all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.
|
|
| 6. |
|
|
| 7. |
- Bručas, Rimantas, et al.
(författare)
-
Magnetic and transport properties of Ni81Fe19/Al2O3 granular multilayers approaching the superparamagnetic limit
- 2007
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 101:7, s. 073907-
-
Tidskriftsartikel (refereegranskat)abstract
- The magnetic and transport properties of Ni81Fe 19/Al2O3 granular multilayer films were studied in relation to their structural properties as the nominal thickness t of the permalloy (Ni81Fe19) layer was varied near the percolation limit: in the range of 8≤t≤ 16 Å while keeping the nominal thickness of the Al2O3 layers constant at 16 Å. A good structural quality of the multilayers was demonstrated by low angle x-ray reflectivity measurements, and transmission electron microscopy showed the transition from continuous permalloy layers separated by aluminium oxide layers for t= 16 Å to metal grains dispersed in the insulator at t=8 Å. Magnetization measurements showed the gradual transition from ferromagnetic layers to superparamagnetic clusters and grains that successively become blocked as the temperature decreases. A strong correlation between transport and structural properties was observed in the temperature (T) dependence of the electrical resistance measured with the current in the plane in the range of 2 ≤T≤300 K: a gradual change of behavior from continuous permalloy layers with conducting interlayer connections for t=16 Å. to isolated permalloy grains in a dielectric for the film with t= 10 Å. The percolation occurs between 12 and 10 Å, as deduced both from the magnetic and resistive properties. The discontinuous metal films were analyzed within models for thermally assisted tunneling, yielding estimates of the tunneling barrier for intralayer conduction of about 20 meV for t= 10 Å. A significant magnetic field dependence of the resistance increasing with decreasing temperature was observed in all samples.
|
|
| 8. |
|
|
| 9. |
- Droulias, Sotirios A., et al.
(författare)
-
Crystal perfection by strain engineering : The case of Fe/V (001)
- 2017
-
Ingår i: Thin Solid Films. - : Elsevier BV. - 0040-6090 .- 1879-2731. ; 636, s. 608-614
-
Tidskriftsartikel (refereegranskat)abstract
- We study the effect of bilayer thickness at fixed volume fraction on the structural quality of Fe/V (001)superlattices. We find that such artificial metallic superlattices can be manufactured with excellent crystalquality and layering up to at least 50 Å in repeat distance (K = LFe +LV). For an intended fixed ratio of theconstituents: LFe/LV= 1/7, out-of-plane coherence lengths comparable to the thicknesses of the sampleswere obtained. We evaluate the strain in- and out-of-plane of both layers as a function of the bilayer thicknessand comment on the growth using the framework of linear elasticity theory. We interpret the stabilityof the superlattice against crystal degradation due to the alternating compressive and tensile strain, yieldingclose to ideal lattice matching to the substrate.
|
|
| 10. |
- Hase, Thomas, et al.
(författare)
-
Spin and orbital moment in amorphous Co68Fe24Zr8 layers
- 2009
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 80:13, s. 134402-
-
Tidskriftsartikel (refereegranskat)abstract
- The ratio of the orbital to the spin magnetic moment was determined for both Fe and Co in amorphous Co68 Fe24 Zr8 layers using x-ray circular dichroism. The investigations were performed on both thick Co68 Fe24 Zr8 layers as well as on amorphous Co68 Fe24 Zr8 / Al70 Zr30 multilayers grown by dc sputtering. Structural characterization was performed using x-ray reflectometry, x-ray diffraction, and transmission electron microscopy. X-ray circular dichroism, x-ray magnetic scattering as well as the magneto-optic Kerr effect were used to characterize the magnetic properties of the amorphous materials. The ratio of the orbital to spin moments in the single CoFeZr-layer sample was 0.012±0.005 for Fe and 0.078±0.005 for Co. Substantial reduction in the the ratio of the orbital to spin moments was observed with decreasing CoFeZr-layer thickness.
|
|
