| 1. |
- Allen, D.H., et al.
(författare)
-
Modeling the viscoelastic response of GMT structural components
- 2001
-
Ingår i: Composites Science And Technology. - 0266-3538 .- 1879-1050. ; 61:4, s. 503-515
-
Tidskriftsartikel (refereegranskat)abstract
- A glass-mat-reinforced thermoplastic (GMT) composite material has been fabricated from randomly oriented continuous glass fibers embedded in a polypropylene matrix. The mechanical constitution of this composite has been characterized by using a linear viscoelastic micromechanically based material model. This material model has subsequently been implemented to several finite-element computer codes for analysis of structural components fabricated from polypropylene GMT. In this paper several example problems have been studied in order to determine the applicability of this modeling approach to predicting time-dependent deformations due to creep in GMT components. These example problems have been solved by utilizing two commercially available codes: ABAQUS, and ANSYS. Furthermore, results obtained with the codes have been compared to both analytic and experimental results, with varying degrees of success. The paper details these results for each of the example problems considered herein. © 2001 Elsevier Science Ltd. All rights reserved.
|
|
| 2. |
- Holmberg, L. Joakim, 1971-
(författare)
-
Musculoskeletal Biomechanics in Cross-country Skiing
- 2012
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Why copy the best athletes? When you finally learn their technique, they may have already moved on. Using muscluloskeletal biomechanics you might be able to add the "know-why" so that you can lead, instead of being left in the swells.This dissertation presents the theoretical framework of musculoskeletal modeling using inverse dynamics with static optimization. It explores some of the possibilities and limitations of musculoskeletal biomechanics in cross-country skiing, especially double-poling. The basic path of the implementation is shown and discussed, e.g. the issue of muscle model choice. From that discussion it is concluded that muscle contraction dynamics is needed to estimate individual muscle function in double-poling. Several computer simulation models, using The Anybody Modeling System™, have been created to study different cross-country skiing applications. One of the applied studies showed that the musculoskeletal system is not a collection of discrete uncoupled parts because kinematic differences in the lower leg region caused kinetic differences in the other end of the body. An implication of the results is that the kinematics and kinetics of the whole body probably are important when studying skill and performance in sports. Another one of the applied studies showed how leg utilisation may affect skiing efficiency and performance in double-poling ergometry. Skiing efficiency was defined as skiing work divided by metabolic muscle work, performance was defined as forward impulse. A higher utilization of the lower-body increased the performance, but decreased the skiing efficiency. The results display the potential of musculoskeletal biomechanics for skiing efficiency estimations. The subject of muscle decomposition is also studied. It is shown both analytically and with numerical simulations that muscle force estimates may be affected by muscle decomposition depending on the muscle recruitment criteria. Moreover, it is shown that proper choices of force normalization factors may overcome this issue. Such factors are presented for two types of muscle recruitment criteria.To sum up, there are still much to do regarding both the theoretical aspects as well as the practical implementations before predictions on one individual skier can be made with any certainty. But hopefully, this disseration somewhat furthers the fundamental mechanistic understanding of cross-country skiing, and shows that musculoskeletal biomechanics will be a useful complement to existing experimental methods in sports biomechanics.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Suárez, A., et al.
(författare)
-
Surface integrity and fatigue of non-conventional machined Alloy 718
- 2019
-
Ingår i: Journal of Manufacturing Processes. - : Elsevier Ltd. - 1526-6125 .- 2212-4616. ; 48, s. 44-50
-
Tidskriftsartikel (refereegranskat)abstract
- Alloy 718 is a high-strength, corrosion-resistant nickel chromium-based superalloy frequently used for applications, such as aerospace, marine, nuclear reactor and chemical industries, due to its outstanding inherent properties such as high strength and corrosion resistance at high temperatures together with good creep behaviour. Although, the use of conventional manufacturing processes is prevalent for their use on Alloy 718, alternative manufacturing technologies are gaining importance. This work compares the effects of alternative manufacturing processes, such as Abrasive water jet (AWJ), Wire Electrical Discharge Machining (WEDM) and ultrasound vibration assisted milling (UVAM) with conventional milling during the manufacture of Alloy 718 parts. Surface integrity, hardness, residual stress and fatigue strength obtained from these machining processes have been examined for cutting alloy 718. Results show that both residual stresses and surface roughness are correlated with fatigue strength. UVAM results shown an improvement on the surface integrity of the final workpiece. AWJ and WEDM show poorer results, further work on post-process technologies or process condition selection must be carry out to establish them as an alternative in Alloy 718 cutting operations.
|
|
| 6. |
- Bridarolli, Alexandra, et al.
(författare)
-
Evaluation of the Adhesion and Performance of Natural Consolidants for Cotton Canvas Conservation
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society. - 1944-8244 .- 1944-8252. ; 10:39, s. 33652-33661
-
Tidskriftsartikel (refereegranskat)abstract
- Recent developments in paper and canvas conservation have seen the introduction of nanocellulose (NC) as a compatible treatment for the consolidation of historical cellulosic artifacts and manuscripts. However, as part of the assessment of these new materials for canvas consolidation, the adhesion of the consolidation treatment (which takes place between the applied material and the substrate) has not yet been evaluated, and as a result, it is poorly understood by both the scientific and conservation communities. After evaluating the potential of NC treatments for the consolidation of cotton painting canvas, we investigate a route to promote the interaction between the existing canvas and the nanocellulose treatment, which is in our case made of cellulose nanofibrils (CNF). This was carried out by introducing a cationic polymer, polyamidoamine-epichlorohydrin (PAAE), as an intermediate layer between the canvas and the CNF. The morphological, chemical, and mechanical evaluation of the canvas samples at different relative humidity (RH) levels demonstrated how the adhesion of the added PAAE layer is a dominant factor in the consolidation process. Improvement in the coating of canvas single fibers by the CNF, higher adhesion energy between the canvas fibers and the CNF treatment, and finally overall stronger canvas reinforcement were observed following the introduction of PAAE. However, an increase in mechanical response to moisture sorption and desorption was also observed for the PAAE-treated canvases. Overall, this study shows the complexity of such systems and, as such, the relevance of using a multiscale approach for their assessment.
|
|
| 7. |
- Holmberg, L. Joakim, 1971-, et al.
(författare)
-
Can Simulations Assist in Classification Development?
- 2013
-
Ingår i: Equipment and Technology in Paralympic Sports. - : International Paralympic Committee.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- There is a critical need for research that describes the extent to which impairments of varying type, severity and distribution impact performance in Paralympic sports. It is important with evidence-based judgment on how the impairments aect performance. In the following, we present a complementary evidence-based tool for classication.Let us start with an example. We recently presented a study (Holmberg et al., 2012)1 that utilized two full-body musculoskeletal simulation models of cross-country skiing (double-poling). The models were identical except that one carried no muscles in the right lower leg and foot; thus mimicking a lower leg prosthesis. It was hypothesized that a lower leg prosthesis would inuence muscular work throughout the whole body. Results showed that to generate the same motion and external work, an able-bodied skier only had to produce about 80% metabolic muscle work compared to a disabled skier (with a non-active right lower leg prosthesis).In reality there is always psychological factors present and it is probably not possible to nd two human beings (one fully functional and one impaired) with the same tness, size, strength and technique. Thus, it is hard to nd the unbiased eect of an impairment on performance in a speci c sport. The example above shows the strength of using simulations because a musculoskeletal model yields quantitative data on the unbiased eect of dierent functional impairments.In cross-country skiing, athletes with functional impairments are, in 'competition format' classification, assigned to dierent categories with weight factors. Athletes perform their race and the result list is presented as race time multiplied by weight factor. In the future, musculoskeletal simulations may assist in answering how a specic functional impairment aects performance and thereby improve the fairness in assigning weight factors for classication.
|
|
| 8. |
- Nechyporchuk, Oleksandr, et al.
(författare)
-
On the potential of using nanocellulose for consolidation of painting canvases
- 2018
-
Ingår i: Carbohydrate Polymers. - : Elsevier Ltd. - 0144-8617 .- 1879-1344. ; 194, s. 161-169
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocellulose has been recently proposed as a novel consolidant for historical papers. Its use for painting canvas consolidation, however, remains unexplored. Here, we show for the first time how different nanocelluloses, namely mechanically isolated cellulose nanofibrils (CNF), carboxymethylated cellulose nanofibrils (CCNF) and cellulose nanocrystals (CNC), act as a bio-based alternative to synthetic resins and other conventional canvas consolidants. Importantly, we demonstrate that compared to some traditional consolidants, all tested nanocelluloses provided reinforcement in the adequate elongation regime. CCNF showed the best consolidation per added weight; however, it had to be handled at very low solids content compared to other nanocelluloses, exposing canvases to larger water volumes. CNC reinforced the least per added weight but could be used in more concentrated suspensions, giving the strongest consolidation after an equivalent number of coatings. CNF performed between CNC and CCNF. All nanocelluloses showed better consolidation than lining with synthetic adhesive (Beva 371) and linen canvas in the elongation region of interest.
|
|
| 9. |
- Holmberg, Joakim L., 1971-
(författare)
-
Computational Biomechanics in Cross-country Skiing
- 2008
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Traditionally, research on cross‐country skiing biomechanics is based mainly on experimental testing alone. Trying a different approach, this thesis explores the possibilities of using computational musculoskeletal biomechanics for cross‐country skiing. As far as the author knows, this has not been done before.Cross‐country skiing is both fast and powerful, and the whole body is used to generate movement. Consequently, the computational method used needs to be able to handle a full‐body model with lots of muscles. This thesis presents several simulation models created in the AnyBody Modeling System, which is based on inverse dynamics and static optimization. This method allows for measurementdriven full‐body models with hundreds of muscles and rigid body segments of all major body parts.A major result shown in the thesis is that with a good simulation model it is possible to predict muscle activation. Even though there is no claim of full validity of the simulation models, this result opens up a wide range of possibilities for computational musculoskeletal biomechanics in cross‐country skiing. Two example of new possibilities are shown in the thesis, finding antagonistic muscle pairs and muscle load distribution differences in different skiing styles. Being able to perform optimization studies and asking and answering “what if”‐questions really gives computational methods an edge compared to traditional testing.To conclude, a combination of computational and experimental methods seems to be the next logical step to increase the understanding of the biomechanics of crosscountry skiing.
|
|
| 10. |
|
|
