| 1. |
- Asplund, Maria, 1978-, et al.
(författare)
-
Biocompatibility of PEDOT/biomolecular composites intended for neural communication electrodes
-
Annan publikation (populärvet., debatt m.m.)abstract
- Electrodes of the conjugated polymer poly(3,4-ethylene dioxythiophene) (PEDOT) have been shown to possess very attractive electrochemical properties for functional electrical stimulation (FES) or recording in the nervous system. Biomolecules already present in nervous tissue, added as counter ions in PEDOT electropolymerisation, could be a route to further improve the biomaterial properties of PEDOT, eliminating the need of surfactant counter ions like docedyl benzene sulphonate (DBS) or polystyrene sulphonate (PSS) in the polymerisation process. Such PEDOT/biomolecular composites using heparin, or hyaluronic acid, have been electrochemically investigated in a previous study and have been shown to retain the attractive electrochemical properties already proven for PEDOT:PSS. The aim of the present study is to evaluate biocompatibility of these PEDOT/biomolecular composites in vitro and also evaluate PEDOT:heparin biocompatibility in cortical tissue in vivo. Hereby, we also aim to identify a suitable test protocol, that can be used in future evaluations when further material developments are made. Material toxicity was first tested on cell lines, both through a standardised agarose overlay assay on L929 fibroblasts, and through elution tests on human neuroblastoma SH-SY5Y cells. Subsequently, a biocompatibility in vivo test was performed using PEDOT:heparin coated platinum probes implanted in the cerebral cortex of Sprague-Dawley rats. Tissue was collected at three weeks and six weeks of implantation and evaluated by immunohistochemistry. No cytotoxic response was seen to any of the PEDOT:biomolecular composites tested here. Furthermore, elution tests were found to be a practical and effective way of screening materials for toxicity and had a clear advantage over the agarose overlay assay, which was difficult to apply on other cell types than fibroblasts. Elution tests would therefore be recommendable as a screening method, at all stages of material development. In the in vivo tests, the stiffness of the platinum substrate was a significant problem, and extensive glial scarring was seen in most cases irrespective of implant material. However, quantification of immunological response through distance measurements from implant site to closest neuron, and counting of macrophage densities in proximity to polymer surface, was comparable to those of platinum controls. These results indicate that PEDOT:heparin surfaces were as compatible with cortical tissue as pure platinum controls.
|
|
| 2. |
- Asplund, Maria, 1978-, et al.
(författare)
-
Composite biomolecule/PEDOT materials for neural electrodes
- 2008
-
Ingår i: Biointerphases. - NY : American Institute of Physics. - 1559-4106 .- 1934-8630. ; 3:3, s. 83-93
-
Tidskriftsartikel (refereegranskat)abstract
- Electrodes intended for neural communication must be designed to meet boththe electrochemical and biological requirements essential for long term functionality. Metallic electrode materials have been found inadequate to meet theserequirements and therefore conducting polymers for neural electrodes have emergedas a field of interest. One clear advantage with polymerelectrodes is the possibility to tailor the material to haveoptimal biomechanical and chemical properties for certain applications. To identifyand evaluate new materials for neural communication electrodes, three chargedbiomolecules, fibrinogen, hyaluronic acid (HA), and heparin are used ascounterions in the electrochemical polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT). The resultingmaterial is evaluated electrochemically and the amount of exposed biomoleculeon the surface is quantified. PEDOT:biomolecule surfaces are also studiedwith static contact angle measurements as well as scanning electronmicroscopy and compared to surfaces of PEDOT electrochemically deposited withsurfactant counterion polystyrene sulphonate (PSS). Electrochemical measurements show that PEDOT:heparinand PEDOT:HA, both have the electrochemical properties required for neuralelectrodes, and PEDOT:heparin also compares well to PEDOT:PSS. PEDOT:fibrinogen isfound less suitable as neural electrode material.
|
|
| 3. |
- Asplund, Maria, 1978-
(författare)
-
Conjugated Polymers for Neural Interfaces : Prospects, possibilities and future challenges
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Within the field of neuroprosthetics the possibility to use implanted electrodes for communication with the nervous system is explored. Much effort is put into the material aspects of the electrode implant to increase charge injection capacity, suppress foreign body response and build micro sized electrode arrays allowing close contact with neurons. Conducting polymers, in particular poly(3,4-ethylene dioxythiophene) (PEDOT), have been suggested as materials highly interesting for such neural communication electrodes. The possibility to tailor the material both mechanically and biochemically to suit specific applications, is a substantial benefit with polymers when compared to metals. PEDOT also have hybrid charge transfer properties, including both electronic and ionic conduction, which allow for highly efficient charge injection. Part of this thesis describes a method of tailoring PEDOT through exchanging the counter ion used in electropolymerisation process. Commonly used surfactants can thereby be excluded and instead, different biomolecules can be incorporated into the polymer. The electrochemical characteristics of the polymer film depend on the ion. PEDOT electropolymerised with heparin was here determined to have the most advantageous properties. In vitro methods were applied to confirm non-cytotoxicity of the formed PEDOT:biomolecular composites. In addition, biocompatibility was affirmed for PEDOT:heparin by evaluation of inflammatory response and neuron density when implanted in rodent cortex. One advantage with PEDOT often stated, is its high stability compared to other conducting polymers. A battery of tests simulating the biological environment was therefore applied to investigate this stability, and especially the influence of the incorporated heparin. These tests showed that there was a decline in the electroactivity of PEDOT over time. This also applied in phosphate buffered saline at body temperature and in the absence of other stressors. The time course of degradation also differed depending on whether the counter ion was the surfactant polystyrene sulphonate or heparin, with a slightly better stability for the former. One possibility with PEDOT, often overlooked for biological applications, is the use of its semi conducting properties in order to include logic functions in the implant. This thesis presents the concept of using PEDOT electrochemical transistors to construct textile electrode arrays with in-built multiplexing. Using the electrolyte mediated interaction between adjacent PEDOT coated fibres to switch the polymer coat between conducting and non conducting states, then transistor function can be included in the conducting textile. Analogue circuit simulations based on experimentally found transistor characteristics proved the feasibility of these textile arrays. Developments of better polymer coatings, electrolytes and encapsulation techniques for this technology, were also identified to be essential steps in order to make these devices truly useful. In summary, this work shows the potential of PEDOT to improve neural interfaces in several ways. Some weaknesses of the polymer and the polymer electronics are presented and this, together with the epidemiological data, should point in the direction for future studies within this field.
|
|
| 4. |
- Asplund, Maria, et al.
(författare)
-
Construction of wire electrodesand 3D woven logicas a potential technology forneuroprosthetic implants
- 2008
-
Ingår i: IEEE Transactions on Biomedical Engineering. - 0018-9294 .- 1558-2531.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- New strategies to improve neuron coupling to neuroelectronic implants are needed. In particular, tomaintain functional coupling between implant and neurons, foreign body response like encapsulation must meminimized. Apart from modifying materials to mitigate encapsulation it has been shown that with extremely thinstructures, encapsulation will be less pronounced. We here utilize wire electrochemical transistors (WECTs) usingconducting polymer coated fibers. Monofilaments down to 10 μm can be successfully coated and weaved intocomplex networks with built in logic functions, so called textile logic. Such systems can control signal patterns at alarge number of electrode terminals from a few addressing fibres. Not only is fibre size in the range where lessencapsulation is expected but textiles are known to make successful implants because of their soft and flexiblemechanical properties. Further, textile fabrication provides versatility and even three dimensional networks arepossible. Three possible architectures for neuroelectronic systems are discussed. WECTs are sensitive to dehydrationand materials for better durability or improved encapsulation is needed for stable performance in biologicalenvironments.
|
|
| 5. |
|
|
| 6. |
- Asplund, M, et al.
(författare)
-
Toxicity evaluation of PEDOT/biomolecular composites intended for neural communication electrodes
- 2009
-
Ingår i: BIOMEDICAL MATERIALS. - : IOP Publishing. - 1748-6041 .- 1748-605X. ; 4:4, s. 045009-
-
Tidskriftsartikel (refereegranskat)abstract
- Electrodes coated with the conducting polymer poly(3,4-ethylene dioxythiophene) (PEDOT) possess attractive electrochemical properties for stimulation or recording in the nervous system. Biomolecules, added as counter ions in electropolymerization, could further improve the biomaterial properties, eliminating the need for surfactant counter ions in the process. Such PEDOT/biomolecular composites, using heparin or hyaluronic acid, have previously been investigated electrochemically. In the present study, their biocompatibility is evaluated. An agarose overlay assay using L929 fibroblasts, and elution and direct contact tests on human neuroblastoma SH-SY5Y cells are applied to investigate cytotoxicity in vitro. PEDOT: heparin was further evaluated in vivo through polymer-coated implants in rodent cortex. No cytotoxic response was seen to any of the PEDOT materials tested. The examination of cortical tissue exposed to polymer-coated implants showed extensive glial scarring irrespective of implant material (Pt:polymer or Pt). However, quantification of immunological response, through distance measurements from implant site to closest neuron and counting of ED1+ cell density around implant, was comparable to those of platinum controls. These results indicate that PEDOT: heparin surfaces were non-cytotoxic and show no marked difference in immunological response in cortical tissue compared to pure platinum controls.
|
|
| 7. |
- Asplund, Maria, 1978-, et al.
(författare)
-
Wire electronics and woven logic, as a potential technology for neuroelectronic implants
-
Annan publikation (populärvet., debatt m.m.)abstract
- New strategies to improve neuron coupling to neuroelectronic implants are needed. In particular, to maintain functional coupling between implant and neurons, foreign body response like encapsulation must me minimized. Apart from modifying materials to mitigate encapsulation it has been shown that with extremely thin structures, encapsulation will be less pronounced. We here utilize wire electrochemical transistors (WECTs) using conducting polymer coated fibers. Monofilaments down to 10 μm can be successfully coated and weaved into complex networks with built in logic functions, so called textile logic. Such systems can control signal patterns at a large number of electrode terminals from a few addressing fibres. Not only is fibre size in the range where less encapsulation is expected but textiles are known to make successful implants because of their soft and flexible mechanical properties. Further, textile fabrication provides versatility and even three dimensional networks are possible. Three possible architectures for neuroelectronic systems are discussed. WECTs are sensitive to dehydration and materials for better durability or improved encapsulation is needed for stable performance in biological environments.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Thaning, Elin M., et al.
(författare)
-
Stability of Poly(3,4-ethylene dioxythiophene) Materials Intended for Implants
- 2010
-
Ingår i: Journal of Biomedical Materials Research - Part B Applied Biomaterials. - : Wiley. - 1552-4973 .- 1552-4981. ; 93B:2, s. 407-415
-
Tidskriftsartikel (refereegranskat)abstract
- This study presents experiments designed to study the stability of the conducting polymer poly(3,4-ethylene dioxythiophene) (PEDOT), under simulated physiological conditions using phosphate-buffered saline (PBS) and hydrogen peroxide (H2O2) (0 01M) at 37 degrees C over a 5- to 6-week period Voltage pulsing in PBS was used as an additional test environment The influence of switching the counter ion used in electropolymerization from polystyrene sulphonate (PSS) to heparin was investigated Absorbance spectroscopy and cyclic voltammetry were used to evaluate the material properties Most of the samples in H2O2 lost both electroactivity and optical absorbance within the study period, but PEDOT.PSS was found slightly more stable than PEDOT heparin. Polymers were relatively stable in PBS throughout the study period, with around 80% of electroactivity remaining after 5 weeks, disregarding delamination, which was a significant problem especially for polymer on indium tin oxide substrates Voltage pulsing in PBS did not increase degradation. The counter ion influenced the time course of degradation in Oxidizing agents.
|
|
