| 1. |
- Aamodt, K., et al.
(author)
-
Alignment of the ALICE Inner Tracking System with cosmic-ray tracks
- 2010
-
In: Journal of Instrumentation. - 1748-0221. ; 5
-
Conference paper (peer-reviewed)abstract
- ALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 mu m in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10(5) charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.
|
|
| 2. |
- Zhang, S. N., et al.
(author)
-
The high energy cosmic-radiation detection (HERD) facility onboard China's Space Station
- 2014
-
In: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 9780819496126
-
Conference paper (peer-reviewed)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads of the cosmic lighthouse program onboard China's Space Station, which is planned for operation starting around 2020 for about 10 years. The main scientific objectives of HERD are indirect dark matter search, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 104 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of seven X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side SKTs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV, 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R and D is under way for reading out the LYSO signals with optical fiber coupled to image intensified CCD and the prototype of one layer of CALO.
|
|
| 3. |
- Zhang, S. -N, et al.
(author)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
In: Proceedings of Science. - : Sissa Medialab Srl.
-
Conference paper (peer-reviewed)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 4. |
- Kristan, Matej, et al.
(author)
-
The Visual Object Tracking VOT2017 challenge results
- 2017
-
In: 2017 IEEE INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2017). - : IEEE. - 9781538610343 ; , s. 1949-1972
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge VOT2017 is the fifth annual tracker benchmarking activity organized by the VOT initiative. Results of 51 trackers are presented; many are state-of-the-art published at major computer vision conferences or journals in recent years. The evaluation included the standard VOT and other popular methodologies and a new "real-time" experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The VOT2017 goes beyond its predecessors by (i) improving the VOT public dataset and introducing a separate VOT2017 sequestered dataset, (ii) introducing a realtime tracking experiment and (iii) releasing a redesigned toolkit that supports complex experiments. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 5. |
- Tångring, Ivar, 1978, et al.
(author)
-
Molecular beam epitaxy growth of A 1.58 μm InGaAs quantum well laser on GaAs
- 2008
-
In: Conference Proceedings - International Conference on Indium Phosphide and Related Materials. - 1092-8669. - 9781424422593
-
Conference paper (peer-reviewed)abstract
- We demonstrate how MBE growth parameters can be optimized to produce a metamorphic InGaAs QW laser emitting in the 1.55 ?m range. Different techniques to suppress roughening while maintaining low threading dislocation densities are evaluated. Finally, we demonstrate a 50×1250 ?m 2 broad area FabryPerot laser that produces pulsed lasing with a threshold current density of 490 A/cm2 and a wavelength of 1.58 ?m at room temperature.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Borge, M. J. G., et al.
(author)
-
Beta-delayed multiparticle emission studies at ISOL-type facilities
- 2004
-
In: Nuclear Physics A. - : Elsevier BV. - 0375-9474. ; 746, s. 243-243
-
Conference paper (peer-reviewed)abstract
- We report here on the recent beta-decay studies made at ISOL-type Facilities to determine the multiparticle breakup mechanism of excited states in light nuclei by studying them in full kinematics. In particular the results obtained for the A = 9 isobars and the breakup of the 12.7 MeV state in C-12 of unnatural parity are discussed. The breakup of the latter has been debated since more than a decade. Mirror beta transitions in the A = 9 chain are compared and a large asymmetry factor is deduced for the transitions to high excitation energy in Be-9 (11.8 MeV) and B-9 (12.2 MeV) fed in the beta-decay of Li-9 and C-9 respectively. It is shown that the asymmetry is not due to experimental problems or differences in the mechanisms of breakup or in the spin of the states. As no asymmetry is found in the gs to gs transition it must be due to the particular structure of these excited states. The controversy on the breakup mechanism of the 12.7 MeV state is resolved.
|
|
| 9. |
- Farserotu, J., et al.
(author)
-
Tactile prosthetics in WiseSkin
- 2015
-
In: Proceedings of the 2015 Design, Automation and Test in Europe Conference and Exhibition, DATE 2015. - 9783981537048 ; 2015-April, s. 1695-1697
-
Conference paper (peer-reviewed)abstract
- The use of prosthetic hands is limited in part by the lack of sensory feedback to the wearer. In order to provide sensory feedback, an adequate number of sensors must be integrated with the prosthesis. The WiseSkin project targets the use of artificial skin embedding ultra-low power wireless sensor nodes. This presentation provides an overview of the WiseSkin project and the current status of the developments.
|
|
| 10. |
- Frischknecht, R., et al.
(author)
-
Comparison of the environmental assessment of an identical office building with national methods
- 2019
-
In: IOP Conference Series: Earth and Environmental Science. - : IOP Publishing. - 1755-1307 .- 1755-1315. ; , s. 012037-
-
Conference paper (peer-reviewed)abstract
- The IEA EBC Annex 72 focuses on the assessment of the primary energy demand, greenhouse gas emissions and environmental impacts of buildings during production, construction, use (including repair and replacement) and end of life (dismantling), i.e. during the entire life cycle of buildings. In one of its activities, reference buildings (size, materialisation, operational energy demand, etc.) were defined on which the existing national assessment methods are applied using national (if available) databases and (national/regional) approaches. The "be2226" office building in Lustenau, Austria was selected as one of the reference buildings. TU Graz established a BIM model and quantified the amount of building elements as well as construction materials required and the operational energy demand. The building assessment was carried out using the same material and energy demand but applying the LCA approach used in the different countries represented by the participating Annex experts. The results of these assessments are compared in view of identifying major discrepancies. Preliminary findings show that the greenhouse gas emissions per kg of building material differ up to a factor of two and more. Major differences in the building assessments are observed in the transports to the construction site (imports) and the construction activities as well as in the greenhouse gas emissions of the operational energy demand (electricity). The experts document their practical difficulties and how they overcame them. The results of this activity are used to better target harmonisation efforts.
|
|
