| 1. |
- Nilsson, Helena, et al.
(författare)
-
Compression molded wood pulp biocomposites : A study of hemicellulose influence on cellulose supramolecular structure and material properties
- 2012
-
Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 19:3, s. 751-760
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the importance of hemicellulose content and structure in chemical pulps on the property relationships in compression molded wood pulp biocomposites is examined. Three different softwood pulps are compared; an acid sulfite dissolving grade pulp with high cellulose purity, an acid sulfite paper grade pulp and a paper grade kraft pulp, the latter two both containing higher amounts of hemicelluloses. Biocomposites based the acid sulfite pulps exhibit twice as high Young's modulus as the composite based on paper grade kraft pulp, 11-12 and 6 GPa, respectively, and the explanation is most likely the difference in beating response of the pulps. Also the water retention value (WRV) is similarly low for the two molded sulfite pulps (0.5 g/g) as compared to the molded kraft pulp (0.9 g/g). The carbohydrate composition is determined by neutral sugar analysis and average molar masses by SEC. The cellulose supramolecular structure (cellulose fibril aggregation) is studied by solid state CP/MAS 13C-NMR and two forms of hemicellulose are assigned. During compression molding, cellulose fibril aggregation occurs to higher extent in the acid sulfite pulps as compared to the kraft pulp. In conclusion, the most important observation from this study is that the difference in hemicellulose content and structure seems to affect the aggregation behaviour and WRV of the investigated biocomposites.
|
|
| 2. |
- Wickholm, K., et al.
(författare)
-
Quantification of cellulose forms in complex cellulose materials : A chemometric model
- 2001
-
Ingår i: Cellulose. - Stockholm : Kluwer Academic Publishers. - 0969-0239 .- 1572-882X. ; 8:2, s. 139-148
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we present a chemometric model for quantifying the cellulose forms with different states of order found within cellulose I fibrils. The relative amounts of the different cellulose forms, that is crystalline cellulose I, para-crystalline cellulose and cellulose at accessible and inaccessible cellulose surfaces, were determined by non-linear least squares fitting of the C4-region in CP/MAS C-13-NMR (Cross-Polarisation Magic Angle Spinning Carbon-13 Nuclear Magnetic Resonance) spectra. By correlating these results from the C4-region with the full spectral data we obtained a model which is able to provide an assessment of the relative amounts of the different cellulose forms directly from NMR-spectra of complex lignocellulosic samples. Furthermore, this model enabled new assignments to be made in the C1-region for signals from cellulose at accessible fibril surfaces.
|
|
| 3. |
- Nilsson, Helena, et al.
(författare)
-
A non-solvent approach for high-stiffness all-cellulose biocomposites based on pure wood cellulose
- 2010
-
Ingår i: Composites Science And Technology. - : Elsevier BV. - 0266-3538 .- 1879-1050. ; 70:12, s. 1704-1712
-
Tidskriftsartikel (refereegranskat)abstract
- All-cellulose composites are commonly prepared using cellulose solvents. In this study, moldable all-cellulose I wood fiber materials of high cellulose purity (97%) were successfully compression molded. Water is the only processing aid. The material is interesting as a "green" biocomposite for industrial applications. Dissolving wood fiber pulps (Eucalyptus hardwood and conifer softwood) are used and the influence of pulp origin, beating and pressing temperature (20-180 degrees C) on supramolecular cellulose nanostructure is studied by solid state CP/MAS C-13 NMR. Average molar mass is determined by SEC to assess process degradation effects. Mechanical properties are determined in tensile tests. High-density composites were obtained with a Young's modulus of up to 13 GPa. In addition, nanoscale cellulose fibril aggregation was confirmed due to processing, and resulted in a less moisture sensitive material.
|
|
