| 1. |
- Birney, Ewan, et al.
(author)
-
Identification and analysis of functional elements in 1% of the human genome by the ENCODE pilot project
- 2007
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 447:7146, s. 799-816
-
Journal article (peer-reviewed)abstract
- We report the generation and analysis of functional data from multiple, diverse experiments performed on a targeted 1% of the human genome as part of the pilot phase of the ENCODE Project. These data have been further integrated and augmented by a number of evolutionary and computational analyses. Together, our results advance the collective knowledge about human genome function in several major areas. First, our studies provide convincing evidence that the genome is pervasively transcribed, such that the majority of its bases can be found in primary transcripts, including non-protein-coding transcripts, and those that extensively overlap one another. Second, systematic examination of transcriptional regulation has yielded new understanding about transcription start sites, including their relationship to specific regulatory sequences and features of chromatin accessibility and histone modification. Third, a more sophisticated view of chromatin structure has emerged, including its inter-relationship with DNA replication and transcriptional regulation. Finally, integration of these new sources of information, in particular with respect to mammalian evolution based on inter- and intra-species sequence comparisons, has yielded new mechanistic and evolutionary insights concerning the functional landscape of the human genome. Together, these studies are defining a path for pursuit of a more comprehensive characterization of human genome function.
|
|
| 2. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
- Schael, S, et al.
(author)
-
Precision electroweak measurements on the Z resonance
- 2006
-
In: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Research review (peer-reviewed)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Abel, I, et al.
(author)
-
Overview of the JET results with the ITER-like wall
- 2013
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Journal article (peer-reviewed)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 5. |
- Cahill, Paul, et al.
(author)
-
Energy Harvesting from Train-Induced Response in Bridges
- 2014
-
In: Journal of Bridge Engineering. - 1084-0702 .- 1943-5592. ; 19:9, s. 04014034-
-
Journal article (peer-reviewed)abstract
- The integration of large infrastructure with energy-harvesting systems is a growing field with potentially new and important applications. The possibility of energy harvesting from ambient vibration of bridges is a new field in this regard. This paper investigates the feasibility of energy harvesting for a number of trains considering their passage over a bridge. The power that can be derived from an energy-harvesting device due to a train crossing a bridge at different speeds is compared against typical demands of small wireless devices and is found to be adequate for powering such devices. These estimates of harvested energy also relate to the individual signatures of trains. In this work, the modeled dynamic responses of a bridge traversed by trains are compared against full-scale experimental analysis of train-bridge interactions. A potential application in structural health monitoring (SHM) using energy harvesting has also been demonstrated and compared with laboratory experimental data. Consistent and monotonic damage calibration curves have been constructed using estimated harvested energy.
|
|
| 6. |
- Costanza, Robert, et al.
(author)
-
Developing an Integrated History and future of People on Earth (IHOPE)
- 2012
-
In: Current Opinion in Environmental Sustainability. - : Elsevier BV. - 1877-3435 .- 1877-3443. ; 4:1, s. 106-114
-
Journal article (peer-reviewed)abstract
- The Integrated History and future of People on Earth (IHOPE) initiative is a global network of researchers and research projects with its International Program Office (IPO) now based at the Stockholm Resilience Center (SRC), Uppsala University, Arizona State University, Portland State University, and the Australian National University. Research linked to IHOPE demonstrates that Earth system changes in the past have been strongly associated with changes in the coupled human-environment system. IHOPE supports integrating knowledge and resources from the biophysical and the social sciences and the humanities to address analytical and interpretive issues associated with coupled human-earth system dynamics. This integration of human history and Earth system history is a timely and important task. Until recently, however, there have been few attempts at such integration. IHOPE will create frameworks that can be used to help achieve this integration. The overarching goal is to produce a rich understanding of the relationships between environmental and human processes over the past millennia. HOPE recognizes that one major challenge for reaching this goal is developing 'workable' terminology that can be accepted by scholars of all disciplines. The specific objectives for IHOPE are to identify slow and rapidly moving features of complex social-ecological systems, on local to continental spatial scales, which induce resilience, stress, or collapse in linked systems of humans in nature. These objectives will be reached by exploring innovative ways of conducting interdisciplinary and transdisciplinary science, including theory, case studies, and integrated modeling. Examples of projects underway to implement this initiative are briefly discussed.
|
|
| 7. |
- Romanelli, F, et al.
(author)
-
Overview of the JET results
- 2011
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Journal article (peer-reviewed)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 8. |
- Sörlin, Sverker, et al.
(author)
-
Toward an Integrated History to Guide the Future
- 2011
-
In: Ecology and Society. - 1708-3087. ; 16:4
-
Journal article (peer-reviewed)abstract
- Many contemporary societal challenges manifest themselves in the domain of human–environment interactions.There is a growing recognition that responses to these challenges formulated within current disciplinary boundaries, in isolationfrom their wider contexts, cannot adequately address them. Here, we outline the need for an integrated, transdisciplinary synthesisthat allows for a holistic approach, and, above all, a much longer time perspective. We outline both the need for and thefundamental characteristics of what we call “integrated history.” This approach promises to yield new understandings of therelationship between the past, present, and possible futures of our integrated human–environment system. We recommend aunique new focus of our historical efforts on the future, rather than the past, concentrated on learning about future possibilitiesfrom history. A growing worldwide community of transdisciplinary scholars is forming around building this Integrated Historyand future of People on Earth (IHOPE). Building integrated models of past human societies and their interactions with theirenvironments yields new insights into those interactions and can help to create a more sustainable and desirable future. Theactivity has become a major focus within the global change community.
|
|
