| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
|
|
| 3. |
- Cao, Wei, et al.
(författare)
-
Self-Assembly of Large Magnetic Nanoparticles in Ultrahigh Molecular Weight Linear Diblock Copolymer Films
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:6, s. 7557-7564
-
Tidskriftsartikel (refereegranskat)abstract
- The development of diblock copolymer (DBC) nanocomposite films containing magnetic nanoparticles (NPs) with diameters (D) over 20 nm is a challenging task. To host large iron oxide NPs (Fe3O4, D = 27 +/- 0.6 nm), an ultrahigh molecular weight (UHMW) linear DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is used as a template in the present work. Due to hydrogen bonding between the carboxylic acid ligands of the NPs and the ester groups in PMMA, the NPs show an affinity to the PMMA block. The localization of the NPs inside the DBC is investigated as a function of the NP concentration. At low NP concentrations, NPs are located preferentially at the interface between PS and PMMA domains to minimize the interfacial tension caused by the strong segregation strength of the UHMW DBC. At high NP concentrations (>= 10 wt %), chain-like NP aggregates (a head-to-tail orientation) are observed in the PMMA domains, resulting in a change of the morphology from sphere to ellipsoid for part of the PMMA domains. Magnetic properties of the hybrid films are probed via superconducting quantum interference device magnetometry. All hybrid films show ferrimagnetism and are promising for potential applications in magnetic data storage.
|
|
| 4. |
- Cheng, Yirui, et al.
(författare)
-
Comparison of serum exosome isolation methods on co-precipitated free microRNAs.
- 2020
-
Ingår i: PeerJ. - : PeerJ. - 2167-8359. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Exosomes are nano-sized extracellular vesicles containing different biomolecules such as proteins and microRNAs (miRNAs) that mediate intercellular communication. Recently, numerous studies have reported the important functions of exosomal miRNAs in disease development and the potential clinical application as diagnostic biomarkers. Up to now, the most commonly used methods to extract exosomes are ultracentrifugation (UC) and precipitation-based commercial kit (e.g., ExoQuick). Generally, both UC and ExoQuick method could co-isolate contaminating proteins along with exosomes, with the UC method yielding even purer exosomes than ExoQuick. However, the comparison of these two methods on co-precipitated free miRNAs is still unknown.Methods: In this study, we isolated exosomes from the human serum with exogenously added cel-miR-39 by UC and ExoQuick and compared the proportion of cel-miR-39 co-precipitated with exosomes extracted by these two methods.Results: Using exogenous cel-miR-39 as free miRNAs in serum, we concluded that ExoQuick co-isolates a small proportion of free miRNAs while UC hardly precipitates any free miRNAs. We also found that incubation at 37 °C for 1 h could decrease the proportion of free miRNAs, and exosomal miRNAs like miR-126 and miR-152 also decreased when RNase A was used. In conclusion, our findings provide essential information about the details of serum exosome isolation methods for further research on exosomal miRNAs.
|
|
| 5. |
- Gao, Yan, et al.
(författare)
-
Synthesis and photophysical and electrochemical properties of a binuclear Ru(bpy)(3)-Cu(III) corrole complex
- 2007
-
Ingår i: Journal of Porphyrins and Phthalocyanines. - 1088-4246 .- 1099-1409. ; 11:06-maj, s. 463-469
-
Tidskriftsartikel (refereegranskat)abstract
- A novel binuclear Ru-Cu complex, composed of a copper(III)-corrole and a ruthenium(II) tris(bipyridine) moicty linked by an amide bond, has been synthesized and characterized by H-1 NMR, UV-vis and mass spectrometry. The steady-state emission and the electrochemical properties were investigated. Compared to the parent [Ru(bpy)(3)](2+), the emission-of the desired complex was substantially quenched when the MLCT of [Ru(bpy)(3)](2+) was selectively photoexcited.
|
|
| 6. |
- Jiang, Cong, et al.
(författare)
-
F-doped LiNi0.8Co0.15Al0.05O2-? : cathodes with enhanced ORR catalytic activity for LT-SOFCs
- 2023
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 940
-
Tidskriftsartikel (refereegranskat)abstract
- Developing highly effective catalysts for oxygen reduction reaction (ORR) is crucial to enable the low-temperature operation of solid oxide fuel cells (SOFCs). Recent studies have proposed a promising O2-/H+/e- conducting oxide, LiNi0.8Co0.15Al0.05O2-delta (LNCA) with good ORR catalytic activity for SOFC cathode uses. Herein, to further optimize the cathode functionality of LNCA, a fluorine anion (F-) doping strategy is ap-plied to develop highly active LNCAF0.1 and LNCAF0.2 cathodes for Sm-doped ceria (SDC) electrolyte-based SOFCs. It is found the successful doping of F- in the oxygen site of LNCA leads to improved oxygen ionic conductivity and facilitated surface exchange and bulk diffusion of oxygen in LNCAF0.1 and LNCAF0.2, which thus gain distinctly promoted ORR catalytic activity at 450-550 degrees C, as confirmed by the decreased area specific resistances (ASR) and activation energy on symmetrical cells. The as-fabricated two SDC-based SOFCs with LNCAF0.1 and LNCAF0.2 cathodes exhibit peak power densities of 497 and 591 mW cm-2 at 550 degrees C, respectively, which are higher than that of the cell with LNCA cathode. Furthermore, the single cell with the best-performing LNCAF0.2 cathode demonstrates a good stability for 110 h at 550 degrees C. The present study thus provides a feasible strategy of F anion doping to promote the ORR catalytic activity of LNCA cathode for developing low-temperature SOFCs.
|
|
| 7. |
- Liu, Yi, et al.
(författare)
-
Self-Assembly at a Macroscale Using Aerodynamics
- 2022
-
Ingår i: Applied Sciences. - : MDPI AG. - 2076-3417. ; 12:15, s. 7676-7676
-
Tidskriftsartikel (refereegranskat)abstract
- Intuitive self-assembly devices are of great significance to the emerging applications of self-assembly theory. In this paper, a novel intuitive device with an aerodynamic system is fabricated for the self-assembly experiment. Table tennis balls were used as the objects to be assembled during the self-assembly process. To understand more about the system, two experiments were designed—the directed assembly experiment was conducted to organize a specific structure and to explore the influences of environmental variables, and the indirect assembly experiment repeated with the “bottom-up” self-organization process and expressed the characteristics of “the optimization” and “the emergence” in the self-organization process. This article expressed a novel self-assembly approach at a macroscale and created a new choice or idea for the structural design and the optimization method.
|
|
| 8. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 9. |
- Shao, Cairu, et al.
(författare)
-
Influence of Cr doping on the oxygen evolution potential of SnO2/Ti and Sb-SnO2/Ti electrodes
- 2019
-
Ingår i: JOURNAL OF ELECTROANALYTICAL CHEMISTRY. - : ELSEVIER SCIENCE SA. - 1572-6657. ; 832, s. 436-443
-
Tidskriftsartikel (refereegranskat)abstract
- Oxygen evolution potential is the determining factor affecting the anode efficiency of the wastewater treatment process. In this study, we focus on increasing oxygen evolution potential of Cr-SnO2/Ti and Cr-Sb-SnO2/Ti electrodes with the pyrolytic method. XRD, SEM and XPS techniques had been applied to characterize the microstructures and chemical compositions of the samples. Electrochemical measurements had been performed to evaluate the oxygen evolution potential as a criterion of the wastewater treatment efficiency. The results show that co-doping of Sb and Cr improved the crystallinity and grain size of SnO2 coating, and Cr existed in the form of Cr(III) valence states. The Cr doping treatment improved the electronic conductivity and the electrocatalytic activity of the electrodes. DFT calculation of the band-structure indicates Cr doped SnO2 had a superior electrical conductivity, where Cr atom acts as an acceptor providing vacancies for electron transportation. The DOS diagrams reveal the Cr doped SnO2 showing a p-type conductivity which would subsequently influence the built-in potential on metal-semiconductor interface. We proposed the mechanism of the increase of oxygen evolution potential is the doping of Cr expands the built-in potential.
|
|
| 10. |
- Wang, Kui, et al.
(författare)
-
Efficient electro-demulsification of O/W emulsions and simultaneous oil removal enabled by a multiscale porous biocarbon electrode
- 2024
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 481
-
Tidskriftsartikel (refereegranskat)abstract
- Emulsion wastewater contain substantial amounts of oil and various additives, which pose threats to the environment and human health. Demulsification is a crucial pretreatment stage for wastewater. This study aims to identify a novel electro-demulsification method with high oil removal efficiency and low energy consumption. Modified carbonized birch wood with a unique isotropic multiscale pore structure is used as a self-standing electrode to treat a toluene oil-in-water (O/W) emulsion. The electrode must have a highly porous structure to facilitate efficient water diffusion and oil adsorption. It must also have high electronic conductivity to expedite polarized molecular electrophoresis to realize penetration into the pores and, subsequently, demulsification. Guided by an applied electric field force, polarized O/W droplets are drawn toward the electrode, revealing electrical characteristics distinct from those of polarized organic molecules. This electric field force augments the capture and adhesion of droplets by the electric double layer at the electrode interface. Consequently, adsorbed droplets in close proximity to the electrode rupture due to the combined influence of the electric field force and the electrostatic effects stemming from the electrode's multiscale porous structure. This synergistic action enables demulsification to occur efficiently at low energy consumption levels. This study has revealed that electro-demulsification can effectively treat toluene emulsions stabilized by various surfactants and microemulsion containing toluene. Therefore, this electro-demulsification technology can be further developed for various types of water pollution.
|
|
