| 1. |
- Ferreira Gonzalez, Javier, 1982-
(författare)
-
Textile-enabled Bioimpedance Instrumentation for Personalised Health Monitoring Applications
- 2013
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A growing number of factors, including the costs, technological advancements, an ageing population, and medical errors are leading industrialised countries to invest in research on alternative solutions to improving their health care systems and increasing patients’ life quality. Personal Health System (PHS) solutions envision the use of information and communication technologies that enable a paradigm shift from the traditional hospital-centred healthcare delivery model toward a preventive and person-centred approach. PHS offers the means to follow patient health using wearable, portable or implantable systems that offer ubiquitous, unobtrusive bio-data acquisition, allowing remote access to patient status and treatment monitoring.Electrical Bioimpedance (EBI) technology is a non-invasive, quick and relatively affordable technique that can be used for assessing and monitoring different health conditions, e.g., body composition assessments for nutrition. EBI technology combined with state-of-the-art advances in sensor and textile technology are fostering the implementation of wearable bioimpedance monitors that use functional garments for the implementation of personalised healthcare applications.This research studies the development of a portable EBI spectrometer that can use dry textile electrodes for the assessment of body composition for the purposes of clinical uses. The portable bioimpedance monitor has been developed using the latest advances in system-on-chip technology for bioimpedance spectroscopy instrumentation. The obtained portable spectrometer has been validated against commercial spectrometer that performs total body composition assessment using functional textrode garments.The development of a portable Bioimpedance spectrometer using functional garments and dry textile electrodes for body composition assessment has been shown to be a feasible option. The availability of such measurement systems bring closer the real implementation of personalised healthcare systems.
|
|
| 2. |
- García-Gallego, Sandra, et al.
(författare)
-
Polyanionic N-donor ligands as chelating agents in transition metal complexes : synthesis, structural characterization and antiviral properties against HIV
- 2012
-
Ingår i: Dalton Transactions. - : Royal Society of Chemistry. - 1477-9226 .- 1477-9234. ; 41:21, s. 6488-99
-
Tidskriftsartikel (refereegranskat)abstract
- We describe here the synthesis and characterization of new sulfonated and carboxylated-containing N-donor ligands [Na(4)(edts)]·4H(2)O (2), [Na(2)(dmeddp)]·2H(2)O (3) and [Na(4)(edtp)]·H(2)O (4) (edts = ethylene-diamine- N,N,N',N'-tetraethylenesulfonate ion; dmeddp = dimethyl-ethylene-diamine-N,N,N',N'-tetra-3-propionate ion; edtp = ethylene-diamine-N,N,N',N'-tetra-3-propionate ion) and their corresponding metal (Ni, Co, Cu and Zn) complexes. Mainly, UV-Vis and a computer aided analysis of the EPR spectra provided information on the geometry and structure of the complexes in solution. Some of the metal complexes inhibit HIV replication when treating both pre- and post-infected PBMC cells, and hustle the inhibitory effect compared to the metal salts alone.
|
|
| 3. |
- Ibanez, Borja, et al.
(författare)
-
Cardiac MRI Endpoints in Myocardial Infarction Experimental and Clinical Trials : JACC Scientific Expert Panel
- 2019
-
Ingår i: Journal of the American College of Cardiology. - : Elsevier BV. - 0735-1097. ; 74:2, s. 238-256
-
Forskningsöversikt (refereegranskat)abstract
- After a reperfused myocardial infarction (MI), dynamic tissue changes occur (edema, inflammation, microvascular obstruction, hemorrhage, cardiomyocyte necrosis, and ultimately replacement by fibrosis). The extension and magnitude of these changes contribute to long-term prognosis after MI. Cardiac magnetic resonance (CMR) is the gold-standard technique for noninvasive myocardial tissue characterization. CMR is also the preferred methodology for the identification of potential benefits associated with new cardioprotective strategies both in experimental and clinical trials. However, there is a wide heterogeneity in CMR methodologies used in experimental and clinical trials, including time of post-MI scan, acquisition protocols, and, more importantly, selection of endpoints. There is a need for standardization of these methodologies to improve the translation into a real clinical benefit. The main objective of this scientific expert panel consensus document is to provide recommendations for CMR endpoint selection in experimental and clinical trials based on pathophysiology and its association with hard outcomes.
|
|
| 4. |
- Luperto, Matteo, et al.
(författare)
-
Integrating Social Assistive Robots, IoT, Virtual Communities and Smart Objects to Assist at-Home Independently Living Elders : the MoveCare Project
- 2023
-
Ingår i: International Journal of Social Robotics. - : Springer. - 1875-4791 .- 1875-4805. ; 15:3, s. 517-545
-
Tidskriftsartikel (refereegranskat)abstract
- The integration of Ambient Assisted Living (AAL) frameworks with Socially Assistive Robots (SARs) has proven useful for monitoring and assisting older adults in their own home. However, the difficulties associated with long-term deployments in real-world complex environments are still highly under-explored. In this work, we first present the MoveCare system, an unobtrusive platform that, through the integration of a SAR into an AAL framework, aimed to monitor, assist and provide social, cognitive, and physical stimulation in the own houses of elders living alone and at risk of falling into frailty. We then focus on the evaluation and analysis of a long-term pilot campaign of more than 300 weeks of usages. We evaluated the system's acceptability and feasibility through various questionnaires and empirically assessed the impact of the presence of an assistive robot by deploying the system with and without it. Our results provide strong empirical evidence that Socially Assistive Robots integrated with monitoring and stimulation platforms can be successfully used for long-term support to older adults. We describe how the robot's presence significantly incentivised the use of the system, but slightly lowered the system's overall acceptability. Finally, we emphasise that real-world long-term deployment of SARs introduces a significant technical, organisational, and logistical overhead that should not be neglected nor underestimated in the pursuit of long-term robust systems. We hope that the findings and lessons learned from our work can bring value towards future long-term real-world and widespread use of SARs.
|
|
| 5. |
- Monroy, Javier G., et al.
(författare)
-
Calibration of mox gas sensors in open sampling systems based on gaussian processes
- 2012
-
Ingår i: Proceedings of the IEEE Sensors Conference, 2012. - : IEEE conference proceedings. - 9781457717659 ; , s. 1-4
-
Konferensbidrag (refereegranskat)abstract
- Calibration of metal oxide (MOX) gas sensor for continuous monitoring is a complex problem due to the highly dynamic characteristics of the gas sensor signal when exposed to natural environment (Open Sampling System - OSS). This work presents a probabilistic approach to the calibration of a MOX gas sensor based on Gaussian Processes (GP). The proposed approach estimates for every sensor measurement a probability distribution of the gas concentration. This enables the calculation of confidence intervals for the predicted concentrations. This is particularly important since exact calibration is hard to obtain due to the chaotic nature that dominates gas dispersal. The proposed approach has been tested with an experimental setup where an array of MOX sensors and a Photo Ionization Detector (PID) are placed downwind w.r.t. the gas source. The PID is used to obtain ground truth concentration. Comparison with standard calibration methods demonstrates the advantage of the proposed approach.
|
|
| 6. |
- Monroy, Javier, et al.
(författare)
-
GADEN : A 3D Gas Dispersion Simulator for Mobile Robot Olfaction in Realistic Environments
- 2017
-
Ingår i: Sensors. - Basel, Switzerland : MPDI AG. - 1424-8220. ; 17:7, s. 1479-1494
-
Tidskriftsartikel (refereegranskat)abstract
- This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment.
|
|
| 7. |
- Suarez, David Orozco, et al.
(författare)
-
CMAG : A Mission to Study and Monitor the Inner Corona Magnetic Field
- 2023
-
Ingår i: Aerospace. - 2226-4310. ; 10:12
-
Tidskriftsartikel (refereegranskat)abstract
- Measuring magnetic fields in the inner corona, the interface between the solar chromosphere and outer corona, is of paramount importance if we aim to understand the energetic transformations taking place there, and because it is at the origin of processes that lead to coronal heating, solar wind acceleration, and of most of the phenomena relevant to space weather. However, these measurements are more difficult than mere imaging because polarimetry requires differential photometry. The coronal magnetograph mission (CMAG) has been designed to map the vector magnetic field, line-of-sight velocities, and plane-of-the-sky velocities of the inner corona with unprecedented spatial and temporal resolutions from space. This will be achieved through full vector spectropolarimetric observations using a coronal magnetograph as the sole instrument on board a spacecraft, combined with an external occulter installed on another spacecraft. The two spacecraft will maintain a formation flight distance of 430 m for coronagraphic observations, which requires a 2.5 m occulter disk radius. The mission will be preferentially located at the Lagrangian L5 point, offering a significant advantage for solar physics and space weather research. Existing ground-based instruments face limitations such as atmospheric turbulence, solar scattered light, and long integration times when performing coronal magnetic field measurements. CMAG overcomes these limitations by performing spectropolarimetric measurements from space with an external occulter and high-image stability maintained over time. It achieves the necessary sensitivity and offers a spatial resolution of 2.5 '' and a temporal resolution of approximately one minute, in its nominal mode, covering the range from 1.02 solar radii to 2.5 radii. CMAG relies on proven European technologies and can be adapted to enhance any other solar mission, offering potential significant advancements in coronal physics and space weather modeling and monitoring.
|
|
| 8. |
|
|
| 9. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 10. |
- Barquero-Perez, Oscar, et al.
(författare)
-
On the influence of heart rate and coupling interval prematurity on heart rate turbulence
- 2017
-
Ingår i: IEEE Transactions on Biomedical Engineering. - 1558-2531. ; 64:2, s. 302-309
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Heart rate turbulence (HRT) has been successfully explored for cardiac risk stratification. While HRT is known to be influenced by the heart rate (HR) and the coupling interval (CI), nonconcordant results have been reported on how the CI influences HRT. The purpose of this study is to investigate HRT changes in terms of CI and HR by means of an especially designed protocol. Methods: A dataset was acquired from 11 patients with structurally normal hearts for which CI was altered by different pacing trains and HR by isoproterenol during electrophysiological study (EPS). The protocol was designed so that, first, the effect of HR changes on HRT and, second, the combined effect of HR and CI could be explored. As a complement to the EPS dataset, a database of 24-h Holters from 61 acute myocardial infarction (AMI) patients was studied for the purpose of assessing risk. Data analysis was performed by using different nonlinear ridge regression models, and the relevance of model variables was assessed using resampling methods. The EPS subjects, with and without isoproterenol, were analyzed separately. Results: The proposed nonlinear regression models were found to account for the influence of HR and CI on HRT, both in patients undergoing EPS without isoproterenol and in low-risk AMI patients, whereas this influence was absent in high-risk AMI patients. Moreover, model coefficients related to CI were not statistically significant, p > 0.05, on EPS subjects with isoproterenol. Conclusion: The observed relationship between CI and HRT, being in agreement with the baroreflex hypothesis, was statistically significant (p < 0.05), when decoupling the effect of HR and normalizing the CI by the HR. Significance: The results of this study can help to provide new risk indicators that take into account physiological influence on HRT, as well as to model how this influence changes in different cardiac conditions.
|
|
