| 1. |
- Gallstedt, Mikael, et al.
(författare)
-
Film Extrusion of Crambe abyssinica/Wheat Gluten Blends
- 2017
-
Ingår i: Journal of Visualized Experiments. - : JOURNAL OF VISUALIZED EXPERIMENTS. - 1940-087X. ; :119
-
Tidskriftsartikel (refereegranskat)abstract
- Crambe abyssinica is a plant with potential for use in industrial (non-food) plant oil production. The side stream from this oil production is a high-protein crambe meal that has limited value, as it is not fit for food or feed use. However, it contains proteins that could potentially make it a suitable raw material for higher-value products. The purpose of this study was to find methods of making this side stream into extruded films, showing that products with a higher value can be produced. The study mainly considered the development of material compositions and methods of preparing and extruding the material. Wheat gluten was added as a supportive protein matrix material, together with glycerol as a plasticizer and urea as a denaturant. The extrudate was evaluated with respect to mechanical (tensile testing) and oxygen barrier properties, and the extrudate structure was revealed visually and by scanning electron microscopy. A denser, more homogeneous material had a lower oxygen transmission rate, higher strength, and higher extensibility. The most homogeneous films were made at an extruder die temperature of 125-130 degrees C. It is shown here that a film can be extruded with promising mechanical and oxygen barrier properties, the latter especially after a final compression molding step.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Johansson, Björn, et al.
(författare)
-
Distributed Model Predictive Consensus
- 2006
-
Ingår i: Proceedings of the 17th International Symposium on Mathematical Theory of Networks and Systems. ; , s. 2438-2444
-
Konferensbidrag (refereegranskat)abstract
- In this paper we consider the problem of designing a distributed control strategy such that a linear combination of the states of a number of vehicles coincide at a given time. The vehicles are described by linear difference equations and are subject to convex input constraints. It is demonstrated how primal decomposition techniques and incremental subgradient methods allow us to find a solution in which each vehicle performs individual planning of its trajectory and exchanges critical information with neighbors only. We explore various communication, computation, and control structures, and demonstrate the performance of the algorithms by numerical examples.
|
|
| 6. |
- Johansson, Björn, et al.
(författare)
-
Subgradient methods and consensus algorithms for solving convex optimization problems
- 2008
-
Ingår i: Decision and Control, 2008. CDC 2008. 47th IEEE Conference on. - : IEEE. - 9781424431236 ; , s. 4185-4190
-
Konferensbidrag (refereegranskat)abstract
- In this paper we propose a subgradient method for solving coupled optimization problems in a distributed way given restrictions on the communication topology. The iterative procedure maintains local variables at each node and relies on local subgradient updates in combination with a consensus process. The local subgradient steps are applied simultaneously as opposed to the standard sequential or cyclic procedure. We study convergence properties of the proposed scheme using results from consensus theory and approximate subgradient methods. The framework is illustrated on an optimal distributed finite-time rendezvous problem.
|
|
| 7. |
- Roupé, Mattias, 1975, et al.
(författare)
-
Immersive visualization of Building Information Models
- 2016
-
Ingår i: Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2016). - 9789881902672 ; , s. 673-682
-
Konferensbidrag (refereegranskat)abstract
- The design process of a building often involves many different actors and people with different experiences, level of knowledge and ability to interpret information. The most common information media in these processes are 2D-drawings, documents and 3D images of design. These media can be difficult to interpret and understand and could cause communication difficulties and design errors. However, in this context, Building Information Modelling (BIM) and Virtual Reality (VR) have been shown to offer an efficient communication platform. In this paper we present and evaluate a portable immersive visualization system that uses the BIMs directly from the design tools. The system is validated in a real construction project, where the dif-ferent disciplines in the design process used the system. The result was collected through interviews and observation during usage of the system. All the participants expressed that this type of visual interface helped them to get another level of understanding and perception of space, which lead to better decision-making process and resolving of design issues.
|
|
| 8. |
- Cho, Sung-Woo, et al.
(författare)
-
Injection-molded nanocomposites and materials based on wheat gluten
- 2011
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 48:1, s. 146-152
-
Tidskriftsartikel (refereegranskat)abstract
- This is, to our knowledge, the first study of the injection molding of materials where wheat gluten (WG) is the main component. In addition to a plasticizer (glycerol), 5 wt.% natural montmorillonite clay was added. X-ray indicated intercalated clay and transmission electron microscopy indicated locally good clay platelet dispersion. Prior to feeding into the injection molder, the material was first compression molded into plates and pelletized. The filling of the circular mold via the central gate was characterized by a divergent flow yielding, in general, a stronger and stiffer material in the circumferential direction. It was observed that 20–30 wt.% glycerol yielded the best combination of processability and mechanical properties. The clay yielded improved processability, plate homogeneity and tensile stiffness. IR spectroscopy and protein solubility indicated that the injection molding process yielded a highly aggregated structure. The overall conclusion was that injection molding is a very promising method for producing WG objects.
|
|
| 9. |
- Muneer, Faraz, et al.
(författare)
-
Preparation, Properties, Protein Cross-Linking and Biodegradability of Plasticizer-Solvent Free Hemp Fibre Reinforced Wheat Gluten, Glutenin, and Gliadin Composites
- 2014
-
Ingår i: BioResources. - : BioResources. - 1930-2126 .- 1930-2126. ; 9:3, s. 5246-5261
-
Tidskriftsartikel (refereegranskat)abstract
- The present study is aimed at evaluating the use of plant-based polymers and fibres for the production of sustainable biocomposites. For the first time, plasticiser/solvent-free hemp fibre-reinforced wheat gluten and hemp-gliadin and glutenin composites were obtained by compression moulding at different temperatures. The plasticiser/solvent-free sample preparation method developed in this study facilitated the use of a powdered protein matrix with a mat of randomly oriented hemp fibres. The tensile and protein cross-linking properties, as well as the biodegradability, were investigated. The addition of hemp fibre to the protein matrix increased the E-modulus by 20 to 60% at 130 degrees C. An increase in moulding temperature from 110 to 130 degrees C resulted in an increase in maximum stress due to the formation of intermolecular bonds between protein chains. The gliadin composites had higher E-modulus and maximum stress and showed a larger increase in protein polymerisation with increased temperature compared to the gluten in composites. A comparison of tensile properties revealed that the composites were stiffer and stronger compared to several similarly produced biobased composites. The composites were found to be fully biodegradable under a simulated soil environment after 180 days. Biocomposites produced in the present study were found to be environmentally friendly with fairly good mechanical properties.
|
|
| 10. |
- Kuktaite, Ramune, et al.
(författare)
-
Monitoring Nanostructure Dynamics and Polymerization in Glycerol Plasticized Wheat Gliadin and Glutenin Films : Relation to Mechanical Properties
- 2016
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:6, s. 2998-3007
-
Tidskriftsartikel (refereegranskat)abstract
- Gliadin and glutenin proteins with 10, 20, 30 and 40% of glycerol were compression molded into films (130 °C) and evaluated for protein polymerization, β-sheet structure and nano-structural morphology. Here, for the first time we show how different amounts of glycerol impact the nano-structure and functional properties of the gliadin and glutenin films. Most polymerized protein was found in the gliadin films with 20 and 30% glycerol, and in all the glutenin films (except 10%), by RP-HPLC. A β-sheet-rich protein structure was found to be high in the 10 and 20% glycerol gliadin films, and in the 20 and 30% glycerol glutenin films by FT-IR. Glycerol content of 20, 30 and 40% impacted the nano-structural morphology of the gliadin glycerol films observed by SAXS, and to a limited extent for 10 and 20% glycerol gliadin films revealed by WAXS. No ordered nano-structure was found for the glutenin glycerol films. The 20%, 30% and 40% glycerol films were the most tunable for specific mechanical properties. For the highest stiffness and strength, the 10% glycerol protein films were the best choice.
|
|
