| 1. |
- Pouransari, Zeinab, 1982-
(författare)
-
Fundamental studies of non-premixed combustion in turbulent wall jets using direct numerical simulation
- 2011
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The present thesis deals with the fundamental aspects of turbulent mixingand non-premixed combustion in wall-jet flows. Direct numerical simulations(DNS) of compressible turbulent flows are performed in a wall-jet configura-tion, which has a close resemblance to many industrial combustion applica-tions. The triple ”turbulence-chemistry-wall” interactions are also present inthis flow set-up. These interactions have been addressed by first focusing onturbulent flow effects on the isothermal reaction, including the near-wall issues.Then, by adding heat-release to the simulations, it has been concentrated onheat-release effects on various phenomena that occur in the reacting turbulentwall-jet flow. In the computational domain, fuel and oxidizer enter separatelyin a non-premixed manner and the flow is fully turbulent and subsonic in allsimulations. In the first phase of this study, the case of a turbulent wall-jetincluding an isothermal reaction without heat release is addressed in order toisolate the near-wall effects and the mixing characteristics of the flow and thekey statistics for combustion are studied in the absence of thermal effects. Adeeper insight into three-dimensional mixing and reaction characteristics in aturbulent wall-jet has been gained through investigation of the probability den-sity functions, higher order moments of velocities and reacting scalars and thescalar dissipation rates of different species. In the second phase, DNS of turbu-lent reacting wall-jets including heat release is performed, where a single-stepglobal exothermic reaction with an Arrhenius-type reaction rate is considered.The main target was to identify the heat-release effects on different mixingscales of turbulent wall-jet flow. The scalar dissipation rates, time scale ratios,two-point correlations, one and two-dimensional premultiplied spectra are usedto illustrate the heat release induced modifications. It is observed that heatrelease effects delay the transition process in the chemically reacting cases andenlarge the fluctuation intensities of density and pressure, but have a dampingeffect on all velocity fluctuation intensities. Finer small mixing scales were ob-served in the isothermal simulations and larger vortical structures formed afteradding significant amounts of heat-release. Simulations with different Damk ̈h- oler numbers, but comparable temperature-rise are performed and the expectedbehavior, a thinner flame with increasing Damk ̈hler number, is observed. Finally, some heat transfer related quantities are examined. The wall heat fluxand the corresponding Nusselt numbers are addressed. The near-wall reactioneffects on the skin friction coefficient are studied and further the reaction char-acteristics are investigated throughout the domain.
|
|
| 2. |
- Rasam, Amin, 1979-
(författare)
-
Explicit algebraic subgrid-scale stress and passive scalar flux modeling in large eddy simulation
- 2011
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The present thesis deals with a number of challenges in the field of large eddy simulation (LES). These include the performance of subgrid-scale (SGS) models at fairly high Reynolds numbers and coarse resolutions, passive scalar and stochastic modeling in LES. The fully-developed turbulent channel flow is used as the test case for these investigations. The advantage of this particular test case is that highly accurate pseudo-spectral methods can be used for the discretization of the governing equations. In the absence of discretization errors, a better understanding of the subgrid-scale model performance can be achieved. Moreover, the turbulent channel flow is a challenging test case for LES, since it shares some of the common important features of all wall-bounded turbulent flows. Most commonly used eddy-viscosity-type models are suitable for moderately to highly-resolved LES cases, where the unresolved scales are approximately isotropic. However, this makes simulations of high Reynolds number wall-bounded flows computationally expensive. In contrast, explicit algebraic (EA) model takes into account the anisotropy of SGS motions and performs well in predicting the flow statistics in coarse-grid LES cases. Therefore, LES of high Reynolds number wall-bounded flows can be performed at much lower number of grid points in comparison with other models. A demonstration of the resolution requirements for the EA model in comparison with the dynamic Smagorinsky and its high-pass filtered version for a fairly high Reynolds number is given in this thesis. One of the shortcomings of the commonly used eddy diffusivity model arises from its assumption of alignment of the SGS scalar flux vector with the resolved scalar gradients. However, better SGS scalar flux models that overcome this issue are very few. Using the same methodology that led to the EA SGS stress model, a new explicit algebraic SGS scalar flux model is developed, which allows the SGS scalar fluxes to be partially independent of the resolved scalar gradient. The model predictions are verified and found to improve the scalar statistics in comparison with the eddy diffusivity model. The intermittent nature of energy transfer between the large and small scales of turbulence is often not fully taken into account in the formulation of SGS models both for velocity and scalar. Using the Langevin stochastic differential equation, the EA models are extended to incorporate random variations in their predictions which lead to a reasonable amount of backscatter of energy from the SGS to the resolved scales. The stochastic EA models improve the predictions of the SGS dissipation by decreasing its length scale and improving the shape of its probability density function.
|
|
