| 1. |
- Axelsson, Ulf, et al.
(författare)
-
Risk assessment of high concentrations of molybdenum in forage
- 2018
-
Ingår i: Environmental Geochemistry and Health. - : Springer Science and Business Media LLC. - 0269-4042 .- 1573-2983. ; 4:6, s. 2685-2694
-
Tidskriftsartikel (refereegranskat)abstract
- Molybdenum is toxic to ruminants when present in high levels in forage, causing physiological copper deficiency. A critical level for ruminants is 3–10 mg Mo kg−1 dry matter. The average Mo level varies considerably between different arable soils, depending mainly on soil parent material. This study investigated the possibility of using various existing sources of geospatial information (geophysical, biogeochemical and soil chemical) to develop a geography-based risk assessment system. Forage samples (n = 173) were collected in 2006–2007. Three types of national geoscientific datasets were tested: (1) SEPA topsoil, comprising data from arable land within the Swedish environmental monitoring programme; (2) SGU biogeochemical, containing data from aquatic plant root material collected in small streams; and (3) SGU geophysical, consisting of data from airborne gamma-ray scanning. The digital postcode area map was used for geocoding, with Mo concentrations in forage assigned to arable parts of the corresponding postcode area. By combining this with the three national geoscientific databases, it was possible to construct a risk map using fuzzy classification depicting High-risk, Intermediate-risk, Low-risk and Very-low-risk areas. The map was validated using 42 randomly selected samples. All samples but one with Mo > 3 mg kg−1 were found in postcode areas designated High risk. Thus, the risk map developed seems to be useful as a decision support system on where standard forage analyses need to be supplemented with Mo analyses.
|
|
| 2. |
- Gustafsson, Anders, et al.
(författare)
-
Handbok Fuktsäkra utfackningsväggar med hög prefabriceringsgrad enligt den "holländska metoden"
- 2010
-
Rapport (refereegranskat)abstract
- The aim of this work was to present a solution of design, manufacture and assemble prefabricated infill walls with good quality. The rapport is based on information from Holland. The aim is that designers, manufacturers and contractors and others must have a working basis for how to build and design infill walls with high prefabrication grade in a efficient and quality controlled process. The report also deals with aspects of the wall function and practical observations that are important to consider.
|
|
| 3. |
- Jonsson, Oskar, et al.
(författare)
-
CONSUMER PERCEPTIONS AND PREFERENCES ON SOLID WOOD, WOOD-BASED PANELS, AND COMPOSITES : A REPERTORY GRID STUDY
- 2008
-
Ingår i: Wood and Fiber Science. - 0735-6161. ; 40:4, s. 663-678
-
Tidskriftsartikel (refereegranskat)abstract
- Knowledge about consumer perception and preferences on solid wood, wood-based panels, and wood-based composites is important for product development and marketing. The aim of this study was to identify attributes and associations that people use to describe different types of wood materials and to explore how they relate to preferences. The study involved nine samples that were evaluated with the Kelly's repertory grid technique and content analysis. Based on respondents' answers. 19 core categories reflecting sample attributes were extracted. General preferences for each sample were also recorded. Principal component analysis generated two factors describing 1) naturalness, wood-likeness, softness, unprocessed origin, living, pleasant, and high value; and 2) solid and homogeneous impression. A third, preliminary factor included categories describing irregular pattern,sleekness, and smoothness. The wood samples were most liked, whereas composites and panels were not appreciated. Preferred core categories were naturalness, wood-likeness, smoothness, living impression, and value. The least liked core categories were processed, hard, and high weigh. The implications of the results for product development and marketing are discussed.
|
|
| 4. |
- Lind, Ulrika, et al.
(författare)
-
Analysis of aquaporins from the euryhaline barnacle Balanus improvisus reveals differential expression in response to changes in salinity
- 2017
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 12:7
-
Tidskriftsartikel (refereegranskat)abstract
- Barnacles are sessile macro-invertebrates, found along rocky shores in coastal areas worldwide. The euryhaline bay barnacle Balanus improvisus (Darwin, 1854) (= Amphibalanus improvisus) can tolerate a wide range of salinities, but the molecular mechanisms underlying the osmoregulatory capacity of this truly brackish species are not well understood. Aquaporins are pore-forming integral membrane proteins that facilitate transport of water, small solutes and ions through cellular membranes, and that have been shown to be important for osmoregulation in many organisms. The knowledge of the function of aquaporins in crustaceans is, however, limited and nothing is known about them in barnacles. We here present the repertoire of aquaporins from a thecostracan crustacean, the barnacle B. improvisus, based on genome and transcriptome sequencing. Our analyses reveal that B. improvisus contains eight genes for aquaporins. Phylogenetic analysis showed that they represented members of the classical water aquaporins (Aqp1, Aqp2), the aquaglyceroporins (Glp1, Glp2), the unorthodox aquaporin (Aqp12) and the arthropod-specific big brain aquaporin (Bib). Interestingly, we also found two big brain-like proteins (BibL1 and BibL2) constituting a new group of aquaporins not yet described in arthropods. In addition, we found that the two water-specific aquaporins were expressed as C-terminal splice variants. Heterologous expression of some of the aquaporins followed by functional characterization showed that Aqp1 transported water and Glp2 water and glycerol, agreeing with the predictions of substrate specificity based on 3D modeling and phylogeny. To investigate a possible role for the B. improvisus aquaporins in osmoregulation, mRNA expression changes in adult barnacles were analysed after long-term acclimation to different salinities. The most pronounced expression difference was seen for AQP1 with a substantial (>100-fold) decrease in the mantle tissue in low salinity (3 PSU) compared to high salinity (33 PSU). Our study provides a base for future mechanistic studies on the role of aquaporins in osmoregulation. © 2017 Lind et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
|
|
| 5. |
- Lönnberg, Hanna, et al.
(författare)
-
Synthesis of Polycaprolactone-Grafted Microfibrillated Cellulose for Use in Novel Bionanocomposites-Influence of the Graft Length on the Mechanical Properties
- 2011
-
Ingår i: ACS APPLIED MATERIALS & INTERFACES. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 3:5, s. 1426-1433
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, microfibrillated cellulose (MFC) made from bleached sulfite softwood dissolving pulp was utilized to reinforce a poly(epsilon-caprolactone) (PCL) biopolymer matrix. To improve the dispersibility of the hydrophilic MFC in the nonpolar matrix and the interfacial adhesion in the composite material, we covalently grafted the MFC with PCL via ring-opening polymerization (ROP) of epsilon-caprolactone (epsilon-CL). To be able to investigate the effect of the PCL graft length on the mechanical properties of the composite material, we performed ROP to different molecular weights of the grafts. Bionanocomposites containing 0, 3, and 10 wt % MFC were prepared via hot pressing using both unmodified and PCL grafted MFC (MFC-g-PCL) as reinforcement. PCL grafting resulted in improved dispersion of the MFC in a nonpolar solvent and in the PCL matrix. The mechanical testing of the biocomposites showed an improvement in the mechanical properties for the PCL grafted MFC in comparison to ungrafted MFC. It was also shown that there was an impact on the mechanical properties with respect to the PCL graft lengths, and the strongest biocomposites were obtained after reinforcement with MFC grafted with the longest PCL graft length.
|
|
| 6. |
- Pelliccione, Patrizio, 1975, et al.
(författare)
-
Architecting cars as constituents of a system of systems
- 2016
-
Ingår i: ACM International Conference Proceeding Series. - New York, NY, USA : Association for Computing Machinery (ACM). - 9781450363990 ; , s. 1-7
-
Konferensbidrag (refereegranskat)abstract
- Future transportation systems will be a heterogeneous mix of items with varying connectivity and interoperability. A mix of new technologies and legacy systems will co-exist to realize a variety of scenarios involving not only connected cars but also road infrastructures, pedestrians, cyclists, etc. Future transportation systems can be seen as a System of Systems (SoS), where each constituent system - one of the units that compose an SoS - can act as a standalone system, but the cooperation among the constituent systems enables new emerging and promising scenarios. In this paper we investigate how to architect cars so that they can be constituents of future transportation systems. This work is realized in the context of two Swedish projects coordinated by Volvo Cars and involving some universities and research centers in Sweden and many suppliers of the OEM, including Autoliv, Arccore, Combitech, Cybercom, Knowit, Prevas, ÅF-Technology, Semcom, and Qamcom.
|
|
| 7. |
|
|
| 8. |
- Safavi Nick, Reza, et al.
(författare)
-
A mathematical model of the solid flow behavior in a real dimension blast furnace : Effects of the solid volume fraction on the velocity profile
- 2013
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 84:10, s. 999-1010
-
Tidskriftsartikel (refereegranskat)abstract
- A mathematical model based on the continuum mechanic concept has been developed to describe the profile of solid particles in a blast furnace with respect to the in-furnace conditions and characteristics, e.g., the shape and size of the deadman. The Navier-Stokes differential equation for multi-phase multi-dimensional space has been used to describe the behavior of existing phases. The equation has been modified to make it possible to describe the dual nature of the solid phase in the system by applying the concept of the solid surface stress to characterize the inter-granular surface interactions between particles. Since different phases co-exist in a blast furnace, the volume fraction plays an important role in a blast furnace. Therefore, the influence of three different packing densities (0.68, 0.71, and 0.74, respectively) on the profile of the flow in the upper part of a furnace down to the tuyeres level has been studied. It is shown that an increase in the volume fraction of the solid phase lead to a decrease in magnitude of the velocity. The decrease in the magnitude of the velocity due to an increase in the solid volume fraction will increase the resident time of the particles inside a blast furnace. In addition, it is shown that the solid phase velocity magnitude decreases from the throat to the belly of the furnace for the studied conditions. However, after belly the velocity magnitude increases.
|
|
| 9. |
- Safavi Nick, Reza, et al.
(författare)
-
Mathematical Model of Solid Flow Behavior in a Real Dimension Blast Furnace
- 2013
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 53:6, s. 979-987
-
Tidskriftsartikel (refereegranskat)abstract
- A mathematical model based on the continuum mechanic concept has been developed to describe the profile of solid particles in an industrial scale blast furnace with respect to the in-furnace conditions and its characteristics such as the shape and size of the deadman. The Navier-Stokes differential equation for multi-phase multi-dimensional space has been used to describe the behavior of existing phases. The surface stress tensor has been defined as an extra term and added to the Navier-Stokes equation to describe the particle-particle interactions. This extra term in the Navier-Stokes equation behave as a breaking force when the particles are sliding down. It is shown that the particles change their profile from a V-shape to a W-shape due to the characteristics of the deadman. Moreover, the velocity magnitude is higher at the outer surface of the deadman for higher grid-slabs in this region than the near-wall cells. However, the situation changes as solid particles moving to even lower level of grid-slabs at the outer surface of the deadman in comparison to near-wall cells. It has also been shown that an increase in the magnitude of the effective pressure reduces the velocity magnitude of descending particles.
|
|
| 10. |
- Saffari Pour, Mohsen, 1987-, et al.
(författare)
-
The behavior of impurities during producer gas implementation as alternative fuel in steel reheating furnaces : A CFD and thermochemical study
- 2016
-
Ingår i: ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). - USA : American Society of Mechanical Engineers (ASME). - 9780791850589
-
Konferensbidrag (refereegranskat)abstract
- The use of available and cheap industrial producer gases as alternative fuels for the steel reheating furnaces is an attractive topic for steel industry. The application of producer gases for such furnaces introduces not only the complicated combustion system of Low Calorific Value (LCV) gases, but also several impurities that could be problematic for the quality of final steel products. The quality of steel can be highly affected by the interaction of impurities with iron-oxides at hot slab surfaces. In this research, the combustion of producer gases and the behavior of impurities at the steel slab surface are studied by aid of a novel coupled computational fluid dynamics (CFD) and thermodynamics approach. The impurities are introduced as mineral ash particles with the particle size distributions of 15-100 νm. The CFD predicted data regarding the accumulation of ash particles are extracted from an interface layer at the flaring gas media around the steel slab surface. Later on, these predicted data are used for the thermo-chemical calculations regarding the formation of sticky solutions and stable phases at the steel slab surface. The results show that the particles are more likely follow the flow due to the high injection velocity of fuel (70 m/s) and the dominant inertial forces. More than 90 percent of particles have been evacuated through the exhaust pipes. The only 10 percent of remaining particles due to the high recirculation zones at the middle of furnace and the impinging effect of front walls tend to stick to the side wall of slab in the heating zone more than the soaking zone.
|
|
