| 1. |
- Andersson, Mikael S., et al.
(författare)
-
Thermally induced magnetic relaxation in square artificial spin ice
- 2016
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- The properties of natural and artificial assemblies of interacting elements, ranging from Quarks to Galaxies, are at the heart of Physics. The collective response and dynamics of such assemblies are dictated by the intrinsic dynamical properties of the building blocks, the nature of their interactions and topological constraints. Here we report on the relaxation dynamics of the magnetization of artificial assemblies of mesoscopic spins. In our model nano-magnetic system - square artificial spin ice - we are able to control the geometrical arrangement and interaction strength between the magnetically interacting building blocks by means of nano-lithography. Using time resolved magnetometry we show that the relaxation process can be described using the Kohlrausch law and that the extracted temperature dependent relaxation times of the assemblies follow the Vogel-Fulcher law. The results provide insight into the relaxation dynamics of mesoscopic nano-magnetic model systems, with adjustable energy and time scales, and demonstrates that these can serve as an ideal playground for the studies of collective dynamics and relaxations.
|
|
| 2. |
- Dorri, Samira, 1988-
(författare)
-
Magnetron Sputter Epitaxy of CrB2/TiB2 Diboride Superlattice Thin Films
- 2024
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Artificial superlattices with their exceptional properties have been popular in a broad range of applications such as electronic, magnetic, optical, and hard coating. Another potential application for single crystal artificial superlattices is highly efficient interference neutron optics, owing to an ultimate interface width of just ±½ atomic layer. Moreover, studies of superlattices have been instrumental in understanding the hardening mechanisms in transition metal nitrides and carbides while such studies on transition metal diborides is lacking, despite extensive studies on monolithic transition metal diboride thin films.This work is an initiative to grow CrB2/TiB2 (0001) diboride superlattices epitaxially onto Al2O3 (0001) substrates by direct current magnetron sputter epitaxy implementing two different approaches; compound diboride targets, and co-sputtering of a metal target with a compound target. Effects of substrate temperature, B stoichiometry (B/TM ratio), modulation period Λ = DCrB2 + DTiB2, layer thickness ratio , and relative applied power to magnetrons on the structural and interface quality of superlattices are studied and discussed.Using compound targets, superlattices with thickness ratio Γ = 0.3 and modulation periods Λ between 1 and 10 nm, and with Λ = 6 nm and thickness ratios between 0.2 to 0.8 were synthesized at the optimum sputter gas pressure of pAr = 4 mTorr and a substrate temperature of 600 °C. It is found that superlattices with Λ = 6 nm and Γ in the range of 0.2-0.4 exhibit the highest structural quality. However, B segregation in the over-stoichiometric TiBy layers (y > 2), grown from TiB2 compound target, results in narrow epitaxial superlattice columnar growth with structurally distorted B-rich boundaries. By co-sputtering from Ti and TiB2 targets, y could be reduced from 3.3 to 0.9 in TiBy layers through controlling the relative applied target power. Co-sputtered TiBy single layers and superlattices were grown at substrate temperatures between 600 and 900 °C. 300-nm-thick TiB2.3 single layers grown at 750 °C exhibited epitaxial domains about 10x larger than non-co-sputtered films.A significant enhancement for close-tostoichiometry CrB1.7/TiB2.3 superlattices with modulation periods Λ = 6 nm was achieved at 750 °C. X-ray diffraction, time of flight elastic recoil detection analysis, scanning transmission electron microscopy, electron energy loss spectroscopy, selected area electron diffraction, and nano-indentation are used for characterization.
|
|
| 3. |
|
|
| 4. |
- Lebrun, Delphine, 1985-
(författare)
-
Fabrication of inverse opal oxide structures for efficient light harvesting
- 2014
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Artificial opals are self-assembled face centered cubic (fcc) structures of spherically shaped beads, which interesting applications as photonic band gap materials. Inverse opals are photonic crystals consisting of fcc paced voids of a low refractive index material imbedded in a high refractive index material. Such structures has been used to enhance the photocatalytic effect of different materials and motivates further studies to improve the deposition process of the opal templates and their inversion. We state the fabrication method to design and model metal oxide inverse opals. We have successfully created alumina and alumina-titania inverse opals. With the help of simulations, we engineered inverse opals with self-assembly and atomic layer deposition.
|
|
| 5. |
|
|
| 6. |
- Rowan-Robinson, Richard M., et al.
(författare)
-
Direction-Sensitive Magnetophotonic Surface Crystals
- 2021
-
Ingår i: Advanced Photonics Research. - : John Wiley & Sons. - 2699-9293. ; 2:10
-
Tidskriftsartikel (refereegranskat)abstract
- Nanometer-thin rare-earth-€“transition-metal (RE-€“TM) alloys with precisely controlled compositions and out-of-plane magnetic anisotropy are currently in the focus for ultrafast magnetophotonic applications. However, achieving lateral nanoscale dimensions, crucial for potential device downscaling, while maintaining designable optomagnetic functionality and out-of-plane magnetic anisotropy is extremely challenging. Herein, nanosized Tb18Co82 ferrimagnetic alloys, having strong out-of-plane magnetic anisotropy, within a gold plasmonic nanoantenna array to design a micrometer-scale magnetophotonic crystal that exhibits abrupt and narrow magneto-optical (MO) spectral features that are both magnetic field and light incidence direction controlled are integrated. The narrow Fano-type resonance arises through the interference of the individual nanoantenna’s surface plasmons and a Rayleigh anomaly of the whole nanoantenna array, in both optical and MO spectra, which are demonstrated and explained using Maxwell theory simulations. This robust magnetophotonic crystal opens the way for conceptually new high-resolution light incidence direction sensors, as well as for building blocks for plasmon-assisted all-optical magnetization switching in ferrimagnetic RE-€“TM alloys.
|
|
| 7. |
- Saini, Apurve, et al.
(författare)
-
Magnetically Controlled Electrical Current Through a Colloid
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We demonstrate current transmission through a colloid optimized with both conducting and magnetic properties. The current can be controlled precisely by applying a magnetic field and can be switched. The phenomena depend on a collective and simultaneous control of a microscopic entities. Here, we report on measurements of conductivity of such a colloidal liquid and the viability of developing a working contact. The contact is scalable and might be capable of offering lower loss current conduction (for low or medium voltage applications) compared to contemporary mechanical connections and may solve challenges such as oxidation, mechanical wear, contact welding etc.
|
|
| 8. |
- Saini, Apurve
(författare)
-
Magnetically governed self-assembly of soft matter : A look into interfacial layering, crystallization and percolation
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Self-organisation is the key route for assembling colloidal particles into well-defined structures. Decisive for this are the interactions between the constituents, which are amongst others steric, electrostatic or magnetic. A deep knowledge on the underlying physical processes during self-assembly is crucial for the design and fabrication of well-defined hierarchical architectures from a nanometer scale as well as for realizing smart, functional or stimuli responsive synthetic materials. In this dissertation, the self-assembly of colloidal magnetic particles into organized and multi-layered structures is studied. Particular emphasis is given to solid-liquid boundaries and the response to applied magnetic fields. Particle coatings with specific functional molecules stabilize the nanoparticles (NPs) in the solvent and can simultaneously promote their assembly at a substrate. An example in this context is N-hydroxysuccinimide interacting with (3-aminopropyl)triethoxy silane at the substrate. As a result of this chemical affinity, uniform and densely packed particle wetting layers are seeded which then instate the layering process. As an alternative to chemical binding, the magnetic stray field of a ferrimagnetic (Tb15Co85 film) deposited on a substrate induces particle self-assembly with dense layers as well. The application of an external magnetic field further promotes densification, particle layering and leads to variations in the assembly characteristics such as quasi-domain formation of closely packed layers. At an interface with a magnetic field applied in the plane of the interface, Brownian motion and Neel relaxation of the NPs are decisive for the layering and give raise to these domains. For a magnetic field oriented along the surface normal similar structural layering but denser packing is found. The self-assembly is a relatively slow process and evolves over hours and is maximized, most ordered and dense for superparamagnetic NPs which are single domain and having a large remanent moment and reduced thermal mobility. Small quantities of magnetic micelles in a hybrid magnetic polymer nanocomposite, facilitate the crystallization of Pluronic F127 micelles dissolved in water into single crystalline structures via a micro-shear effect under applied magnetic field. Also, a magnetic field applied to a colloidal dispersion of conducting magnetic and non-magnetic polystyrene microbeads suspended in an oil-based ferrofluid can lead to percolated structures. This allows current transmission and switching. A working contact for possible applications in automotive, switchboard and telecommunications is demonstrated.
|
|
| 9. |
- Stopfel, Henry, et al.
(författare)
-
Magnetic order and energy-scale hierarchy in articial spin ice structures
- 2018
-
Ingår i: Physical Review B. - 2469-9950 .- 2469-9969. ; 98
-
Tidskriftsartikel (refereegranskat)abstract
- In order to explain and predict the properties of many physical systems, it is essential to understand the interplay of different energy scales. Here we present investigations of the magnetic order in thermalized artificial spin-ice structures, with different activation energies of the interacting Ising-like elements. We image the thermally equilibrated magnetic states of the nanostructures using synchrotron-based magnetic microscopy. By comparing results obtained from structures with one or two different activation energies, we demonstrate a clear impact on the resulting magnetic order. The differences are obtained by the analysis of the magnetic spin structure factors, in which the role of the activation energies is manifested by distinct short-range order. These results highlight the potential of artificial spin-ice structures to serve as model systems for designing various energy-scale hierarchies and investigating their impact on the collective dynamics and magnetic order.
|
|
| 10. |
- Stopfel, Henry, 1984-
(författare)
-
Tailoring the magnetic order in mesoscopic spin systems
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Mesoscopic spin systems can be designed and fabricated using modern nano-fabrication techniques. These systems can contain large numbers of patterned ferromagnetic elements, for which the shape will generally determine their effective mesospin dimensionality. The lateral arrangement of these mesospins can be further used to tune the interactions between them.With an appropriate choice of material, it is possible to define a temperature range where thermal fluctuations of these mesospins are experimentally accessible. To actively define this range, we use δ-doped Palladium, a three-layer system of Palladium—Iron—Palladium, for which the Curie-temperature scales with the Iron layer thickness. The patterned mesoscopic elements used in this work have a stadium-like shape that promotes a single magnetic domain state, thus making these islands behave as one-dimensional Ising-like mesospins that can be observed using magnetic imaging techniques.We investigate the impact on the magnetic order resulting from modifications of the square spin ice geometry. By adding, removing and merging elements in the square artificial spin ice architecture, energy-landscape variations can be realized. Firstly, an added interaction modifier is used to equilibrate the interactions between the mesospins at the vertex level, which can restore the degenerate ground state of the square spin ice model. Secondly, the removal of elements can lead to topologically frustrated spin systems, as not all building blocks can simultaneously be in their lowest energy state. Furthermore, the merging results in multiple element sizes in the mesospin system. As the magnetization reversal barrier is dependent on the element size, these mesospin systems have different energy barriers. The thermal ordering process in such a system differs from a single-size element system with its unique energy barrier. Using reciprocal space analysis tools like the magnetic spin structure factor we show that systems with multiple element sizes achieve a higher short-range order then their single-size element references. The magnetic order in mesoscopic spin systems could successfully be tailored by modifications of the lattice geometry.
|
|
