| 1. |
- Balmes, Olivier, et al.
(författare)
-
Cryo-TEM observation of 3-dimensionally ordered aggregates of 5-nm gold particles in organic solvents
- 2004
-
Ingår i: Journal of Nanoparticle Research. - : Springer Science and Business Media LLC. - 1572-896X .- 1388-0764. ; 6:6, s. 569-576
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, we show evidence for the assembly of ordered 3-dimensional aggregates of 5-nm gold particles in toluene, 1-octanol, n-decane, and chloroform. The use of plunge-freezing allows to freeze the solution containing the aggregates at a rate which does not allow reorganisation of the particles during sample preparation. The samples were then observed using cryo-transmission electron microscopy (cryo-TEM) showing that most of the particles were part of ordered aggregates, thus proving that organisation already exists in solution. In some cases, the stability of the sample under the electron beam made it possible to record several pictures of the same aggregate at different angles and build animated tilt series.
|
|
| 2. |
- Balmes, Olivier, et al.
(författare)
-
Imaging atomic structure in metal nanoparticles using high-resolution cryo-TEM
- 2006
-
Ingår i: Microscopy and Microanalysis. - 1435-8115. ; 12:2, s. 145-150
-
Tidskriftsartikel (refereegranskat)abstract
- It has been shown, by imaging gold (200) planes, that it is possible to achieve better than 0.20-nm structural resolution in cryo-transmission electron microscopy (cryo-TEM). This has been done using commercially available cryo equipment and using a 300-kV field emission gun (FEG) TEM. The images of 15-nm gold particles embedded in amorphous frozen water clearly show the (111) planes (separated by 0.235 nm) in gold. Fourier transform demonstrates the presence of (200) planes in the image, proving a resolution of better than 0.20 nm. The experimental results are Supported by image simulations using the multislice method. These simulations suggest that it should be possible to achieve the same resolution even in smaller particles and particles of lighter elements. The crucial experimental problem to overcome is keeping the thickness of the amorphous film low and to work at low electron dose conditions.
|
|
| 3. |
- Geretovszky, Zsolt, et al.
(författare)
-
Aerosol phase generation of In-Se nanoparticles
- 2006
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880. ; 6:3, s. 600-611
-
Tidskriftsartikel (refereegranskat)abstract
- Results on the generation and heat treatment of In-Se nanoparticles, made by heterogeneous condensation of selenium on indium nanoparticles synthesised via the evaporation/condensation route are reported. In-situ aerosol measurements are complemented with ex-situ analysis, to provide structural, morphological, and compositional information on the In-Se nanoparticles. Our results indicate that prior to heat treatment In-Se nanoparticles have a shape in the aerosol phase, similar to an asymmetric dumbbell. The bigger particle of the dumbbell structure is made up of amorphous Se, while the overall composition of the polycrystalline smaller particle is around InSe. The smaller particle has an intrinsic structure, and consists of different InSe-compounds, with a decreasing In content towards the shell. The shape of the In-Se nanoparticles is different in the aerosol phase and on the surface of the samples. The observed variety of particle sizes and shapes on the sample surface is shown to be partly due to the agglomeration of the aerosol phase binaries (i.e., dumbbells) via coalescence on the surface of the sample and wetting of the sample surface by the Se nanoparticles. These processes make the bigger particle of the dumbbell structure appear almost perfectly hemispherical on the sample surfaces. During heat treatment at lower temperatures mainly the evaporative removal of the big Se particle of the dumbbell structure will take place. Annealing of the smaller particles starts to dominate at temperatures above 240 degrees C and makes the composition of the small particles closer to that of the thermodynamically most favoured In2Se3.
|
|
| 4. |
|
|
| 5. |
- Karlsson, Martin, et al.
(författare)
-
Size- and compostition-controlled Au-Ga aerosol nanoparticles
- 2004
-
Ingår i: Aerosol Science and Technology. - : Informa UK Limited. - 1521-7388 .- 0278-6826. ; 38:9, s. 948-954
-
Tidskriftsartikel (refereegranskat)abstract
- A simple gas-phase method has been developed for producing size- and composition-controlled nanoparticles of binary alloys. The process includes the formation and classification of aerosol nanoparticles of one material and the subsequent condensation of a controlled shell of another. The shell thickness is controlled by the evaporation temperature of the second material. Here we study the Au-Ga system with particle compositions ranging from pure Au to 50 atomic percent Ga. Transmission electron microscopy was used to study the morphology, composition, and structure of the generated particles.
|
|
| 6. |
- Karlsson, Martin, et al.
(författare)
-
Size-controlled nanoparticles by thermal cracking of iron pentacarbonyl
- 2005
-
Ingår i: Applied Physics A: Materials Science & Processing. - : Springer Science and Business Media LLC. - 1432-0630. ; 80:7, s. 1579-1583
-
Tidskriftsartikel (refereegranskat)abstract
- A gas-phase method has been developed for producing size-controlled nanoparticles by thermal cracking of iron pentacarbonyl. The method includes the formation of iron particles from vapor emanating from the cracking of the volatile compound and subsequent compacting of the selected particles. Different temperature steps were involved in the process, and their effects on the particle production were investigated. On-line differential mobility measurements and off-line transmission electron microscopy (TEM) were used to study the morphology, composition and structure of the generated particles. The aim of the study was to produce nanoparticles of pure iron. After transportation in air, the composition of the particles was analyzed by TEM and found to be magnetite, Fe3O4. The oxidation may be attributed to the exposure to air and humidity during the transport. The phase of the uncontaminated particles could not be determined. Tests for growth of silicon nanowhiskers using nanoparticles produced with this method were successful.
|
|
| 7. |
- Dick Thelander, Kimberly, et al.
(författare)
-
Improving InAs nanotree growth with composition-controlled Au-In nanoparticles
- 2006
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 17:5, s. 1344-1350
-
Tidskriftsartikel (refereegranskat)abstract
- Au nanoparticles are commonly used as seeds for epitaxial growth of III-V semiconductor nanowires. However, the interaction between Au and In-containing III-V materials makes it difficult to control the growth of more complex nanowire structures in materials such as InAs. Here we report the growth of InAs nanowires and branched nanotrees using Au and Au-In nanoparticles. We show that the initial composition of the particle does not affect the morphology of the first-generation nanowires, nor does it affect the final composition of the particle after growth. However, when the Au-In particles were used to seed a second generation of nanowires, producing nanotrees, the branches exhibited a 2-3 times higher growth rate and more regular shape than those seeded by pure Au particles. This result is attributed to the decreased interaction between the seed particle and the trunk nanowires when Au-In particles are used. Thus the incorporation of In into the seed particle during particle production allows for modification of the particle-wire interaction.
|
|
| 8. |
- Dick Thelander, Kimberly, et al.
(författare)
-
Self-assembled InAs nanowire networks
- 2005
-
Ingår i: Book of extended abstracts: MRS Fall Meet, Boston, Ma, USA, 2005.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 9. |
- Karlsson, Lisa, et al.
(författare)
-
Crystal structure of branched epitaxial III-V nanotrees
- 2006
-
Ingår i: Nano. - 1793-2920. ; 1:2, s. 139-151
-
Tidskriftsartikel (refereegranskat)abstract
- In this review we discuss the morphology and crystal structure of branched epitaxial III-V semiconductor structures, so called nanotrees, based on our own work with GaP, InAs and GaP/InP. These structures are formed by epitaxial growth in a step-wise procedure where each level can be individually controlled in terms of diameter, length and composition. Poly-typism is commonly observed for III-Vs with zinc blende, wurtzite or combinations thereof as the resulting crystal structure. Here we review GaP as an example of zinc blende and InAs of wurtzite type of growth in terms of nanotrees with two to three levels of growth. Included are also previously unpublished results on the growth of GaP/InP nanotrees to demonstrate effects of heteroepitaxial growth with substantial mismatch. For these structures a topotaxial growth behavior was observed with InP wires crawling along or spiraling around the GaP nanowires acting as a free-standing substrates.
|
|
| 10. |
|
|
