| 1. |
- Matus, M., et al.
(författare)
-
Key Comparison EURAMET.L-K1.2011 Measurement of gauge blocks by interferometry
- 2016
-
Ingår i: Metrologia. - 0026-1394 .- 1681-7575. ; 53:1A
-
Tidskriftsartikel (refereegranskat)abstract
- The key comparison EURAMET.L-K1.2011 on gauge blocks was carried out in the framework of a EURAMET project starting in 2012 and ending in 2015. It involved the participation of 24 National Metrology Institutes from Europe and Egypt, respectively. 38 gauge blocks of steel and ceramic with nominal central lengths between 0.5 mm and 500 mm were circulated. The comparison was conducted in two loops with two sets of artifacts. A statistical technique for linking the reference values was applied. As a consequence the reference value of one loop is influenced by the measurements of the other loop although they did not even see the artifacts of the others. This influence comes solely from three "linking laboratories" which measure both sets of artifacts. In total there were 44 results were not fully consistent with the reference values. This represents 10% of the full set of 420 results which is a considerable high number. At least 12 of them are clearly outliers where the participants have been informed by the pilot as soon as possible. The comparison results help to support the calibration and measurement capabilities (CMCs) of the laboratories involved in the CIPM MRA.
|
|
| 2. |
- Gómez, M., et al.
(författare)
-
From agroindustries to integrated biomass logistics centres. Agroinlog project : Summary of final results
- 2020
-
Ingår i: European Biomass Conference and Exhibition Proceedings. - : ETA-Florence Renewable Energies. ; , s. 941-952
-
Konferensbidrag (refereegranskat)abstract
- AGROinLOG project has tested the integrated biomass logistics centres (IBLC) concept in three real agro-industries in Europe. The relevance of the IBLC strategy relies on the fact that it allows agro-industries to create a new activity with lower investment, increasing incomes, stabilizing their annual activity (avoiding idle periods) and maintaining or creating new jobs. The demos’ studies were performed in Spain at a fodder industry, in Greece at an olive oil industry, and in Sweden inside a cereal processing industry. AGROinLOG validated these demos´ business models from a holistic perspective, also studying the replicability of the IBLC business model in other agro-industries from different sectors (vegetable oil extraction, olive oil chain, feed & fodder, wine, grain chain and sugar industry). Sectorial analysis was carried out as well, allowing the identification of opportunities among the targeted sector to replicate the IBLC concept, drawing barriers to overcome in each case. Thus, technical, economic and environmental feasibility of integrated biomass logistics centers (IBLCs) for food and non-food products have been assessed in detail.
|
|
| 3. |
- Jonauskaite, D., et al.
(författare)
-
Universal Patterns in Color-Emotion Associations Are Further Shaped by Linguistic and Geographic Proximity
- 2020
-
Ingår i: Psychological Science. - : SAGE Publications Inc.. - 0956-7976 .- 1467-9280. ; 31:10, s. 1245-1260
-
Tidskriftsartikel (refereegranskat)abstract
- Many of us “see red,” “feel blue,” or “turn green with envy.” Are such color-emotion associations fundamental to our shared cognitive architecture, or are they cultural creations learned through our languages and traditions? To answer these questions, we tested emotional associations of colors in 4,598 participants from 30 nations speaking 22 native languages. Participants associated 20 emotion concepts with 12 color terms. Pattern-similarity analyses revealed universal color-emotion associations (average similarity coefficient r =.88). However, local differences were also apparent. A machine-learning algorithm revealed that nation predicted color-emotion associations above and beyond those observed universally. Similarity was greater when nations were linguistically or geographically close. This study highlights robust universal color-emotion associations, further modulated by linguistic and geographic factors. These results pose further theoretical and empirical questions about the affective properties of color and may inform practice in applied domains, such as well-being and design. © The Author(s) 2020.
|
|
| 4. |
- Bohlin, I, et al.
(författare)
-
Mapping potential location for bilberry picking with remote sensing, local field data andphone application
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The aim of the study was to create a practical method for identifying potential locations for bilberry picking with help of remote sensing, local field data and phone application to support the development of the local berry value chain. Local field data w as collected 2021 and 2022 and consisted 503 and 525 plots from a study area of circa 25x45km in Västerbotten, Sweden. The potential for bilberry production was evaluated by measuring the shrub cover and amount of raw berries. Wall to wall remote sensing d ata included a Sentinel 2 image from same summer, airborne laser scanning data from 2020 and other map products. We created classification models for bilberry shrub and yield using both logistic regression (2 classes) and ordinal regression (3 classes) mod els using 2021 data, and validated and calibrated models with 2022 data. Predictor variables consisted of spectral metrics from satellite data; structural metrics from laser data; existing raster maps of tree species, stand attributes, site index, soil moi sture and land use classes. The 2 class models performed better than three class models, delivering the AUC 0.73, overall accuracy 0.83 and kappa value 0.51 for best bilberry shrub model and 0.75, 0.77 and 0.50 respectively for best bilberry yield model. T he best models included both laser based structural metrics describing e.g canopy closure and spectral metrics, but also e.g. volume of pine, soil moisture and site index were found significant predictor variables. Calibration of the models improved annual predictions and the validation of the 2021 raster maps with 2022 data produced similar AUC, OA, and kappa values for bilberry yield (0.73, 0.74 and 0.46), but lower for bilberry shrub (0.61, 0.68 and 0.24). A dedicated phone application was developed duri ng the project, which was used both for collecting the field data and for presenting the potential locations of berry yields. Local berry maps can help berry pickers easier to find the berries in forest landscape and therefore support local berry value cha in. This study is part of the FAIRCHAIN project, which has received funding from the European Union’s funding programme H2020 research and innovation programme under grand agreement 101000723.
|
|
| 5. |
- de Peppo, Giuseppe Maria, 1981, et al.
(författare)
-
Free-form-fabricated commercially-pure Ti and Ti6Al4V porous scaffolds support the growth of human embryonic stem cell-derived medsodermal progenitors
- 2012
-
Ingår i: The Scientific World Journal. - : Hindawi Limited. - 2356-6140 .- 1537-744X. ; 2012
-
Tidskriftsartikel (refereegranskat)abstract
- Commercially-pure titanium (cp-Ti) and the titanium-aluminum-vanadium alloy (Ti6Al4V) are widely used as reconstructive implants for skeletal engineering applications, due to their good mechanical properties, biocompatibility and ability to integrate with the surrounding bone. Electron beam melting technology (EBM) allows the fabrication of customized implants with tailored mechanical properties and high potential in the clinical practice. In order to augment the interaction with the biological tissue, stem cells have recently been combined with metallic scaffolds for skeletal engineering applications. We previously demonstrated that human embryonic stem cell-derived mesodermal progenitors (hES-MPs) hold a great potential to provide a homogeneous and unlimited supply of cells for bone engineering applications. This study demonstrates the effect of EBM-fabricated cp-Ti and Ti6Al4V porous scaffolds on hES-MPs behavior, in terms of cell attachment, growth and osteogenic differentiation. Displaying different chemical composition but similar surface properties, EBM-fabricated cp-Ti and Ti6Al4V scaffolds supported cell attachment and growth, and did not seem to alter the expression of genes involved in osteogenic differentiation and affect the alkaline phosphatase activity. In conclusion, interfacing hES-MPs to EBM-fabricated scaffolds may represent an interesting strategy for design of third-generation biomaterials, with the potential to promote implant integration in clinical conditions characterized by poor bone quality. Copyright 2012 G. M. de Peppo et al.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Karlsson, Hanna, et al.
(författare)
-
Cell membrane damage and protein interaction induced by copper containing nanoparticles-Importance of the metal release process
- 2013
-
Ingår i: Toxicology. - : Elsevier BV. - 0300-483X .- 1879-3185. ; 313:1, s. 59-69
-
Tidskriftsartikel (refereegranskat)abstract
- Cu-containing nanoparticles are used in various applications in order to e.g. achieve antimicrobial activities and to increase the conductivity of fluids and polymers. Several studies have reported on toxic effects of such particles but the mechanisms are not completely clear. The aim of this study was to investigate the interactions between cell membranes and well-characterized nanoparticles of CuO, Cu metal, a binary Cu-Zn alloy and micron-sized Cu metal particles. This was conducted via in vitro investigations of the effects of the nanoparticles on (i) cell membrane damage on lung epithelial cells (A549), (ii) membrane rupture of red blood cells (hemolysis), complemented by (iii) nanoparticle interaction studies with a model lipid membrane using quartz crystal microbalance with dissipation monitoring (QCM-D). The results revealed that nanoparticles of the Cu metal and the Cu-Zn alloy were both highly membrane damaging and caused a rapid (within 1 h) increase in membrane damage at a particle mass dose of 20 mu g/mL, whereas the CuO nanoparticles and the micron-sized Cu metal particles showed no such effect. At similar nanoparticle surface area doses, the nano and micron-sized Cu particles showed more similar effects. The commonly used LDH (lactate dehydrogenase) assay for analysis of membrane damage was found impossible to use due to nanoparticle-assay interactions. None of the particles induced any hemolytic effects on red blood cells when investigated up to high particle concentrations (1 mg/mL). However, both Cu and Cu-Zn nanopartides caused hemoglobin aggregation/precipitation, a process that would conceal a possible hemolytic effect. Studies on interactions between the nanoparticles and a model membrane using QCM-D indicated a small difference between the investigated particles. Results of this study suggest that the observed membrane damage is caused by the metal release process at the cell membrane surface and highlight differences in reactivity between metallic nanoparticles of Cu and Cu-Zn and nanoparticles of CuO.
|
|
| 10. |
|
|
