| 1. |
- Aamodt, K., et al.
(författare)
-
Alignment of the ALICE Inner Tracking System with cosmic-ray tracks
- 2010
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 5
-
Konferensbidrag (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 mu m in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10(5) charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.
|
|
| 2. |
- Güsten, R., et al.
(författare)
-
APEX - The Atacama Pathfinder Experiment
- 2006
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 6267 I
-
Konferensbidrag (refereegranskat)abstract
- APEX, the Atacama Pathfinder Experiment, has been successfully commissioned and is in operation now. This novel submillimeter telescope is located at 5107 m altitude on Llano de Chajnantor in the Chilean High Andes, on what is considered one of the world's outstanding sites for submillimeter astronomy. The primary reflector with 12 m diameter has been carefully adjusted by means of holography. Its surface smoothness of 17-18 μm makes APEX suitable for observations up to 200 μm, through all atmospheric submm windows accessible from the ground.
|
|
| 3. |
- Aguilar, J. A., et al.
(författare)
-
Hardware Development for the Radio Neutrino Observatory in Greenland (RNO-G)
- 2022
-
Ingår i: 37th International Cosmic Ray Conference, ICRC2021. - Trieste, Italy : Proceedings of Science.
-
Konferensbidrag (refereegranskat)abstract
- The Radio Neutrino Observatory in Greenland (RNO-G) is designed to make the first observations of ultra-high energy neutrinos at energies above 10 PeV, playing a unique role in multi-messenger astrophysics as the world's largest in-ice Askaryan radio detection array. The experiment will be composed of 35 autonomous stations deployed over a 5 x 6 km grid near NSF Summit Station in Greenland. The electronics chain of each station is optimized for sensitivity and low power, incorporating 150 - 600 MHz RF antennas at both the surface and in ice boreholes, low-noise amplifiers, custom RF-over-fiber systems, and an FPGA-based phased array trigger. Each station will consume 25 W of power, allowing for a live time of 70% from a solar power system. The communications system is composed of a high-bandwidth LTE network and an ultra-low power LoRaWAN network. I will also present on the calibration and DAQ systems, as well as status of the first deployment of 10 stations in Summer 2021.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Bartholomay, S., et al.
(författare)
-
Cross-talk compensation for blade root flap-and edgewise moments on an experimental research wind turbine and comparison to numerical results
- 2018
-
Ingår i: Proceedings of the ASME Turbo Expo. - : ASME Press. - 9780791851180
-
Konferensbidrag (refereegranskat)abstract
- In the current paper a method to correct cross-talk effects for strain-gauge measurements is presented. Themethod is demonstrated on an experimental horizontal axiswind turbine. The procedure takes cross-moments (flapwise on edgewise moments and vice versa) as well as axialacceleration into account. The results from the experimental setup are compared to numerical URANS calculationsand the medium-fidelity code Qblade for a baseline caseand two yawed inflow situations.
|
|
| 7. |
|
|
| 8. |
- Butterworth, J., et al.
(författare)
-
Les Houches 2013: Physics at TeV Colliders: Standard Model Working Group Report
- 2014
-
Konferensbidrag (refereegranskat)abstract
- This Report summarizes the proceedings of the 2013 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt primarily with (1) the techniques for calculating standard model multi-leg NLO and NNLO QCD and NLO EW cross sections and (2) the comparison of those cross sections with LHC data from Run 1, and projections for future measurements in Run 2.
|
|
| 9. |
|
|
| 10. |
- Teyssier, D., et al.
(författare)
-
Herschel/HIFI In-flight commissioning and performance
- 2010
-
Ingår i: 21st International Symposium on Space Terahertz Technology 2010, ISSTT 2010; Oxford; United Kingdom; 23 March 2010 through 25 March 2010. - 9781617823626 ; , s. 23-28
-
Konferensbidrag (refereegranskat)abstract
- The Herschel Space Observatory was successfully launched on the 14th of May, 2009, lifting into space the Heterodyne Instrument for the Far-Infrared (HIFI). After the standard early orbit operations on the Space-craft, the instrument was switched on for the first time on the 24th of May, kicking off an instrument Commissioning period of more than a month and a half. We present here the outcome of this Commissioning campaign, including the measured in-flight performance of the instrument. Among the challenges encountered during this period was the need to optimize the stability of the signal provided by the Local Oscillator (LO) chains in some of the frequency bands, in particular that covering the singly Ionized Carbon (C+) line at the upper edge of the HIFI range, and one of the backbones of the science program of the instrument. The same concept also allowed significant improvements in the upper end of the 3b LO chain. Another noticeable achievement was the very good co-alignment measured between the mixer beams in the respective H and V polarizations offered by HIFI, allowing for more than a simple build-in redundancy, as the observing efficiency will really benefits from the combination of the two mixers.
|
|
