| 1. |
- Aldaeus, Fredrik, et al.
(författare)
-
The supramolecular structure of cellulose-rich wood pulps can be a determinative factor for enzymatic hydrolysability
- 2015
-
Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 22:6, s. 3991-4002
-
Tidskriftsartikel (refereegranskat)abstract
- The enzymatic hydrolysability of three industrial pulps, five lab made pulps, and one microcrystalline cellulose powder was assessed using commercial cellulolytic enzymes. To gain insight into the factors that influence the hydrolysability, a thorough characterization of the samples was done, including their chemical properties (cellulose content, hemicellulose content, lignin content, and kappa number), their macromolecular properties (peak molar mass, number-average molar mass, weight-average molar mass, polydispersity, and limiting viscosity) and their supramolecular properties (fibre saturation point, specific surface area, average pore size, and crystallinity). The hydrolysability was assessed by determination of initial conversion rate and final conversion yield, with conversion yield defined as the amount of glucose in solution per unit of glucose in the substrate. Multivariate data analysis revealed that for the investigated samples the conversion of cellulose to glucose was mainly dependent on the supramolecular properties, such as specific surface area and average pore size. The molar mass distribution, the crystallinity, and the lignin content of the pulps had no significant effect on the hydrolysability of the investigated samples.
|
|
| 2. |
- Biollaz, S., et al.
(författare)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 1
- 2018
-
Rapport (refereegranskat)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). In practice, a trade-off between reliability, accuracy and cost has to be reached when selecting the proper analysis technique for a specific application. The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to(biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. The report is composed of a set of 2 documents. Document 1(the present report) describes the available analysis techniques (both commercial and underdevelopment) for the measurement of different compounds of interest present in gasification gas. The objective is to help the reader to properly select the analysis technique most suitable to the target compounds and the intended application. Document 1 also describes some examples of application of gas analysis at commercial-, pilot- and research gasification plants, as well as examples of recent and current joint research activities in the field. The information contained in Document 1 is complemented with a book of factsheets on gas analysis techniques in Document 2, and a collection of video blogs which illustrate some of the analysis techniques described in Documents 1 and 2.This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
| 3. |
- Biollaz, S., et al.
(författare)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 2 - Factsheets on gas analysis techniques
- 2018
-
Rapport (refereegranskat)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to (biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
| 4. |
- Mazur, Mikael, 1990, et al.
(författare)
-
Continuous Fiber Sensing over Field-Deployed Metro Link using Real-Time Coherent Transceiver and DAS
- 2022
-
Ingår i: 2022 European Conference on Optical Communication, ECOC 2022. - 9781957171159
-
Konferensbidrag (refereegranskat)abstract
- We use an FPGA-based real-time coherent transceiver prototype with continuous μs-level state-of-polarization readouts and a commercial DAS system to perform fiber sensing. Link monitoring and active detection of link tampering is demonstrated using both systems, showing how SOP-based sensing complements DAS in metro environments.
|
|
| 5. |
- Piri, R., et al.
(författare)
-
"Global" cardiac atherosclerotic burden assessed by artificial intelligence-based versus manual segmentation in F-18-sodium fluoride PET/CT scans: Head-to-head comparison
- 2022
-
Ingår i: Journal of Nuclear Cardiology. - : Springer Science and Business Media LLC. - 1071-3581 .- 1532-6551. ; 29:5, s. 2531-2539
-
Tidskriftsartikel (refereegranskat)abstract
- Background Artificial intelligence (AI) is known to provide effective means to accelerate and facilitate clinical and research processes. So in this study it was aimed to compare a AI-based method for cardiac segmentation in positron emission tomography/computed tomography (PET/CT) scans with manual segmentation to assess global cardiac atherosclerosis burden. Methods A trained convolutional neural network (CNN) was used for cardiac segmentation in F-18-sodium fluoride PET/CT scans of 29 healthy volunteers and 20 angina pectoris patients and compared with manual segmentation. Parameters for segmented volume (Vol) and mean, maximal, and total standardized uptake values (SUVmean, SUVmax, SUVtotal) were analyzed by Bland-Altman Limits of Agreement. Repeatability with AI-based assessment of the same scans is 100%. Repeatability (same conditions, same operator) and reproducibility (same conditions, two different operators) of manual segmentation was examined by re-segmentation in 25 randomly selected scans. Results Mean (+/- SD) values with manual vs. CNN-based segmentation were Vol 617.65 +/- 154.99 mL vs 625.26 +/- 153.55 mL (P = .21), SUVmean 0.69 +/- 0.15 vs 0.69 +/- 0.15 (P = .26), SUVmax 2.68 +/- 0.86 vs 2.77 +/- 1.05 (P = .34), and SUVtotal 425.51 +/- 138.93 vs 427.91 +/- 132.68 (P = .62). Limits of agreement were - 89.42 to 74.2, - 0.02 to 0.02, - 1.52 to 1.32, and - 68.02 to 63.21, respectively. Manual segmentation lasted typically 30 minutes vs about one minute with the CNN-based approach. The maximal deviation at manual re-segmentation was for the four parameters 0% to 0.5% with the same and 0% to 1% with different operators. Conclusion The CNN-based method was faster and provided values for Vol, SUVmean, SUVmax, and SUVtotal comparable to the manually obtained ones. This AI-based segmentation approach appears to offer a more reproducible and much faster substitute for slow and cumbersome manual segmentation of the heart.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Batstone, K., et al.
(författare)
-
Robust Self-calibration of Constant Offset Time-difference-of-arrival
- 2019
-
Ingår i: 2019 IEEE International Conference on Acoustics, Speech, and Signal Processing, ICASSP 2019 - Proceedings. - 9781479981311 ; 2019-May, s. 4410-4414
-
Konferensbidrag (refereegranskat)abstract
- In this paper we study the problem of estimating receiver and sender positions from time-difference-of-arrival measurements, assuming an unknown constant time-difference-of-arrival offset. This problem is relevant for example for repetitive sound events. In this paper it is shown that there are three minimal cases to the problem. One of these (the five receiver, five sender problem) is of particular importance. A fast solver (with run-time under 4 μs) is given. We show how this solver can be used in robust estimation algorithms, based on RANSAC, for obtaining an initial estimate followed by local optimization using a robust error norm. The system is verified on both real and synthetic data.
|
|
| 9. |
- Johansson, C.B., et al.
(författare)
-
3.16 Histological Analysis
- 2017. - 2
-
Ingår i: Comprehensive Biomaterials II. - : Elsevier. - 9780081006924 ; , s. 335-363
-
Bokkapitel (refereegranskat)abstract
- All devices are recognized as foreign body materials once inserted in the living body, and they will all cause foreign body reactions. To determine the degree of integration, both qualitative and quantitative data are obtained by examining histological sections. This technique is the state of the art and has been so for decades. Quantitative analysis is important, but one cannot solely rely on data that computer programs rather rapidly generate. The qualitative examinations are of utmost importance. Tissue which has been properly fixed, processed, and maintained in the laboratories can be used for a broad range of histological analysis. This chapter presents some qualitative and quantitative state-of-the-art techniques used in relation to bone tissue analyses around biomaterials. Methods are described from fixation of tissue, preparation of sections, routine and new techniques adjusted to state-of-the-art techniques, and some complementary techniques. The importance of investigating the tissue reactions in various levels, from light microscopic to molecular, such as the localization of proteins as well as some quantification methods will be presented. In the future, we foresee even more complementary techniques to obtain more information regarding this tissue.
|
|
| 10. |
- Larsson, Malin K., et al.
(författare)
-
Endocardial border delineation capability of a multimodal polymer-shelled contrast agent
- 2014
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- BackgroundA novel polymer-shelled contrast agent (CA) with high mechanical and chemical stability was recently developed [1]. In excess to its ultrasound properties, it also supports targeted and multimodal imaging [2-4]. Even though these new possibilities have the potential to lead to new methodologies and approaches for non-invasive diagnosis, it is important that the fundamental diagnostic features in contrast-enhanced ultrasound are preserved. The aim of this study was therefore to examine the clinical use of the polymer-shelled CA by analyzing the left ventricular endocardial border delineation capability in a porcine model. In addition, physiological effects due to CA injections were studied.MethodsThe endocardial border delineation capability was assessed in a comparative study, which included three doses (1.5 ml, 3 ml and 5 ml, [5x108 MBs/ml]) of the polymer-shelled CA and the commercially available CA SonoVue® (1.5 ml, [2-5x108 MBs/ml]). Ultrasound images of the left ventricle were evaluated manually by blinded observers (n=3) according to a 6-segment model, in which each segment was graded as 0=not visible, 1=barely visible or 2=well visible, as well as semi-automatically by a segmentation software. Furthermore, duration of clinically useful contrast enhancement and changes in physiological parameters were evaluated.ResultsFor the highest dose of the polymer-shelled CA, the obtained segment scores, time for clinically sufficient contrast enhancement and semi-automatic delineation capability were comparable to SonoVue®. Moreover, neither dose of the polymer-shelled CA did affect the physiological parameters.ConclusionThis study demonstrated that the polymer-shelled CA can be used in contrast-enhanced diagnostic imaging without influence on major physiological parameters.
|
|
