| 1. |
- Bloom, Erica, et al.
(författare)
-
Molds and mycotoxins in dust from water-damaged homes in New Orleans after hurricane Katrina
- 2009
-
Ingår i: Indoor Air. - : Hindawi Limited. - 0905-6947 .- 1600-0668. ; 19:2, s. 153-158
-
Tidskriftsartikel (refereegranskat)abstract
- Dust collected in New Orleans homes mold-contaminated because of the flooding after hurricane Katrina was analyzed for molds and mycotoxins. The mycoflora was studied by cultivation and quantitative PCR for selected molds. The most commonly found mold taxa were Aspergillus, Cladosporium, and Penicillium. Verrucarol, a hydrolysis product of macrocyclic trichothecenes predominately produced by Stachybotrys spp. was identified in three dust samples by gas chromatography-tandem mass spectrometry, and sterigmatocystin (produced by various Aspergillus spp.) was found in two samples by high pressure liquid chromatography-tandem mass spectrometry. This is the first demonstration of mycotoxins in Katrina-associated dust samples. The analytical methods used represent valuable tools in further studies on bioaerosol exposure and health risks.
|
|
| 2. |
- Choi, H., et al.
(författare)
-
Residential culturable fungi, (1-3,1-6)-beta-d-glucan, and ergosterol concentrations in dust are not associated with asthma, rhinitis, or eczema diagnoses in children
- 2014
-
Ingår i: Indoor Air. - : Wiley-Blackwell. - 0905-6947 .- 1600-0668. ; 24:2, s. 158-170
-
Tidskriftsartikel (refereegranskat)abstract
- Qualitative reporting of home indoor moisture problems predicts respiratory diseases. However, causal agents underlying such qualitative markers remain unknown. In the homes of 198 multiple allergic case children and 202 controls in Sweden, we cultivated culturable fungi by directly plating dust, and quantified (1-3, 1-6)-beta-d-glucan and ergosterol in dust samples from the child's bedroom. We examined the relationship between these fungal agents and degree of parent or inspector-reported home indoor dampness, and microbiological laboratory's mold index. We also compared the concentrations of these agents between multiple allergic cases and healthy controls, as well as IgE-sensitization among cases. The concentrations of culturable fungal agents were comparable between houses with parent and inspector-reported mold issues and those without. There were no differences in concentrations of the individual or the total summed culturable fungi, (1-3, 1-6)-beta-d-glucan, and ergosterol between the controls and the multiple allergic case children, or individual diagnosis of asthma, rhinitis, or eczema. Culturable fungi, (1-3, 1-6)-beta-d-glucan, and ergosterol in dust were not associated with qualitative markers of indoor dampness or mold or indoor humidity. Furthermore, these agents in dust samples were not associated with any health outcomes in the children.
|
|
| 3. |
|
|
| 4. |
- Andersson, A, et al.
(författare)
-
The Foiling Optimist
- 2017
-
Ingår i: The Proceedings of the 4th International Conference on Innovation in High Performance Sailing Yachts, Lorient, France, 28-30 June 2017.. ; , s. 19-30
-
Konferensbidrag (refereegranskat)
|
|
| 5. |
- Andersson, S., et al.
(författare)
-
Sulfur recirculation for increased electricity production in Waste-to-Energy plants
- 2014
-
Ingår i: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 34:1, s. 67-78
-
Tidskriftsartikel (refereegranskat)abstract
- Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Goteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop. The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO3 concentrations, which may otherwise induce low temperature corrosion. In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 degrees C and 525 degrees C) compared to the reference exposure. The corrosion rates were reduced by 60-90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 degrees C with sulfur recirculation in operation were similar or lower compared to those measured at 450 degrees C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.
|
|
| 6. |
- Anheden, Marie, et al.
(författare)
-
Value chain for production of bio-oil from kraft lignin for use as bio-jet fuel
- 2017
-
Ingår i: The 7th Nordic Wood Biorefinery Conference held in Stockholm, Sweden, 28-30 Mar. 2017. - Stockholm : RISE Bioekonomi. - 9789186018207 ; , s. 104-109
-
Konferensbidrag (refereegranskat)abstract
- The LignoJet project aimed to achieve an intermediate lignin-oil product miscible with fossil feedstock and with a significantly reduced oxygen content. A technical concept for production has been studied that involves combined catalysed depolymerisation and hydrodeoxygenation, so called hydrogenolytic depolymerisation, of kraft lignin. Kraft lignin was separated through membrane ultrafiltration from softwood and eucalyptus black liquor followed by precipitation through LignoBoost technology. A difference in lignin properties was observed between ultrafiltration of softwood and eucalyptus black liquor through 15 and 150kDa ceramic membranes. Lignin-oils with similar oxygen content were produced regardless of origin and fractionation technique. A lignin-oil with favourable properties as precursor for refinery integration for jet fuel production as produced in small-scale batch experiments using nickel-based catalyst. Stable pumpable oils with melting point of less than 25-50 deg C and with 20-30% lower oxygen content and aromatic content were obtained that would be suitable as jet fuel precursors. The estimated production cost was found to be competitive with that of other liquid biofuels, while additional revenues could potentially be achieved by also producing chemical and materials from suitable fractions of the lignin-oil.
|
|
| 7. |
- Bloom, Erica, et al.
(författare)
-
Determination of mold and mycotoxins in building materials and house dust using mass spectrometry
- 2009
-
Ingår i: 9th International Conference and Exhibition - Healthy Buildings 2009, HB 2009.
-
Tidskriftsartikel (refereegranskat)abstract
- Mycotoxins are toxic secondary metabolites frequently produced by molds in waterdamaged indoor environments. The objectives of this work were to characterize the mycoflora (by microscopy and culture) and to study the prevalence of selected mycotoxins and levels of fungal biomass (by gas chromatography- and high pressure liquid chromatography tandem mass spectrometry) in samples collected by building inspectors from water-damaged indoor environments in Sweden during a one-year period. Sixty-six percent of the analyzed building materials (n=100), 11% of the settled dust samples (n=18), and 51% of the cultured dust samples (n=37) were positive for at least one of the studied mycotoxins. Except in the case of gliotoxin, mycotoxin-positive building material samples contained 2-6 times more ergosterol than mycotoxin-negative samples. The study result shows that the majority of molds contaminating indoor materials in Swedish water-damaged buildings produce mycotoxins, and that mycotoxin-containing particles settle on surfaces above floor level in these environments.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Grip, Carl-Erik, et al.
(författare)
-
Process integration. Tests and application of different tools on an integrated steelmaking site
- 2013
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311 .- 1873-5606. ; 53:2, s. 366-372
-
Tidskriftsartikel (refereegranskat)abstract
- The energy network in Lulea consists of the steel plant, heat and power production and district heating. Global system studies are necessary to avoid sub-optimization and to deliver energy and/or material efficiency. SSAB began work with global simulation models in 1978. After that several more specialized process integration tools have been tested and used: Mathematical programming using an MILP method, exergy analysis and Pinch analysis. Experiences and examples of results with the different methods are given and discussed. Mathematical programming has been useful to study problems involving the total system with streams of different types of energy and material and reaction between them. Exergy is useful to describe energy problems involving different types of energy, e.g. systematic analysis of rest energies. Pinch analysis has been used especially on local systems with streams of heat energy and heat exchange between them.
|
|
