| 1. |
- Li, Cheng, et al.
(författare)
-
Optimal Planning of Community Integrated Energy Station Considering Frequency Regulation Service
- 2021
-
Ingår i: Journal of Modern Power Systems and Clean Energy. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 2196-5625 .- 2196-5420. ; 9:2, s. 264-273
-
Tidskriftsartikel (refereegranskat)abstract
- With the extensive integration of high-penetration renewable energy resources, more fast-response frequency regulation (FR) providers are required to eliminate the impact of uncertainties from loads and distributed generators (DGs) on system security and stability. As a high-quality FR resource, community integrated energy station (CIES) can effectively respond to frequency deviation caused by renewable energy generation, helping to solve the frequency problem of power system. This paper proposes an optimal planning model of CIES considering FR service. First, the model of FR service is established to unify the time scale of FR service and economic operation. Then, an optimal planning model of CIES considering FR service is proposed, with which the revenue of participating in the FR service is obtained under market mechanism. The flexible electricity pricing model is introduced to flatten the peak tie-line power of CIES. Case studies are conducted to analyze the annual cost and the revenue of CIES participating in FR service, which suggest that providing ancillary services can bring potential revenue.
|
|
| 2. |
- Pecunia, Vincenzo, et al.
(författare)
-
Roadmap on energy harvesting materials
- 2023
-
Ingår i: Journal of Physics. - : IOP Publishing. - 2515-7639. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere.
|
|
| 3. |
- Ding, Yang, et al.
(författare)
-
Artificial intelligence-assisted point-of-care testing system for ultrafast and quantitative detection of drug-resistant bacteria
- 2024
-
Ingår i: SMARTMAT. - : WILEY. - 2766-8525. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- As one of the major causes of antimicrobial resistance, beta-lactamase develops rapidly among bacteria. Detection of beta-lactamase in an efficient and low-cost point-of-care testing (POCT) way is urgently needed. However, due to the volatile environmental factors, the quantitative measurement of current POCT is often inaccurate. Herein, we demonstrate an artificial intelligence (AI)-assisted mobile health system that consists of a paper-based beta-lactamase fluorogenic probe analytical device and a smartphone-based AI cloud. An ultrafast broad-spectrum fluorogenic probe (B1) that could respond to beta-lactamase within 20 s was first synthesized, and the detection limit was determined to be 0.13 nmol/L. Meanwhile, a three-dimensional microfluidic paper-based analytical device was fabricated for integration of B1. Also, a smartphone-based AI cloud was developed to correct errors automatically and output results intelligently. This smart system could calibrate the temperature and pH in the beta-lactamase level detection in complex samples and mice infected with various bacteria, which shows the problem-solving ability in interdisciplinary research, and demonstrates potential clinical benefits.
|
|
| 4. |
- Huang, Zi-Nan, et al.
(författare)
-
Analysis of the stress field in the reactor vessel of the China Initiative Accelerator Driven System during postulated ULOF and UTOP transients
- 2023
-
Ingår i: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 194
-
Tidskriftsartikel (refereegranskat)abstract
- The China Initiative Accelerator Driven System (CiADS) was proposed by China Academy of Science since 2015. The subcritical reactor in CiADS is a liquid Lead Bismuth Eutectic (LBE) cooled fast reactor. When the reactor core is in operation, the LBE coolant will directly contact and corrode the inner surface of reactor vessel. Due to the high temperature, the corrosion will be more severe. If the stress on the reactor vessel exceeds the limit, the plastic deformation will occur, leading to the generation and expansion of defects and cracks, and the safety of the reactor will be affected. Therefore, evaluating the stress field of the reactor vessel under different operating conditions is a very important research project. In this paper, the finite element analysis software ADINA was applied to analyze the reactor vessel in CiADS, and the ASME Code was used as stress assessment standards. We can preliminarily prove that the stress assessments of the vessel during the postulated Unprotected Loss of Flow (ULOF) accidents satisfy the requirements of ASME Code. The limit reactivity insertion to protect the vessel from plastic deformation is 0.58$ in the postulated Unprotected Transient over Power (UTOP) accidents based on our current results. Therefore, we can preliminarily conclude that the current material selection and structural design of the reactor vessel in CiADS could survive most of the postulated transient accidents considering the stress effect.
|
|
| 5. |
- Li, Houpei, et al.
(författare)
-
Matching characteristics and AC performance of the photovoltaic-driven air conditioning system
- 2023
-
Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 264
-
Tidskriftsartikel (refereegranskat)abstract
- Photovoltaic-driven Air Conditioning systems (PVAC) use local electricity generated by distributed Photovoltaic (PV) to drive Air Conditioners (AC). Both the AC cooling load and the PV electricity generation are affected by solar radiation. The PV generation cannot dynamically supply the AC power consumption during the operation. In this study, the matching characteristics of a PVAC were investigated using a case in a 207.34 m2 office room. A coupled simulation model was built, which integrated with a building model, a PV calculation model, an AC model, and a control strategy. More specifically, the AC was modeled with two heat exchangers, a compressor, and a throttling device. Both the building and the PV were simulated in EnergyPlus. The AC compressor speed was controlled so the AC power consumption could match the PV generation when the indoor temperature was within the temperature control zone. The daily matching characteristics of PVAC were strongly affected by the PV capacity. The results showed that the PV factor (PVF) should be set to 1 in order to match the AC and PV power and maximize the AC efficiency. A battery factor of at least 0.7 could ensure the grid flexibility. Finally, the optimized design of PV, battery, and AC capacities was suggested.
|
|
| 6. |
- Xiong, Wenjuan, et al.
(författare)
-
SiNx films and membranes for photonic and MEMS applications
- 2020
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 31, s. 90-97
-
Tidskriftsartikel (refereegranskat)abstract
- This work presents a novel process to form SiN x films and process for membranes with excellent mechanical properties for micro-electro-mechanical systems application as well as integration as IR waveguide for photonic application. The SiN x films were fabricated in SiNgen apparatus which is a single wafer chamber equipment compared to conventional low pressure chemical vapor deposition furnace process. The films showed low stress, good mechanical properties, but the synthesis also eradicates the issues of particle contamination. Through optimizing of the growth parameters and post annealing profile, low stress (40 Mpa) SiN x film could be finally deposited when annealing temperature rose up to 1150 °C. The stress relaxation is a result of more Si nano-crystalline which was formed during annealing, according to the FTIR results. The mechanical properties, Young’s modulus and hardness, were 210 Gpa and 20 Gpa respectively. For the waveguide application, a stack of three layers, SiO 2 /SiN x /SiO 2 was formed where the optimized layer thicknesses were used for minimum optical loss according to simulation feedback. After deposition of the first two layers in the stack, the samples were annealed in range of 900–1150 °C in order to release the stress. Chemical mechanical polish technique was applied to planarize the nitride layer prior to the oxide cladding layer. Such wafers can be used to bond to Si or Ge to manufacture advanced substrates.
|
|
| 7. |
- Su, Wenyan, et al.
(författare)
-
13.4 % Efficiency from All-Small-Molecule Organic Solar Cells Based on a Crystalline Donor with Chlorine and Trialkylsilyl Substitutions
- 2021
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 14:17, s. 3535-3543
-
Tidskriftsartikel (refereegranskat)abstract
- How to simultaneously achieve both high open-circuit voltage (Voc) and high short-circuit current density (Jsc) is a big challenge for realising high power conversion efficiency (PCE) in all-small-molecule organic solar cells (all-SM OSCs). Herein, a novel small molecule (SM)-donor, namely FYSM−SiCl, with trialkylsilyl and chlorine substitutions was designed and synthesized. Compared to the original SM-donor FYSM−H, FYSM−Si with trialkylsilyl substitution showed a decreased crystallinity and lower highest occupied molecular orbital (HOMO) level, while FYSM−SiCl had an improved crystallinity, more ordered packing arrangement, significantly lower HOMO level, and predominant “face-on” orientation. Matched with a SM-acceptor Y6, the FYSM−SiCl-based all-SM OSCs exhibited both high Voc of 0.85 V and high Jsc of 23.7 mA cm−2, which is rare for all-SM OSCs and could be attributed to the low HOMO level of FYSM−SiCl donor and the delicate balance between high crystallinity and suitable blend morphology. As a result, FYSM−SiCl achieved a high PCE of 13.4 % in all-SM OSCs, which was much higher than those of the FYSM−H- (10.9 %) and FYSM−Si-based devices (12.2 %). This work demonstrated a promising method for the design of efficient SM-donors by a side-chain engineering strategy via the introduction of trialkylsilyl and chlorine substitutions.
|
|
| 8. |
- Sun, Xiaoyu, et al.
(författare)
-
Revealing microstructural degradation mechanism induced by interdiffusion between Amdry365 coating and IN792 superalloy
- 2024
-
Ingår i: Materials and Design. - : ELSEVIER SCI LTD. - 1873-4197 .- 0264-1275. ; 241
-
Tidskriftsartikel (refereegranskat)abstract
- Metallic coatings are widely employed to improve the oxidation resistance of superalloys. However, the interdiffusion between the metallic coatings and the superalloys leads to microstructural degradation in both. Some of the underlying degradation mechanisms are still elusive, e.g., the γ′ (Ni3Al) phase depletion in superalloys, where a large amount of γ′ precipitates are dissolved in the γ matrix even though the incoming Al from coatings indeed increases the Al content. Here, we investigated the interdiffusion behavior between the Amdry365 coating and the IN792 superalloy at 1100 °C, using multiple microscopic techniques and thermodynamics calculations. Our results showed an excellent agreement between experiments and thermodynamics simulations, indicating the dominant role of Al on the initial diffusion-induced phase transitions. We proposed the Al-Cr interference effect to account for the pile-up behavior of Cr and the reduced Al content near the coating/superalloy interface. The local phase equilibrium calculations revealed that the γ′ depletion in the superalloy is primarily attributed to the loss of γ′-forming elements, such as Ta and Ti. Our findings opened up an avenue for studies on the superalloy/coating interdiffusion, contributing to reducing this damaging impact.
|
|
| 9. |
- Chi, Chaodan, et al.
(författare)
-
Si-based InGaAs photodetectors on heterogeneous integrated substrate
- 2021
-
Ingår i: Science China: Physics, Mechanics and Astronomy. - : Springer Science and Business Media LLC. - 1674-7348 .- 1869-1927. ; 64:6
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, InGaAs p-i-n photodetectors (PDs) on an InP/SiO2/Si (InPOI) substrate fabricated by ion-slicing technology are demonstrated and compared with the identical device on a commercial InP substrate. The quality of epitaxial layers on the InPOI substrate is similar to that on the InP substrate. The photo responsivities of both devices measured at 1.55 µm are comparable, which are about 0.808–0.828 A W−1. Although the dark current of PD on the InPOI substrate is twice as high as that of PD on the InP substrate at 300 K, the peak detectivities of both PDs are comparable. In general, the overall performance of the InPOI-based PD is comparable to the InP-based PD, demonstrating that the ion-slicing technology is a promising route to enable the high-quality Si-based InP platform for the full photonic integration on a Si substrate.
|
|
| 10. |
- Li, Kai, et al.
(författare)
-
Metal thermopile infrared detector with vertical graphene
- 2023
-
Ingår i: Wuli Xuebao/Acta Physica Sinica. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 72:3
-
Tidskriftsartikel (refereegranskat)abstract
- Thermopile infrared detector is a kind of detector device mainly composed of thermocouple as the basic unit. Because of its simple principle, no need of cooling equipment, and other advantages, it has been widely used in various fields of production and life. However, the absorption rates of the materials in conventional thermopile devices are poor, and the majority of them are incompatible with microfabrication methods. In this work, a metal thermopile infrared detector with vertical graphene (VG) is designed and fabricated. The VG is grown via plasma enhanced chemical vapor deposition, and retained at the device’s thermal ends to provide the thermopile IR detector’s wideband and high response characteristics. The detector achieves a room temperature responsivity reaching a value as high as 1.53 V/W at 792 nm, which can increase the response results about 28 times and reduce the response time to 0.8 ms compared with the thermopile detector without VG. After systematically measuring the response results, it is finally found that there are three main mechanisms responsible for the response on the composite device. The first one is the response generated by the metal thermopile itself alone. The second one is the response increased eventually by the contribution of VG covered at the metal thermal junction that expands the temperature difference. The last one is the response generated by the temperature gradient existing inside the VG on the surface of the device after the absorption of heat. The portion of each partial response mechanism in the total response is also analyzed, providing a new reference direction for analyzing the response generation mechanism of thermopile detectors with other absorbing materials. The process is compatible with the microfabrication, while the device performance is enhanced and suitable for mass production. Furthermore, by utilizing the surface plasmon resonance to combine VG with metal nanoparticles, the material’ s light absorption is found to be enhanced significantly under the same conditions, and the resulting thermal voltage can be increased to 6 times. The results indicate that VG promises to possess practical applications, in many fields such as photoelectric sensing and power production devices. This technology provides a new method to manufacture high-performance thermopile infrared detectors and other sensor devices.
|
|
