| 1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
Ingår i: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 3. |
- Zhao, Yun, et al.
(författare)
-
Solid Polymer Electrolytes with High Conductivity and Transference Number of Li Ions for Li-Based Rechargeable Batteries
- 2021
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 8:7
-
Forskningsöversikt (refereegranskat)abstract
- Smart electronics and wearable devices require batteries with increased energy density, enhanced safety, and improved mechanical flexibility. However, current state-of-the-art Li-based rechargeable batteries (LBRBs) use highly reactive and flowable liquid electrolytes, severely limiting their ability to meet the above requirements. Therefore, solid polymer electrolytes (SPEs) are introduced to tackle the issues of liquid electrolytes. Nevertheless, due to their low Li+ conductivity and Li+ transference number (LITN) (around 10?5 S cm?1 and 0.5, respectively), SPE-based room temperature LBRBs are still in their early stages of development. This paper reviews the principles of Li+ conduction inside SPEs and the corresponding strategies to improve the Li+ conductivity and LITN of SPEs. Some representative applications of SPEs in high-energy density, safe, and flexible LBRBs are then introduced and prospected.
|
|
| 4. |
- Li, Chenglei, et al.
(författare)
-
Room-temperature direct regeneration of spent LiFePO4 cathode using the external short circuit strategy
- 2023
-
Ingår i: Next Sustainability. - : Elsevier. - 2949-8236. ; 1
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium iron phosphate batteries (LFP), widely used as power sources, are forecasted to reach the terawatt-hour scale, inevitably leading to battery waste and expediating the urgency for effective recycling processes for LFP. The modern recycling methodologies based on material recovery face significant economic, environmental, and energy consumption challenges. This research attempts to resolve these challenges by providing direct cathode regeneration based on the principles of an external short-circuit to replenish lithium lost in the spent cathode with lithiated materials (LiC6, Li metal). Given that most active lithium loss in the cathode is caused by the growth of the solid electrolyte interphase rather than structural damage, restoring the lost lithium can revitalize a spent cathode battery’s electrochemical performance to a near-original state. The lithium loss in LFP cathodes ranging from 20% to 80% was renewed by supplementing lithium. Relithiation of 10Ah commercial LFP spent cathode showed revitalized electrochemical performance. Compared to the modern recycling methods, direct cathode regeneration improves the economic benefits of recycling by 33%, decreases energy consumption by 48%, and reduces carbon emissions by 62%. Direct cathode regeneration provides a scaffold for the next generation of recycling methods to improve recycling efficiency while reducing their environmental footprint.
|
|
| 5. |
- Fan, Qunping, 1989, et al.
(författare)
-
Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms
- 2020
-
Ingår i: Joule. - : Elsevier BV. - 2542-4351. ; 4:3, s. 658-672
-
Tidskriftsartikel (refereegranskat)abstract
- We developed three narrow band-gap polymer acceptors PF2-DTC, PF2-DTSi, and PF2-DTGe with different bridging atoms (i.e., C, Si, and Ge). Studies found that such different bridging atoms significantly affect the crystallinity, extinction coefficient, electron mobility of the polymer acceptors, and the morphology and mechanical robustness of related active layers. In all-polymer solar cells (all-PSCs), these polymer acceptors achieved high power conversion efficiencies (PCEs) over 8.0%, while PF2-DTSi obtained the highest PCE of 10.77% due to its improved exciton dissociation, charge transport, and optimized morphology. Moreover, the PF2-DTSi-based active layer showed excellent mechanical robustness with a high toughness value of 9.3 MJ m−3 and a large elongation at a break of 8.6%, which is a great advantage for the practical applications of flexible devices. As a result, the PF2-DTSi-based flexible all-PSC retained >90% of its initial PCE (6.37%) after bending and relaxing 1,200 times at a bending radius of ∼4 mm.
|
|
| 6. |
- You, Xiaohu, et al.
(författare)
-
Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts
- 2021
-
Ingår i: Science China Information Sciences. - : Science Press. - 1674-733X .- 1869-1919. ; 64:1
-
Forskningsöversikt (refereegranskat)abstract
- The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.
|
|
| 7. |
- Zhang, Zhao Yang, et al.
(författare)
-
Photochemical Phase Transitions Enable Coharvesting of Photon Energy and Ambient Heat for Energetic Molecular Solar Thermal Batteries That Upgrade Thermal Energy
- 2020
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 142:28, s. 12256-12264
-
Tidskriftsartikel (refereegranskat)abstract
- Discovering physicochemical principles for simultaneous harvesting of multiform energy from the environment will advance current sustainable energy technologies. Here we explore photochemical phase transitions - a photochemistry-thermophysics coupled regime - for coharvesting of solar and thermal energy. In particular, we show that photon energy and ambient heat can be stored together and released on demand as high-temperature heat, enabled by room-temperature photochemical crystal↔liquid transitions of engineered molecular photoswitches. Integrating the two forms of energy in single-component molecular materials is capable of providing energy capacity beyond that of traditional solar or thermal energy storage systems based solely on molecular photoisomerization or phase change, respectively. Significantly, the ambient heat that is harvested during photochemical melting into liquid of the low-melting-point, metastable isomer can be released as high-temperature heat by recrystallization of the high-melting-point, parent isomer. This reveals that photon energy drives the upgrading of thermal energy in such a hybrid energy system. Rationally designed small-molecule azo switches achieve high gravimetric energy densities of 0.3-0.4 MJ/kg with long-term storage stability. Rechargeable solar thermal battery devices are fabricated, which upon light triggering provide gravimetric power density of about 2.7 kW/kg and temperature increases of >20 °C in ambient environment. We further show their use as deicing coatings. Our work demonstrates a new concept of energy utilization - combining solar energy and low-grade heat into higher-grade heat - which unlocks the possibility of developing sustainable energy systems powered by a combination of natural sunlight and ambient heat.
|
|
| 8. |
- Guo, Yong, et al.
(författare)
-
Deposition of droplets from the trachea or bronchus in the respiratory tract during exhalation : A steady-state numerical investigation
- 2020
-
Ingår i: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 54:8, s. 869-879
-
Tidskriftsartikel (refereegranskat)abstract
- Respiratory droplets are bioaerosols that originate from the respiratory tract. Knowing their deposition characteristics during exhalation would facilitate the understanding of the source of large respiratory droplets and their importance in the spread of respiratory infectious diseases. In this study, computational fluid dynamics is used to simulate the motion and deposition of droplets released from either trachea or bronchi in a realistic reconstruction of the human respiratory tract. Influences of airflow structures and locations of droplet generation on droplet deposition are studied, and droplets with diameters between 1 and 50 mu m are examined. The deposition of droplets is found to be influenced mainly by the droplet diameter and the flow rate of exhalation. The number of droplets released from the trachea or bronchi that can escape into the environment decreases as the flow rate increases. When the flow rate is low (10 L/min), the critical diameter of droplets generated in the lower respiratory system that can escape into the air is approximately 12 mu m, but this diameter is approximately 5 mu m when the flow rate is medium (30 to 60 L/min) or large (90 L/min). The larynx is the dominant site of deposition for droplets smaller than the critical diameter, while trachea and bronchus are more important locations that account for the deposition of larger droplets. This study indicates that the lower respiratory tract is an important source of fine droplets (<5 mu m) in indoor environments, and larger droplets probably originate from the upper respiratory tract, which needs further investigation. Copyright
|
|
| 9. |
- Bai, Fan, et al.
(författare)
-
Application of similarity theory in modeling the output characteristics of proton exchange membrane fuel cell
- 2021
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 46:74, s. 36940-36953
-
Tidskriftsartikel (refereegranskat)abstract
- Proton Exchange Membrane Fuel Cell (PEMFC) has attracted widespread interest. In the present work, similarity analysis is adopted for a three-dimensional single-phase isothermal model of PEMFC to derive similarity criteria. Seven kinds of input criteria (Pi(1) similar to Pi(7)) are obtained, relevant to the fluid flow, pressure drop, flow resistance in a porous medium, activity loss, diffusion mass transfer, convective mass transfer and ohmic loss in PEMFC respectively. Dimensionless voltage and dimensionless current density are defined as two output criteria. Numerical verifications show that if the seven criteria keep their individual values with their components vary in a wide range, the dimensionless polarization curves keep the same with a deviation about 1%, showing the validity and feasibility of the present analysis. From the effect on the dimensionless polarization curve, sensibility analysis shows that the seven criteria can be divided into three categories: strong (Pi(4) and Pi(7), -94.9% similar to +349.2%), mild to minor (Pi(5) and Pi(6), -4.5% similar to +5.0%), and negligible (Pi(1), Pi(2) and Pi(3), -1.2% similar to +1.1%). The similarity analysis approach can greatly save computation time in modeling the output characteristics of PEMFC. (C) 2021 Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.
|
|
| 10. |
- Huang, He, et al.
(författare)
-
Material informatics for uranium-bearing equiatomic disordered solid solution alloys
- 2021
-
Ingår i: Materials Today Communications. - : Elsevier BV. - 2352-4928. ; 29
-
Tidskriftsartikel (refereegranskat)abstract
- Near-equiatomic, multi-component alloys with disordered solid solution phase (DSSP) are associated with outstanding performance in phase stability, mechanical properties and irradiation resistance, and may provide a feasible solution for developing novel uranium-based alloys with better fuel capacity. In this work, we build a machine learning (ML) model of disordered solid solution alloys (DSSAs) based on about 6000 known multicomponent alloys and several materials descriptors to efficiently predict the DSSAs formation ability. To fully optimize the ML model, we develop a multi-algorithm cross-verification approach in combination with the SHapley Additive exPlanations value (SHAP value). We find that the Delta S-C, Lambda, Phi(s), gamma and 1/Omega, corresponding to the former two Hume - Rothery (H - R) rules, are the most important materials descriptors affecting DSSAs formation ability. When the ML model is applied to the 375 uranium-bearing DSSAs, 190 of them are predicted to be the DSSAs never known before. 20 of these alloys were randomly synthesized and characterized. Our predictions are in-line with experiments with 3 inconsistent cases, suggesting that our strategy offers a fast and accurate way to predict novel multi-component alloys with high DSSAs formation ability. These findings shed considerable light on the mapping between the material descriptors and DSSAs formation ability.
|
|
