| 1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
|
|
| 3. |
- Lu, R.S., et al.
(författare)
-
A ring-like accretion structure in M87 connecting its black hole and jet
- 2023
-
Ingår i: Nature. - 0028-0836 .- 1476-4687. ; 616:7958, s. 686-690
-
Tidskriftsartikel (refereegranskat)abstract
- The nearby radio galaxy M87 is a prime target for studying black hole accretion and jet formation1,2. Event Horizon Telescope observations of M87 in 2017, at a wavelength of 1.3 mm, revealed a ring-like structure, which was interpreted as gravitationally lensed emission around a central black hole3. Here we report images of M87 obtained in 2018, at a wavelength of 3.5 mm, showing that the compact radio core is spatially resolved. High-resolution imaging shows a ring-like structure of [Formula: see text] Schwarzschild radii in diameter, approximately 50% larger than that seen at 1.3 mm. The outer edge at 3.5 mm is also larger than that at 1.3 mm. This larger and thicker ring indicates a substantial contribution from the accretion flow with absorption effects, in addition to the gravitationally lensed ring-like emission. The images show that the edge-brightened jet connects to the accretion flow of the black hole. Close to the black hole, the emission profile of the jet-launching region is wider than the expected profile of a black-hole-driven jet, suggesting the possible presence of a wind associated with the accretion flow.
|
|
| 4. |
- Lei, Yu, et al.
(författare)
-
Graphene and Beyond: Recent Advances in Two-Dimensional Materials Synthesis, Properties, and Devices
- 2022
-
Ingår i: ACS Nanoscience Au. - : American Chemical Society (ACS). - 2694-2496. ; 2:6, s. 450-485
-
Forskningsöversikt (refereegranskat)abstract
- Since the isolation of graphene in 2004, two-dimensional (2D) materials research has rapidly evolved into an entire subdiscipline in the physical sciences with a wide range of emergent applications. The unique 2D structure offers an open canvas to tailor and functionalize 2D materials through layer number, defects, morphology, moiré pattern, strain, and other control knobs. Through this review, we aim to highlight the most recent discoveries in the following topics: theory-guided synthesis for enhanced control of 2D morphologies, quality, yield, as well as insights toward novel 2D materials; defect engineering to control and understand the role of various defects, including in situ and ex situ methods; and properties and applications that are related to moiré engineering, strain engineering, and artificial intelligence. Finally, we also provide our perspective on the challenges and opportunities in this fascinating field.
|
|
| 5. |
|
|
| 6. |
- Das, Oisik, et al.
(författare)
-
The Effect of Carbon Black on the Properties of Plasticised Wheat Gluten Biopolymer
- 2020
-
Ingår i: Molecules. - : MDPI. - 1431-5157 .- 1420-3049. ; 25:10
-
Tidskriftsartikel (refereegranskat)abstract
- Wheat gluten biopolymers generally become excessively rigid when processed without plasticisers, while the use of plasticisers, on the other hand, can deteriorate their mechanical properties. As such, this study investigated the effect of carbon black (CB) as a filler into glycerol-plasticised gluten to prepare gluten/CB biocomposites in order to eliminate the aforementioned drawback. Thus, biocomposites were manufactured using compression moulding followed by the determination of their mechanical, morphological, and chemical properties. The filler content of 4 wt% was found to be optimal for achieving increased tensile strength by 24%, and tensile modulus by 268% along with the toughness retention based on energy at break when compared with those of glycerol-plasticised gluten. When reaching the filler content up to 6 wt%, the tensile properties were found to be worsened, which can be ascribed to excessive agglomeration of carbon black at the high content levels within gluten matrices. Based on infrared spectroscopy, the results demonstrate an increased amount of β-sheets, suggesting the formation of more aggregated protein networks induced by increasing the filler contents. However, the addition of fillers did not improve fire and water resistance in such bionanocomposites owing to the high blend ratio of plasticiser to gluten.
|
|
| 7. |
- DeCarolis, Joseph, et al.
(författare)
-
Leveraging Open-Source Tools for Collaborative Macro-energy System Modeling Efforts
- 2020
-
Ingår i: Joule. - : Elsevier BV. - 2542-4351. ; 4:12, s. 2523-2526
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The authors are founding team members of a new effort to develop an Open Energy Outlook for the United States. The effort aims to apply best practices of policy-focused energy system modeling, ensure transparency, build a networked community, and work toward a common purpose: examining possible US energy system futures to inform energy and climate policy efforts. Individual author biographies can be found on the project website: https://openenergyoutlook.org/. DeCarolis et al. articulate the benefits of forming collaborative teams with a wide array of disciplinary and domain expertise to conduct analysis with macro-energy system models. Open-source models, tools, and datasets underpin such efforts by enabling transparency, accessibility, and replicability among team members and with the broader modeling community.
|
|
| 8. |
- Strandberg, Gustav, 1977-, et al.
(författare)
-
Bespoke climate indicators for the Swedish energy sector − a stakeholder focused approach
- 2024
-
Ingår i: Climate Services. - Göteborg : IVL Svenska Miljöinstitutet. - 2405-8807. ; 34, s. 100486-100486
-
Tidskriftsartikel (refereegranskat)abstract
- Climate change concerns the energy sector to a high degree because the sector is sensitive both to changing conditions for power and heat production, and to changing demand for electricity, heating and cooling. In this study potential consequences of climate change on different parts of the Swedish energy sector were assessed in a series of workshops, where climate and energy scientists, energy systems experts and analysts met with representativesof the energy sector to assess the vulnerability of the sector and consider what climate indicators could be used to assess impacts of relevance. The impact of climate change depends on the energy type. Hydropower, for which production is naturally linked to weather and climate, is significantly impacted by climate change. For other forms of production, such as nuclear power, other factors such as e.g. policy and technology development are more important. The series of workshops held in this study, where different aspects of climate change and consequences were discussed, proved very successful and has increased our understanding of climate impacts on the energy system.
|
|
| 9. |
- Xu, C L, et al.
(författare)
-
Impact of local Si segregation on strain localization in ductile cast iron
- 2020
-
Ingår i: IOP Conference Series: Materials Science and Engineering. - : Institute of Physics Publishing (IOPP).
-
Konferensbidrag (refereegranskat)abstract
- The distribution of Si content in tensile deformed ductile cast iron has been characterized using electron microscopy and correlated to the strain distribution determined based on 3D tomography data collected before and after tensile deformation and digital volume correlation analysis. The results show that the high plastic strain regions localize in bands consisting of large graphite nodules and deformed matrix with high Si content connecting the graphite nodules in the first-to-solidify regions. The bands are aligned about 45° with respect to the loading direction, which is close to the maximum shear direction.
|
|
| 10. |
- Biollaz, S., et al.
(författare)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 1
- 2018
-
Rapport (refereegranskat)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). In practice, a trade-off between reliability, accuracy and cost has to be reached when selecting the proper analysis technique for a specific application. The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to(biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. The report is composed of a set of 2 documents. Document 1(the present report) describes the available analysis techniques (both commercial and underdevelopment) for the measurement of different compounds of interest present in gasification gas. The objective is to help the reader to properly select the analysis technique most suitable to the target compounds and the intended application. Document 1 also describes some examples of application of gas analysis at commercial-, pilot- and research gasification plants, as well as examples of recent and current joint research activities in the field. The information contained in Document 1 is complemented with a book of factsheets on gas analysis techniques in Document 2, and a collection of video blogs which illustrate some of the analysis techniques described in Documents 1 and 2.This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
