SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Lindahl Anders 1954 ) ;lar1:(cth)"

Sökning: WFRF:(Lindahl Anders 1954 ) > Chalmers tekniska högskola

  • Resultat 1-10 av 13
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Apelgren, Peter, et al. (författare)
  • Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo.
  • 2017
  • Ingår i: PloS one. - : Public Library of Science (PLoS). - 1932-6203. ; 12:12
  • Tidskriftsartikel (refereegranskat)abstract
    • Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.
  •  
2.
  • Apelgren, Peter, et al. (författare)
  • Vascularization of tissue engineered cartilage-Sequential in vivo MRI display functional blood circulation
  • 2021
  • Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 276
  • Tidskriftsartikel (refereegranskat)abstract
    • Establishing functional circulation in bioengineered tissue after implantation is vital for the delivery of oxygen and nutrients to the cells. Native cartilage is avascular and thrives on diffusion, which in turn depends on proximity to circulation. Here, we investigate whether a gridded three-dimensional (3D) bioprinted construct would allow ingrowth of blood vessels and thus prove a functional concept for vascularization of bioengineered tissue. Twenty 10 x 10 x 3-mm 3Dbioprinted nanocellulose constructs containing human nasal chondrocytes or cell-free controls were subcutaneously implanted in 20 nude mice. Over the next 3 months, the mice were sequentially imaged with a 7 T small-animal MRI system, and the diffusion and perfusion parameters were analyzed. The chondrocytes survived and proliferated, and the shape of the constructs was well preserved. The diffusion coefficient was high and well preserved over time. The perfusion and diffusion patterns shown by MRI suggested that blood vessels develop over time in the 3D bioprinted constructs; the vessels were confirmed by histology and immunohistochemistry. We conclude that 3D bioprinted tissue with a gridded structure allows ingrowth of blood vessels and has the potential to be vascularized from the host. This is an essential step to take bioengineered tissue from the bench to clinical practice.
  •  
3.
  • Concaro, Sebastian, et al. (författare)
  • Effect of cell seeding concentration on the quality of tissue engineered constructs loaded with adult human articular chondrocytes.
  • 2008
  • Ingår i: Journal of tissue engineering and regenerative medicine. - : Hindawi Limited. - 1932-6254 .- 1932-7005. ; 2:1, s. 14-21
  • Tidskriftsartikel (refereegranskat)abstract
    • Many aspects of the process of in vitro differentiation of chondrocytes in three-dimensional (3D) scaffolds need to be further investigated. Chitosan scaffolds were produced by freeze-drying 3% w/v 90% DDA chitosan gels. The effect of the cell seeding concentration was evaluated by culturing human adult chondrocytes in chitosan scaffolds After the first passage, cells were seeded into chitosan scaffolds with a diameter of 8 mm. The final cell seeding concentration per cm3 of chitosan scaffold was: Group A, 3 x 10(6); Group B, 6 x 10(6); Group C, 12 x 10(6); and Group D, 25 x 10(6) cells. After 14 and 28 days in 3D culture, the constructs were assesed for collagen, glucosaminoglycans and DNA content. The mechanical properties of the constructs were determined using a dynamic oscillatory shear test. The histological aspect of the constructs was evaluated using the Bern score. The collagen and GAG concentration increased, varying the cell seeding concentration. There was a significant increase in proteoglycan and hydroxyproline production between groups C and D. The sulphated GAG content increased significantly in the group D as compared to the other groups. The mechanical properties of the different constructs increased over time, from 9.6 G'/kPa at 14 days of 3D culture to 14.6 G'/kPa at 28 days under the same culture conditions. In this study we were able to determine that concentrations of 12-25 million cells/cm2 are needed to increase the matrix production and mechanical properties of human adult chondrocytes under static conditions.
  •  
4.
  • Hildner, Florian, et al. (författare)
  • Human adipose-derived stem cells contribute to chondrogenesis in coculture with human articular chondrocytes.
  • 2009
  • Ingår i: Tissue engineering. Part A. - : Mary Ann Liebert Inc. - 1937-335X .- 1937-3341. ; 15:12, s. 3961-9
  • Tidskriftsartikel (refereegranskat)abstract
    • Adipose tissue is easily available and contains high numbers of stem cells that are capable for chondrogenic differentiation. We hypothesize that a partial substitution of chondrocytes with autologous adipose-derived stem cells (ASC) might be a possible strategy to reduce the number of chondrocytes needed in matrix-associated autologous chondrocyte transplantation. To lay the ground, in vitro coculture experiments were performed using human chondrocytes and human ASC. Chondrocytes were obtained from donors undergoing matrix-associated autologous chondrocyte transplantation. ASC were isolated from liposuction material. Chondrocytes and ASC were seeded either in fibrin (Tisseel; Baxter, Vienna, Austria) or collagen matrix (Tissue Fleece; Baxter, Unterschleissheim, Germany). RNA for quantitative reverse transcriptase (RT)-polymerase chain reaction was isolated after 2 weeks of culture in chondrogenic medium, and after 4 weeks samples were processed for histology. Related to the number of chondrocytes used, coculture with ASC led to strong increase in collagen type IX mRNA expression, which is an indicator for long-term stability of cartilage. Moderate upregulation was shown for SOX9, aggrecan, melanoma inhibitory activity, cartilage link protein 1, and cartilage oligomeric matrix protein mRNA. However, expression of collagen I and collagen II indicates the synthesis of fibrous tissue, which might be due to the use of dedifferentiated chondrocytes. Tisseel provided slightly better chondrogenic conditions than Tissue Fleece. These data support the possibility to take advantage of ASC in cartilage regeneration in conjunction with autologous chondrocytes.
  •  
5.
  • Karlsson, Camilla, 1977, et al. (författare)
  • Neither Notch1 expression nor cellular size correlate with mesenchymal stem cell properties of adult articular chondrocytes.
  • 2008
  • Ingår i: Cells, tissues, organs. - : S. Karger AG. - 1422-6421 .- 1422-6405. ; 187:4, s. 275-85
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND: Tissue repair is thought to be regulated by progenitor cells, which in other tissues are characterized by their Notch1 expression or small cellular size. Here we studied if these traits affect the chondrogenic potential and are markers for multipotent progenitor cell populations in adult articular cartilage. METHODS: Directly isolated articular chondrocytes were sorted with regard to their Notch1 expression or cellular size. Their colony forming efficiency (CFE) and their potential to differentiate towards adipogenic, osteogenic and chondrogenic lineages were investigated. The different sorted populations were also expanded in monolayer and analyzed in the same manner as the directly isolated cells. RESULTS: No differences in CFE or adipogenic, osteogenic and chondrogenic potentials were detected among the sorted populations. Expanded cells displayed a higher osteochondral potential than directly isolated cells. CONCLUSION: Cellular size or Notch1 expression is not per se a specific marker for mesenchymal progenitor cells in adult articular cartilage. Monolayer-expanded adult chondrocytes contain a larger mesenchymal progenitor cell-like population than directly isolated cells, highly likely as a result of dedifferentiation. If there are resident Notch1-positive cells or cells of a specific size in adult articular cartilage with functional features of progenitor cells, the population consists of only a very small number of cells.
  •  
6.
  • Möller, Thomas, 1986, et al. (författare)
  • In Vivo Chondrogenesis in 3D Bioprinted Human Cell-laden Hydrogel Constructs
  • 2017
  • Ingår i: Plastic and Reconstructive Surgery - Global Open. - 2169-7574 .- 0032-1052 .- 1529-4242. ; 5:2, s. Article no e1227 -
  • Tidskriftsartikel (refereegranskat)abstract
    • Background: The three-dimensional (3D) bioprinting technology allows creation of 3D constructs in a layer-by-layer fashion utilizing biologically relevant materials such as biopolymers and cells. The aim of this study is to investigate the use of 3D bioprinting in a clinically relevant setting to evaluate the potential of this technique for in vivo chondrogenesis. Methods: Thirty-six nude mice (Balb-C, female) received a 5-x 5-x 1-mm piece of bioprinted cell-laden nanofibrillated cellulose/alginate construct in a subcutaneous pocket. Four groups of printed constructs were used: (1) human (male) nasal chondrocytes (hNCs), (2) human (female) bone marrow-derived mesenchymal stem cells (hBMSCs), (3) coculture of hNCs and hBMSCs in a 20/80 ratio, and (4) Cell-free scaffolds (blank). After 14, 30, and 60 days, the scaffolds were harvested for histological, immunohistochemical, and mechanical analysis. Results: The constructs had good mechanical properties and keep their structural integrity after 60 days of implantation. For both the hNC constructs and the cocultured constructs, a gradual increase of glycosaminoglycan production and hNC proliferation was observed. However, the cocultured group showed a more pronounced cell proliferation and enhanced deposition of human collagen II demonstrated by immunohistochemical analysis. Conclusions: In vivo chondrogenesis in a 3D bioprinted human cell-laden hydrogel construct has been demonstrated. The trophic role of the hBMSCs in stimulating hNC proliferation and matrix deposition in the coculture group suggests the potential of 3D bioprinting of human cartilage for future application in reconstructive surgery.
  •  
7.
  • Nguyen, Duong, 1986, et al. (författare)
  • Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
  • 2017
  • Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7
  • Tidskriftsartikel (refereegranskat)abstract
    • Cartilage lesions can progress into secondary osteoarthritis and cause severe clinical problems in numerous patients. As a prospective treatment of such lesions, human-derived induced pluripotent stem cells (iPSCs) were shown to be 3D bioprinted into cartilage mimics using a nanofibrillated cellulose (NFC) composite bioink when co-printed with irradiated human chondrocytes. Two bioinks were investigated: NFC with alginate (NFC/A) or hyaluronic acid (NFC/HA). Low proliferation and phenotypic changes away from pluripotency were seen in the case of NFC/HA. However, in the case of the 3D-bioprinted NFC/A (60/40, dry weight % ratio) constructs, pluripotency was initially maintained, and after five weeks, hyaline-like cartilaginous tissue with collagen type II expression and lacking tumorigenic Oct4 expression was observed in 3D -bioprinted NFC/A (60/40, dry weight % relation) constructs. Moreover, a marked increase in cell number within the cartilaginous tissue was detected by 2-photon fluorescence microscopy, indicating the importance of high cell densities in the pursuit of achieving good survival after printing. We conclude that NFC/A bioink is suitable for bioprinting iPSCs to support cartilage production in co-cultures with irradiated chondrocytes.
  •  
8.
  • Nilebäck, Erik, 1984, et al. (författare)
  • Acoustic monitoring of changes in well-defined hyaluronan layers exposed to chondrocytes
  • 2014
  • Ingår i: Analyst. - : Royal Society of Chemistry (RSC). - 0003-2654 .- 1364-5528. ; 139:21, s. 5350-5353
  • Tidskriftsartikel (refereegranskat)abstract
    • The interaction of human-derived chondrocytes and thin hyaluronan layers was studied using the quartz crystal microbalance with dissipation (QCM-D) technique combined with light microscopy. This approach allowed unique real-time monitoring of the interface between the cells and the sensor surface. Our results suggest that the hyaluronan layer is rapidly degraded by chondrocytes.
  •  
9.
  • Stenhamre, Hanna, et al. (författare)
  • Influence of pore size on the redifferentiation potential of human articular chondrocytes in poly(urethane urea) scaffolds
  • 2011
  • Ingår i: Journal of tissue engineering and regenerative medicine. - : Hindawi Limited. - 1932-7005 .- 1932-6254. ; 5:7, s. 578-588
  • Tidskriftsartikel (refereegranskat)abstract
    • The chemical and physical properties of scaffolds affect cellular behaviour, which ultimately determines the performance and outcome of tissue-engineered cartilage constructs. The objective of this study was to assess whether a degradable porous poly(urethane urea) scaffold could be a suitable material for cartilage tissue engineering. We also investigated whether the post-expansion redifferentiation and cartilage tissue formation of in vitro expanded adult human chondrocytes could be regulated by controlled modifications of the scaffold architecture. Scaffolds with different pore sizes, < 150 µm, 150-300 µm and 300-500 µm, were seeded with chondrocytes and subjected to chondrogenic and osteogenic induction in vitro. The poly(urethane urea) scaffold with the smaller pore size enhanced the hyaline-like extracellular matrix and thus neocartilage formation. Conversely, the chondrocytes differentiated to a greater extent into the osteogenic pathway in the scaffold with the larger pore size. In conclusion, our results demonstrate that poly(urethane urea) may be useful as a scaffold material in cartilage tissue engineering. Furthermore, the chondrogenic and the osteogenic differentiation capacity of in vitro expanded human articular chondrocytes can be influenced by the scaffold architecture. By tailoring the pore sizes, the performance of the tissue-engineered cartilage constructs might be influenced and thus also the clinical outcome in the long run.
  •  
10.
  • Stenhamre, Hanna, et al. (författare)
  • Nanosized fibers' effect on adult human articular chondrocytes behavior.
  • 2013
  • Ingår i: Materials science & engineering. C, Materials for biological applications. - : Elsevier BV. - 1873-0191 .- 0928-4931. ; 33:3, s. 1539-1545
  • Tidskriftsartikel (refereegranskat)abstract
    • Tissue engineering with chondrogenic cell based therapies is an expanding field with the intention of treating cartilage defects. It has been suggested that scaffolds used in cartilage tissue engineering influence cellular behavior and thus the long-term clinical outcome. The objective of this study was to assess whether chondrocyte attachment, proliferation and post-expansion re-differentiation could be influenced by the size of the fibers presented to the cells in a scaffold. Polylactic acid (PLA) scaffolds with different fiber morphologies were produced, i.e. microfiber (MS) scaffolds as well as nanofiber-coated microfiber scaffold (NMS). Adult human articular chondrocytes were cultured in the scaffolds in vitro up to 28 days, and the resulting constructs were assessed histologically, immunohistochemically, and biochemically. Attachment of cells and serum proteins to the scaffolds was affected by the architecture. The results point toward nano-patterning onto the microfibers influencing proliferation of the chondrocytes, and the overall 3D environment having a greater influence on the re-differentiation. In the efforts of finding the optimal scaffold for cartilage tissue engineering, studies as the current contribute to the knowledge of how to affect and control chondrocytes behavior.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 13
Typ av publikation
tidskriftsartikel (13)
Typ av innehåll
refereegranskat (13)
Författare/redaktör
Lindahl, Anders, 195 ... (13)
Gatenholm, Paul, 195 ... (8)
Brittberg, Mats, 195 ... (4)
Stenhamre, Hanna (4)
Kölby, Lars, 1963 (3)
Amoroso, Matteo, 198 ... (3)
visa fler...
Apelgren, Peter (3)
Brantsing, Camilla (3)
Sandstedt, Joakim (2)
Rotter, Nicole (2)
Hägg, Daniel, 1974 (2)
Concaro, Sebastian (2)
Enochson, Lars (2)
Strid Orrhult, Linne ... (1)
Liu, Johan, 1960 (1)
Larsson, Anette, 196 ... (1)
Tengvall, Pentti (1)
Bergstrand, Anna, 19 ... (1)
Thomsen, Peter, 1953 (1)
Enejder, Annika, 196 ... (1)
Altgärde, Noomi, 198 ... (1)
Svedhem, Sofia, 1970 (1)
Kunze, Angelika, 197 ... (1)
Nannmark, Ulf, 1958 (1)
Nilebäck, Erik, 1984 (1)
Säljö, Karin, 1981 (1)
Montelius, Mikael, 1 ... (1)
Simonsson, Stina, 19 ... (1)
Karlsson, Camilla, 1 ... (1)
Forsman, Alma, 1979 (1)
Walkenström, Pernill ... (1)
Tallheden, Tommi, 19 ... (1)
Nicklasson, Elin (1)
Ellowsson, Linda (1)
Ekström, Karin, 1978 (1)
Ekholm, Josefine (1)
Fu, Y. F. (1)
Thorfve, Anna, 1982 (1)
van Griensven, Marti ... (1)
Hildner, Florian (1)
Peterbauer, Anja (1)
Wolbank, Susanne (1)
Danzer, Martin (1)
Redl, Heinz (1)
Kalogeropoulos, Theo ... (1)
Nguyen, Duy, 1986 (1)
Petren, C. (1)
Möller, Thomas, 1986 (1)
Nguyen, Duong, 1986 (1)
Nimkingratana, Puwap ... (1)
visa färre...
Lärosäte
Göteborgs universitet (13)
RISE (1)
Språk
Engelska (13)
Forskningsämne (UKÄ/SCB)
Medicin och hälsovetenskap (10)
Teknik (5)
Naturvetenskap (2)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy