| 1. |
|
|
| 2. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Shang, Yuchen, et al.
(författare)
-
Enhancement of short/medium-range order and thermal conductivity in ultrahard sp3 amorphous carbon by C70 precursor
- 2023
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- As an advanced amorphous material, sp3 amorphous carbon exhibits exceptional mechanical, thermal and optical properties, but it cannot be synthesized by using traditional processes such as fast cooling liquid carbon and an efficient strategy to tune its structure and properties is thus lacking. Here we show that the structures and physical properties of sp3 amorphous carbon can be modified by changing the concentration of carbon pentagons and hexagons in the fullerene precursor from the topological transition point of view. A highly transparent, nearly pure sp3−hybridized bulk amorphous carbon, which inherits more hexagonal-diamond structural feature, was synthesized from C70 at high pressure and high temperature. This amorphous carbon shows more hexagonal-diamond-like clusters, stronger short/medium-range structural order, and significantly enhanced thermal conductivity (36.3 ± 2.2 W m−1 K−1) and higher hardness (109.8 ± 5.6 GPa) compared to that synthesized from C60. Our work thus provides a valid strategy to modify the microstructure of amorphous solids for desirable properties.
|
|
| 5. |
- Shang, Yuchen, et al.
(författare)
-
Ultrahard bulk amorphous carbon from collapsed fullerene
- 2021
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 599:7886, s. 599-604
-
Tidskriftsartikel (refereegranskat)abstract
- Amorphous materials inherit short- and medium-range order from the corresponding crystal and thus preserve some of its properties while still exhibiting novel properties1,2. Due to its important applications in technology, amorphous carbon with sp2 or mixed sp2–sp3 hybridization has been explored and prepared3,4, but synthesis of bulk amorphous carbon with sp3 concentration close to 100% remains a challenge. Such materials inherit the short-/medium-range order of diamond and should also inherit its superior properties5. Here, we successfully synthesized millimetre-sized samples—with volumes 103–104 times as large as produced in earlier studies—of transparent, nearly pure sp3 amorphous carbon by heating fullerenes at pressures close to the cage collapse boundary. The material synthesized consists of many randomly oriented clusters with diamond-like short-/medium-range order and possesses the highest hardness (101.9 ± 2.3 GPa), elastic modulus (1,182 ± 40 GPa) and thermal conductivity (26.0 ± 1.3 W m−1 K−1) observed in any known amorphous material. It also exhibits optical bandgaps tunable from 1.85 eV to 2.79 eV. These discoveries contribute to our knowledge about advanced amorphous materials and the synthesis of bulk amorphous materials by high-pressure and high-temperature techniques and may enable new applications for amorphous solids.
|
|
| 6. |
- Zhao, Sen, et al.
(författare)
-
Expanding the mutation and phenotype spectrum of MYH3-associated skeletal disorders
- 2022
-
Ingår i: NPJ genomic medicine. - : Nature Publishing Group. - 2056-7944. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Pathogenic variants in MYH3 cause distal arthrogryposis type 2A and type 2B3 as well as contractures, pterygia and spondylocarpotarsal fusion syndromes types 1A and 1B. These disorders are ultra-rare and their natural course and phenotypic variability are not well described. In this study, we summarize the clinical features and genetic findings of 17 patients from 10 unrelated families with vertebral malformations caused by dominant or recessive pathogenic variants in MYH3. Twelve novel pathogenic variants in MYH3 (NM_002470.4) were identified: three of them were de novo or inherited in autosomal dominant way and nine were inherited in autosomal recessive way. The patients had vertebral segmentation anomalies accompanied with variable joint contractures, short stature and dysmorphic facial features. There was a significant phenotypic overlap between dominant and recessive MYH3-associated conditions regarding the degree of short stature as well as the number of vertebral fusions. All monoallelic variants caused significantly decreased SMAD3 phosphorylation, which is consistent with the previously proposed pathogenic mechanism of impaired canonical TGF-β signaling. Most of the biallelic variants were predicted to be protein-truncating, while one missense variant c.4244T>G,p.(Leu1415Arg), which was inherited in an autosomal recessive way, was found to alter the phosphorylation level of p38, suggesting an inhibition of the non-canonical pathway of TGF-β signaling. In conclusion, the identification of 12 novel pathogenic variants and overlapping phenotypes in 17 affected individuals from 10 unrelated families expands the mutation and phenotype spectrum of MYH3-associated skeletal disorders. We show that disturbances of canonical or non-canonical TGF-β signaling pathways are involved in pathogenesis of MYH3-associated skeletal fusion (MASF) syndrome.
|
|
| 7. |
- An, Rui, et al.
(författare)
-
Photostability and Photodegradation Processes in Colloidal CsPbI3 Perovskite Quantum Dots
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 10:45, s. 39222-39227
-
Tidskriftsartikel (refereegranskat)abstract
- All-inorganic CsPbI3 perovskite quantum dots (QDs) have attracted intense attention for their successful application in photovoltaics (PVs) and optoelectronics that are enabled by their superior absorption capability and great photoluminescence (PL) properties. However, their photostability remains a practical bottleneck and further optimization is highly desirable. Here, we studied the photostability of as-obtained colloidal CsPbI3 QDs suspended in hexane. We found that light illumination does induce photodegradation of CsPbI3 QDs. Steady-state spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and transient absorption spectroscopy verified that light illumination leads to detachment of the capping agent, collapse of the CsPbI3 QD surface, and finally aggregation of surface Pb0. Both dangling bonds containing surface and Pb0 serve as trap states causing PL quenching with a dramatic decrease of PL quantum yield. Our work provides a detailed insight about the correlation between the structural and photophysical consequences of the photodegradation process in CsPbI3 QDs and may lead to the optimization of such QDs toward device applications.
|
|
| 8. |
- Cao, Qi, et al.
(författare)
-
Jointly estimating the most likely driving paths and destination locations with incomplete vehicular trajectory data
- 2023
-
Ingår i: Transportation Research, Part C: Emerging Technologies. - 0968-090X. ; 155
-
Tidskriftsartikel (refereegranskat)abstract
- With an ever-increasing deployment density of probe and fixed sensors, massive vehicular trajectory data is available and show a promising foundation to improve the observability of dynamic traffic demand pattern. However, due to technical and privacy issues, the raw trajectories are not always complete and the paths and destinations between discontinuous trajectory nodes are usually missing. This paper proposes a probabilistic method to jointly reconstruct the missing driving path and destination location of vehicles with incomplete trajectory data. One problem-specific HMM-structured model incorporating spatial and temporal analysis (ST-HMM) is constructed to define the matching probability between observed data and possible movement. Two algorithms, namely candidate set generation and best-match search algorithms, are developed to seek the most possible one as matching result. It can implement end-to-end processing from incomplete trajectory data to complete and connective paths and destinations for the target vehicle. The proposed method is tested based on field-test data and city-wide road network. Compared with two benchmark methods, the proposed method improved the matching accuracy in terms of both path identification and destination inference. Additionally, sensitivity analyses on the size of training dataset and candidate set were performed. We believe that experiment results of these sensitivity analyses can help to provide guidance on data sensing and candidate generation.
|
|
| 9. |
- Diuk-Wasser, Maria A., et al.
(författare)
-
Monitoring Human Babesiosis Emergence through Vector Surveillance, New England, USA
- 2014
-
Ingår i: Emerging Infectious Diseases. - : Centers for Disease Control and Prevention (CDC). - 1080-6040 .- 1080-6059. ; 20:2, s. 225-231
-
Tidskriftsartikel (refereegranskat)abstract
- Human babesiosis is an emerging tick-borne disease caused by the intraerythrocytic protozoan Babesia microti. Its geographic distribution is more limited than that of Lyme disease, despite sharing the same tick vector and reservoir hosts. The geographic range of B. microti is expanding, but knowledge of its range is incomplete and relies exclusively on reports of human cases. We evaluated the utility of tick-based surveillance for monitoring disease expansion by comparing the ratios of the 2 infections in humans and ticks in areas with varying babesiosis endemicity. We found a close association between human disease and tick infection ratios in long-established babesiosis-endemic areas but a lower than expected incidence of human babesiosis on the basis of tick infection rates in new disease-endemic areas. This finding suggests that babesiosis at emerging sites is underreported. Vector-based surveillance can provide an early warning system for the emergence of human babesiosis.
|
|
| 10. |
- Guo, Yuchen, et al.
(författare)
-
Design Applicable 3D Microfluidic Functional Units Using 2D Topology Optimization with Length Scale Constraints
- 2020
-
Ingår i: Micromachines. - : MDPI. - 2072-666X. ; 11:6
-
Tidskriftsartikel (refereegranskat)abstract
- Due to the limits of computational time and computer memory, topology optimization problems involving fluidic flow frequently use simplified 2D models. Extruded versions of the 2D optimized results typically comprise the 3D designs to be fabricated. In practice, the depth of the fabricated flow channels is finite; the limited flow depth together with the no-slip condition potentially make the fluidic performance of the 3D model very different from that of the simplified 2D model. This discrepancy significantly limits the usefulness of performing topology optimization involving fluidic flow in 2D—at least if special care is not taken. Inspired by the electric circuit analogy method, we limit the widths of the microchannels in the 2D optimization process. To reduce the difference of fluidic performance between the 2D model and its 3D counterpart, we propose an applicable 2D optimization model, and ensure the manufacturability of the obtained layout, combinations of several morphology-mimicking filters impose maximum or minimum length scales on the solid phase or the fluidic phase. Two typical Lab-on-chip functional units, Tesla valve and fluidic channel splitter, are used to illustrate the validity of the proposed application of length scale control.
|
|
