| 1. |
- Aamodt, K., et al.
(författare)
-
Alignment of the ALICE Inner Tracking System with cosmic-ray tracks
- 2010
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 5
-
Konferensbidrag (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 mu m in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10(5) charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.
|
|
| 2. |
|
|
| 3. |
- Chen, M., et al.
(författare)
-
A novel diode structure with controlled injection of backside holes (CIBH)
- 2006
-
Konferensbidrag (refereegranskat)abstract
- In this paper we present a novel 3.3kV diode structure with controlled injection of backside holes, i.e. CIBH diode. This new diode structure features buried floating p layers at the cathode side. These p doped areas prevent the formation of high electric field strength at the nn+ junction and accordingly avoid the avalanche generation at the nn+ junction. The CIBH diode concept provides, compared to diodes without p layers and the same design, significantly improved dynamic ruggedness and improved sott reverse recovery at low current densities. Simulations and results of the first fabricated diodes show the readability of this new promising diode concept.
|
|
| 4. |
- de Jong, Roelof S., et al.
(författare)
-
4MOST-4-metre Multi-Object Spectroscopic Telescope
- 2014
-
Ingår i: Ground-based and Airborne Instrumentation for Astronomy V. - : SPIE. - 0277-786X .- 1996-756X. ; 9147
-
Konferensbidrag (refereegranskat)abstract
- 4MOST is a wide-field, high-multiplex spectroscopic survey facility under development for the VISTA telescope of the European Southern Observatory (ESO). Its main science drivers are in the fields of galactic archeology, high-energy physics, galaxy evolution and cosmology. 4MOST will in particular provide the spectroscopic complements to the large area surveys coming from space missions like Gaia, eROSITA, Euclid, and PLATO and from ground-based facilities like VISTA, VST, DES, LSST and SKA. The 4MOST baseline concept features a 2.5 degree diameter field-of-view with similar to 2400 fibres in the focal surface that are configured by a fibre positioner based on the tilting spine principle. The fibres feed two types of spectrographs; similar to 1600 fibres go to two spectrographs with resolution R> 5000 (lambda similar to 390-930 nm) and similar to 800 fibres to a spectrograph with R> 18,000 (lambda similar to 392-437 nm & 515-572 nm & 605-675 nm). Both types of spectrographs are fixed-configuration, three-channel spectrographs. 4MOST will have an unique operations concept in which 5 year public surveys from both the consortium and the ESO community will be combined and observed in parallel during each exposure, resulting in more than 25 million spectra of targets spread over a large fraction of the southern sky. The 4MOST Facility Simulator (4FS) was developed to demonstrate the feasibility of this observing concept. 4MOST has been accepted for implementation by ESO with operations expected to start by the end of 2020. This paper provides a top-level overview of the 4MOST facility, while other papers in these proceedings provide more detailed descriptions of the instrument concept[1], the instrument requirements development[2], the systems engineering implementation[3], the instrument model[4], the fibre positioner concepts[5], the fibre feed[6], and the spectrographs[7].
|
|
| 5. |
|
|
