| 1. |
- Mansson, A, et al.
(författare)
-
In vitro sliding of actin filaments labelled with single quantum dots
- 2004
-
Ingår i: Biochemical and Biophysical Research Communications. - : Elsevier BV. - 1090-2104 .- 0006-291X. ; 314:2, s. 529-534
-
Tidskriftsartikel (refereegranskat)abstract
- We recently refined the in vitro motility assay for studies of actomyosin function to achieve rectified myosin induced sliding of actin filaments. This paves the way, both for detailed functional studies of actomyosin and for nanotechnological applications. In the latter applications it would be desirable to use actin filaments for transportation of cargoes (e.g., enzymes) between different predetermined locations on a chip. We here describe how single quantum dot labelling of isolated actin filaments simultaneously provides handles for cargo attachment and bright and photostable fluorescence labels facilitating cargo detection and filament tracking. Labelling was achieved with preserved actomyosin function using streptavidin-coated CdSe quantum dots (Qdots). These nanocrystals have several unique physical properties and the present work describes their first use for functional studies of isolated proteins outside the cell. The results, in addition to the nanotechnology developments, open for new types of in vitro assays of isolated biomolecules. (C) 2003 Elsevier Inc. All rights reserved.
|
|
| 2. |
- Guenot, Diego, et al.
(författare)
-
Probing electron correlation on the attosecond time scale
- 2014
-
Ingår i: High Intensity Lasers and High Field Phenomena, HILAS 2014. - 9781557529954
-
Konferensbidrag (refereegranskat)abstract
- We present experimental measurements and theoretical calculations of single and double ionization time delays in various noble gases using an interferometric method. The measured delays allow us to extract information on the electron correlation.
|
|
| 3. |
- Mansson, A, et al.
(författare)
-
Actin-based molecular motors for cargo transportation in nanotechnology - Potentials and challenges
- 2005
-
Ingår i: IEEE Transactions on Advanced Packaging. - 1521-3323. ; 28:4, s. 547-555
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we review the use of actin-based motors, (myosins; e.g., the molecular motor of muscle) in. nanotechnology. The review starts from the viewpoints of the molecular motors as being important devices responsible of cargo transportation in the cell and end in discussions about their employment in nanotechnological applications. First, we describe basic biophysics of the myosin motors with focus on their involvement in cargo transportation in the living cell, leading us over into a discussion about in vitro motility assays. These are biological test systems where the myosin-induced translocation of actin filaments is studied on an artificial surface outside the cell. Then follows a review about modified motility assays for production of ordered motion. Here, we discuss ours and others' work with regards to making micro- and nanostructured surfaces and channels where the position and direction of movement produced by molecular motors is controlled. In this section, we consider the role of the channel size in promoting unidirectional myosin-induced motion of actin filaments. Furthermore, we consider the usefulness of surface modifications, e.g., various silanization procedures in order to promote and hinder molecular motility, respectively. Particularly, we describe our latest test system being both morphologically and chemically nanostructured giving us unsurpassed possibilities to perform functional studies as well as extremely good spatio-temporal control. Then follows a section about nanotechnological cargo transportation systems based on the actomyosin motor system. For instance, we present results of attaching fluorescent quantum dots as cargoes to the actin filaments. In this section, we also discuss the possibilities of having cargo attachment and detachment being performed on demand. Finally, we consider the usefulness of molecular motors for lab-on-a-chip applications and the requirements for incorporating these motors in commercially viable devices. In this context, the significant potential of the actomyosin motor system to overcome traditional limitations of micro- and nanofluidics is stressed.
|
|
| 4. |
- Thomberg, T., et al.
(författare)
-
The anti SARS-CoV-2 activity of nanofibrous filter materials activated with metal clusters
- 2023
-
Ingår i: ATMOSPHERIC ENVIRONMENT-X. - : Elsevier BV. - 2590-1621. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Nanofibrous filter materials were prepared by electrospinning a solution of 28 wt% poly(vinylidene fluoride) in N,N-dimethylacetamide with and without the addition of 2 wt% AgNO3, Cu(NO3)(2)center dot 2.5H(2)O or ZnCl2. X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, inductively coupled plasma mass spectroscopy, thermogravimetric analysis, contact angle measurement, nitrogen sorption, and mercury intrusion porosimetry methods were used for the characterization of physical structure as well as the chemical composition of the electrospun materials. Particle filtration efficiency and antiviral activity against the SARS-CoV-2 alpha variant were tested in order to estimate the suitability of the prepared electrospun filter mate-rials for application as indoor air filtration systems with virucidal properties. All filter materials prepared with salts demonstrated very high particle filtration efficiency (>= 98.0%). The best antiviral activity was demonstrated by a material containing Cu(NO3)(2)center dot 2.5H(2)O in the spinning solution, which displayed the decrease in the number of infectious virions by three orders of magnitude after a contact time of 12 h. Materials with the addition of AgNO3 and ZnCl2 decreased the number of infectious virions after the same contact time by only-8 and-11 times, respectively.
|
|
| 5. |
- Matt, C. E., et al.
(författare)
-
Electron scattering, charge order, and pseudogap physics in La1.6-xNd0.4SrxCuO4 : An angle-resolved photoemission spectroscopy study
- 2015
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 92:13
-
Tidskriftsartikel (refereegranskat)abstract
- We report an angle-resolved photoemission study of the charge stripe ordered La1.6-xNd0.4SrxCuO4 (Nd-LSCO) system. A comparative and quantitative line-shape analysis is presented as the system evolves from the overdoped regime into the charge ordered phase. On the overdoped side (x = 0.20), a normal-state antinodal spectral gap opens upon cooling below 80 K. In this process, spectral weight is preserved but redistributed to larger energies. A correlation between this spectral gap and electron scattering is found. A different line shape is observed in the antinodal region of charge ordered Nd-LSCO x = 1/8. Significant low-energy spectral weight appears to be lost. These observations are discussed in terms of spectral-weight redistribution and gapping originating from charge stripe ordering.
|
|
| 6. |
- Berntsen, Magnus H., et al.
(författare)
-
A spin- and angle-resolving photoelectron spectrometer
- 2010
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 0034-6748 .- 1089-7623. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- A new type of hemispherical electron energy analyzer that permits angle and spin resolved photoelectron spectroscopy has been developed. The analyzer permits standard angle resolved spectra to be recorded with a two-dimensional detector in parallel with spin detection using a mini-Mott polarimeter. General design considerations as well as technical solutions are discussed and test results from the Au(111) surface state are presented.
|
|
| 7. |
- Bunk, Richard, et al.
(författare)
-
Actomyosin motility on nanostructured surfaces
- 2003
-
Ingår i: Biochemical and Biophysical Research Communications. - 1090-2104. ; 301:3, s. 783-788
-
Tidskriftsartikel (refereegranskat)abstract
- We have here, for the first time, used nanofabrication techniques to reproduce aspects of the ordered actomyosin arrangement in a muscle cell. The adsorption of functional heavy meromyosin (HMM) to five different resist polymers was first assessed. One group of resists (MRL-6000.1XP and ZEP-520) consistently exhibited high quality motility of actin filaments after incubation with HMM. A second group (PMMA-200, PMMA-950, and MRI-9030) generally gave low quality of motility with only few smoothly moving filaments. Based on these findings electron beam lithography was applied to a bi-layer resist system with PMMA-950 on top of MRL-6000.1XP. Grooves (100-200 nm wide) in the PMMA layer were created to expose the MRL-6000.1XP surface for adsorption of HMM and guidance of actin filament motility. This guidance was quite efficient allowing no U-turns of the filaments and approximately 20 times higher density of moving filaments in the grooves than on the surrounding PMMA.
|
|
| 8. |
- Egelberg, Peter, et al.
(författare)
-
Assessing cereal grain quality with a fully automated instrument using artificial neural network processing of digitized color video images
- 1995
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0819416789 ; 2345, s. 146-158
-
Konferensbidrag (refereegranskat)abstract
- A fully integrated instrument for cereal grain quality assessment is presented. Color video images of grains fed onto a belt are digitized. These images are then segmented into kernel entities, which are subject to the analysis. The number of degrees of freedom for each such object is decreased to a suitable level for Artificial Neural Network (ANN) processing. Feed- forward ANN's with one hidden layer are trained with respect to desired features such as purity and flour yield. The resulting performance is compatible with that of manual human ocular inspection and alternative measuring methods. A statistical analysis of training and test set population densities is used to estimate the prediction reliabilities and to set appropriate alarm levels. The instrument containing feeder belts, balance and CCD video camera is physically separated from the 90 MHz Pentium PC computer which is used to perform the segmentation, ANN analysis and for controlling the instrument under the Unix operating system. A user-friendly graphical user interface is used to operate the instrument. The processing time for a 50 g grain sample is approximately 2 - 3 minutes.
|
|
| 9. |
|
|
| 10. |
- Razzoli, E., et al.
(författare)
-
The Fermi surface and band folding in La2-xSrxCuO4, probed by angle-resolved photoemission
- 2010
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 12, s. 125003-
-
Tidskriftsartikel (refereegranskat)abstract
- A systematic angle-resolved photoemission study of the electronic structure of La2-xSrxCuO4 in a wide doping range is presented in this paper. In addition to the main energy band, we observed a weaker additional band, the (pi, pi) folded band, which shows unusual doping dependence. The appearance of the folded band suggests that a Fermi surface reconstruction is doping dependent and could already occur at zero magnetic field.
|
|
