| 1. |
- Calcagno, Giulio, 1990, et al.
(författare)
-
Effect of Nitrogen Doping on the Performance of Mesoporous CMK-8 Carbon Anodes for Li-Ion Batteries
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 13:19
-
Tidskriftsartikel (refereegranskat)abstract
- Designing carbonaceous materials with heightened attention to the structural properties such as porosity, and to the functionalization of the surface, is a growing topic in the lithium-ion batteries (LIBs) field. Using a mesoporous silica KIT-6 hard template, mesoporous carbons belonging to the OMCs (ordered mesoporous carbons) family, namely 3D cubic CMK-8 and N-CMK-8 were synthesized and thoroughly structurally characterized. XPS analysis confirmed the successful introduction of nitrogen, highlighting the nature of the different nitrogen atoms incorporated in the structure. The work aims at evaluating the electrochemical performance of N-doped ordered mesoporous carbons as an anode in LIBs, underlining the effect of the nitrogen functionalization. The N-CMK-8 electrode reveals higher reversible capacity, better cycling stability, and rate capability, as compared to the CMK-8 electrode. Coupling the 3D channel network with the functional N-doping increased the reversible capacity to similar to 1000 mAh center dot g(-1) for the N-CMK-8 from similar to 450 mAh center dot g(-1) for the undoped CMK-8 electrode. A full Li-ion cell was built using N-CMK-8 as an anode, commercial LiFePO4, a cathode, and LP30 commercial electrolyte, showing stable performance for 100 cycles. The combination of nitrogen functionalization and ordered porosity is promising for the development of high performing functional anodes.
|
|
| 2. |
- Calcagno, Giulio, 1990, et al.
(författare)
-
Fast charging negative electrodes based on anatase titanium dioxide beads for highly stable Li-ion capacitors
- 2020
-
Ingår i: Materials Today Energy. - : Elsevier BV. - 2468-6069. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid energy storage systems aim to achieve both high power and energy densities by combining supercapacitor-type and battery-type electrodes in tandem. The challenge is to find sustainable materials as fast charging negative electrodes, which are characterized by high capacity retention. In this study, mesoporous anatase beads are synthetized with tailored morphology to exploit fast surface redox reactions. The TiO2-based electrodes are properly paired with a commercial activated carbon cathode to form a Li-ion capacitor. The titania electrode exhibits high capacity and rate performance. The device shows extremely stable performance with an energy density of 27 mWh g-1 at a specific current of 2.5 A g−1 for 10,000 cycles. The remarkable stability is associated with a gradual shift of the potential during cycling as result of the formation of cubic LiTiO2 on the surface of the beads. This phenomenon renews the interest in using TiO2 as negative electrode for Li-ion capacitors.
|
|
| 3. |
- Lindberg, Simon, 1985, et al.
(författare)
-
Electrochemical Behaviour of Nb-Doped Anatase TiO2 Microbeads in an Ionic Liquid Electrolyte
- 2020
-
Ingår i: Batteries and Supercaps. - : Wiley. - 2566-6223. ; 3:11, s. 1233-1238
-
Tidskriftsartikel (refereegranskat)abstract
- TiO(2)is a promising material for high-power battery and supercapacitor applications. However, in general TiO(2)suffers from an initial irreversible capacity that limits its use in different applications. A combination of a microbead morphology, Nb-doping, and the use of an ionic liquid electrolyte is shown to significantly decrease the irreversible capacity loss. A change in the electrochemical response in the first cycles indicates formation of a solid-electrolyte interphase (SEI) or a modification of the structure of the surface layer of the TiO2/Nb microbeads, which apparently stabilises the performance. The change in the response is manifested in an increased charge transfer resistance and the presence of two charge transfer contributions. During prolonged cycling the TiO2/Nb electrode shows an excellent stability over 5000 cycles. Ex situ analysis after cycling shows that the overall microbead morphology is intact and that there are no changes in the crystal structure. However, a decrease in the intensity of the XRD pattern can point to a decrease in size of the nanocrystals building up the microbeads or the formation of amorphous phases.
|
|
