| 1. |
- Calcagno, Giulio, 1990, et al.
(författare)
-
Effect of Nitrogen Doping on the Performance of Mesoporous CMK-8 Carbon Anodes for Li-Ion Batteries
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 13:19
-
Tidskriftsartikel (refereegranskat)abstract
- Designing carbonaceous materials with heightened attention to the structural properties such as porosity, and to the functionalization of the surface, is a growing topic in the lithium-ion batteries (LIBs) field. Using a mesoporous silica KIT-6 hard template, mesoporous carbons belonging to the OMCs (ordered mesoporous carbons) family, namely 3D cubic CMK-8 and N-CMK-8 were synthesized and thoroughly structurally characterized. XPS analysis confirmed the successful introduction of nitrogen, highlighting the nature of the different nitrogen atoms incorporated in the structure. The work aims at evaluating the electrochemical performance of N-doped ordered mesoporous carbons as an anode in LIBs, underlining the effect of the nitrogen functionalization. The N-CMK-8 electrode reveals higher reversible capacity, better cycling stability, and rate capability, as compared to the CMK-8 electrode. Coupling the 3D channel network with the functional N-doping increased the reversible capacity to similar to 1000 mAh center dot g(-1) for the N-CMK-8 from similar to 450 mAh center dot g(-1) for the undoped CMK-8 electrode. A full Li-ion cell was built using N-CMK-8 as an anode, commercial LiFePO4, a cathode, and LP30 commercial electrolyte, showing stable performance for 100 cycles. The combination of nitrogen functionalization and ordered porosity is promising for the development of high performing functional anodes.
|
|
| 2. |
- Lee, Suyeong, et al.
(författare)
-
Recent developments and future challenges in designing rechargeable potassium-sulfur and potassium-selenium batteries
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 13:11
-
Tidskriftsartikel (refereegranskat)abstract
- The use of chalcogenide elements, such as sulfur (S) and selenium (Se), as cathode materials in rechargeable lithium (Li) and sodium (Na) batteries has been extensively investigated. Similar to Li and Na systems, rechargeable potassium-sulfur (K-S) and potassium-selenium (K-Se) batteries have recently attracted substantial interest because of the abundance of K and low associated costs. However, K-S and K-Se battery technologies are in their infancy because K possesses overactive chemical properties compared to Li and Na and the electrochemical mechanisms of such batteries are not fully understood. This paper summarizes current research trends and challenges with regard to K-S and K-Se batteries and reviews the associated fundamental science, key technological developments, and scientific challenges to evaluate the potential use of these batteries and finally determine effective pathways for their practical development.
|
|
| 3. |
- Liu, Yangyang, et al.
(författare)
-
Promoted rate and cycling capability of Li–S batteries enabled by targeted selection of co-solvent for the electrolyte
- 2020
-
Ingår i: Energy Storage Materials. - : Elsevier BV. - 2405-8297. ; 25, s. 131-136
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium sulfur (Li–S) batteries are considered as promising candidates for high-energy-density battery systems owing to the high theoretical capacity of sulfur (1675 mAh g−1) and low cost of raw materials. However, their practical application is hampered by low rate capability and rapid degradation of capacity, arising from the passivation of the cathode by lithium sulfides (Li2S2/Li2S) deposited during discharge and low interfacial stability of the Li anode. Herein, we report on a comprehensive strategy to select co-solvent to the electrolyte to regulate the deposition of lithium sulfides during charge-discharge process. We show that addition of a co-solvent with high solubility, and strong interaction with Li2S to a conventional electrolyte effectively mitigates the formation of a passivating layer on the sulfur cathode and dramatically improves the interfacial stability of the Li anode. We demonstrate that Sulfolane (SL) has these properties and that a Li–S cell with an electrolyte containing 6 vol% SL exhibits outstanding cyclic performance (0.083% decay per cycle) and rate capability (capacity density of 765 mAh g−1 at rate of 1.0C). Thus, we provide a facile strategy for the selection of co-solvent for improved performance of Li–S batteries, realizing their practical application for high-energy-density battery systems.
|
|
| 4. |
- Liu, Yangyang, et al.
(författare)
-
Stable Li metal anode by crystallographically oriented plating through in-situ surface doping
- 2020
-
Ingår i: Science China Materials. - : Springer Science and Business Media LLC. - 2199-4501 .- 2095-8226. ; 63:6, s. 1036-1045
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium (Li) metal is regarded as the holy grail anode material for high-energy-density batteries owing to its ultrahigh theoretical specific capacity. However, its practical application is severely hindered by the high reactivity of metallic Li against the commonly used electrolytes and uncontrolled growth of mossy/dendritic Li. Different from widely-used approaches of optimization of the electrolyte and/or interfacial engineering, here, we report a strategy of in-situ cerium (Ce) doping of Li metal to promote the preferential plating along the [200] direction and remarkably decreased surface energy of metallic Li. The in-situ Ce-doped Li shows a significantly reduced reactivity towards a standard electrolyte and, uniform and dendrite-free morphology after plating/stripping, as demonstrated by spectroscopic, morphological and electrochemical characterizations. In symmetric half cells, the in-situ Ce-doped Li shows a low corrosion current density against the electrolyte and drastically improved cycling even at a lean electrolyte condition. Furthermore, we show that the stable Li LiCoO2 full cells with improved coulombic efficiency and cycle life are also achieved using the Ce-doped Li metal anode. This work provides an inspiring approach to bring Li metal towards practical application in high energy-density batteries.
|
|
| 5. |
- Xiong, Shizhao, 1985, et al.
(författare)
-
Design of a Multifunctional Interlayer for NASCION-Based Solid-State Li Metal Batteries
- 2020
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 30:22
-
Tidskriftsartikel (refereegranskat)abstract
- NASCION-type Li conductors have great potential to bring high capacity solid-state batteries to realization, related to its properties such as high ionic conductivity, stability under ambient conditions, wide electrochemical stability window, and inexpensive production. However, their chemical and thermal instability toward metallic lithium (Li) has severely hindered attempts to utilize Li as anode material in NASCION-based battery systems. In this work, it is shown how a tailored multifunctional interlayer between the solid electrolyte and Li anode can successfully address the interfacial issues. This interlayer is designed by creating a quasi-solid-state paste in which the functionalities of LAGP (Li1.5Al0.5Ge1.5(PO4)3) nanoparticles and an ionic liquid (IL) electrolyte are combined. In a solid-sate cell, the LAGP-IL interlayer separates the Li metal from bulk LAGP and creates a chemically stable interface with low resistance (≈5 Ω cm2) and efficiently prevents thermal runaway at elevated temperatures (300 °C). Solid-state cells designed with the interlayer can be operated at high current densities, 1 mA cm−2, and enable high rate capability with high safety. Here developed strategy provides a generic path to design interlayers for solid-state Li metal batteries.
|
|
| 6. |
- Xu, Xieyu, et al.
(författare)
-
Role of Li-Ion Depletion on Electrode Surface: Underlying Mechanism for Electrodeposition Behavior of Lithium Metal Anode
- 2020
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 10:44
-
Tidskriftsartikel (refereegranskat)abstract
- The application of lithium metal as an anode material for next generation high energy-density batteries has to overcome the major bottleneck that is the seemingly unavoidable growth of Li dendrites caused by non-uniform electrodeposition on the electrode surface. This problem must be addressed by clarifying the detailed mechanism. In this work the mass-transfer of Li-ions is investigated, a key process controlling the electrochemical reaction. By a phase field modeling approach, the Li-ion concentration and the electric fields are visualized to reveal the role of three key experimental parameters, operating temperature, Li-salt concentration in electrolyte, and applied current density, on the microstructure of deposited Li. It is shown that a rapid depletion of Li-ions on electrode surface, induced by, e.g., low operating temperature, diluted electrolyte and a high applied current density, is the underlying driving force for non-uniform electrodeposition of Li. Thus, a viable route to realize a dendrite-free Li plating process would be to mitigate the depletion of Li-ions on the electrode surface. The methodology and results in this work may boost the practical applicability of Li anodes in Li metal batteries and other battery systems using metal anodes.
|
|
| 7. |
- Zhao, Peiyu, et al.
(författare)
-
Stable lithium metal anode enabled by high-dimensional lithium deposition through a functional organic substrate
- 2020
-
Ingår i: Energy Storage Materials. - : Elsevier BV. - 2405-8297. ; 33, s. 158-163
-
Tidskriftsartikel (refereegranskat)abstract
- The growth of lithium dendrites severely restricts the development of lithium metal batteries. In order to achieve the goal of dendrites-free lithium in principle, it is crucial and urgent to control nucleation and growth of lithium. Here, a functional organic layer of perylene-3, 4, 9, 10-tetracarboxydiimide-lithium (PTCDI-Li) is built on the lithium anode surface by in-situ chemical reaction of PTCDI and Li metal. PTCDI-Li, with high surface energy (-10.19 eV) and low diffusion barrier (0.89 eV), efficiently promotes disk-shaped high-dimensional nucleation by regulation of lithium ion flux upon lithium plating, leading to a dendrites-free morphology. When operating under a relatively high current density of 10 mA cm−2, the Li | Li symmetrical cells with PTCDI-Li exhibit outstanding cyclic stability for 300 hours with ultralow overpotential of 400 mV, superior to the most of the reported lithium anode. The corresponding PTCDI-Li batteries show high specific capacity and enhanced cycle life. We anticipate that this strategy of regulation of lithium deposition from one-dimensional to high-dimensional opens a new horizon in the development of dendrites-free Li anodes.
|
|
