| 1. |
- Abdollahi Sani, Negar, et al.
(författare)
-
All-printed diode operating at 1.6 GHz
- 2014
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:33, s. 11943-11948
-
Tidskriftsartikel (refereegranskat)abstract
- Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (IoT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within IoT applications.
|
|
| 2. |
- Andersson Ersman, Peter, et al.
(författare)
-
Screen printed digital circuits based on vertical organicelectrochemical transistors
- 2017
-
Ingår i: Flexible and Printed Electronics. - : IOP Publishing. - 2058-8585. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Vertical organic electrochemical transistors (OECTs) have been manufactured solely using screenprinting. The OECTs are based on PEDOT:PSS (poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid)), which defines the active material for both the transistor channel and the gateelectrode. The resulting vertical OECT devices and circuits exhibit low-voltage operation, relativelyfast switching, small footprint and high manufacturing yield; the last three parameters are explainedby the reliance of the transistor configuration on a robust structure in which the electrolyte verticallybridges the bottom channel and the top gate electrode. Two different architectures of the verticalOECT have been manufactured, characterized and evaluated in parallel throughout this report. Inaddition to the experimental work, SPICE models enabling simulations of standalone OECTs andOECT-based circuits have been developed. Our findings may pave the way for fully integrated, lowvoltageoperating and printed signal processing systems integrated with e.g. printed batteries, solarcells, sensors and communication interfaces. Such technology can then serve a low-cost basetechnology for the internet of things, smart packaging and home diagnostics applications.
|
|
| 3. |
- Kawahara, Jun, et al.
(författare)
-
Flexible active matrix addressed displays manufactured by printing and coating techniques
- 2013
-
Ingår i: Journal of Polymer Science Part B. - : Wiley-Blackwell. - 0887-6266 .- 1099-0488. ; 51:4, s. 265-271
-
Tidskriftsartikel (refereegranskat)abstract
- A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process.
|
|
| 4. |
- Ahrentorp, Fredrik, et al.
(författare)
-
Sensitive magnetic biodetection using magnetic multi-core nanoparticles and RCA coils
- 2017
-
Ingår i: Journal of Magnetism and Magnetic Materials. - : Elsevier BV. - 0304-8853 .- 1873-4766. ; 427, s. 14-18
-
Tidskriftsartikel (refereegranskat)abstract
- We use functionalized iron oxide magnetic multi-core particles of 100 nm in size (hydrodynamic particle diameter) and AC susceptometry (ACS) methods to measure the binding reactions between the magnetic nanoparticles (MNPs) and bio-analyte products produced from DNA segments using the rolling circle amplification (RCA) method. We use sensitive induction detection techniques in order to measure the ACS response. The DNA is amplified via RCA to generate RCA coils with a specific size that is dependent on the amplification time. After about 75 min of amplification we obtain an average RCA coil diameter of about 1 mu m. We determine a theoretical limit of detection (LOD) in the range of 11 attomole (corresponding to an analyte concentration of 55 fM for a sample volume of 200 mu L) from the ACS dynamic response after the MNPs have bound to the RCA coils and the measured ACS readout noise. We also discuss further possible improvements of the LOD.
|
|
| 5. |
- Almgren, Jonas, et al.
(författare)
-
SICStus Prolog library manual, version 2.1 #8
- 1993. - 1
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This Manual corresponds to SICStus Prolog release 2.1. #8 The Prolog library comprises a number of packages which are thought to be useful in a number of applications. Note that the predicates in the Prolog library are built-in predicates. One has to explicity load each package to get access to its predicates. To load a library package Package, you will normally enter a query. I ?- use_module(library(Package)). Library packages may be compiled and consulted as well as loaded.
|
|
| 6. |
- Alvarsson, Jesper J., et al.
(författare)
-
Aircraft noise and speech intelligibility in an outdoor living space
- 2014
-
Ingår i: Journal of the Acoustical Society of America. - : Acoustical Society of America (ASA). - 0001-4966 .- 1520-8524. ; 135:6, s. 3455-3462
-
Tidskriftsartikel (refereegranskat)abstract
- Studies of effects on speech intelligibility from aircraft noise in outdoor places are currently lacking. To explore these effects, first-order ambisonic recordings of aircraft noise were reproduced outdoors in a pergola. The average background level was 47 dB L-Aeq. Lists of phonetically balanced words (L-ASmax,L- word = 54 dB) were reproduced simultaneously with aircraft passage noise (L-ASmax,L- noise = 72-84 dB). Twenty individually tested listeners wrote down each presented word while seated in the pergola. The main results were (i) aircraft noise negatively affects speech intelligibility at sound pressure levels that exceed those of the speech sound (signal-to-noise ratio, S/N < 0), and (ii) the simple A-weighted S/N ratio was nearly as good an indicator of speech intelligibility as were two more advanced models, the Speech Intelligibility Index and Glasberg and Moore's [J. Audio Eng. Soc. 53, 906-918 (2005)] partial loudness model. This suggests that any of these indicators is applicable for predicting effects of aircraft noise on speech intelligibility outdoors.
|
|
| 7. |
- Andersson, Johan, et al.
(författare)
-
SICStus Prolog user's manual, version 2.1 #8
- 1993. - 1
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This Manual corresponds to SICStus Prolog release 2.1. #8 Prolog is a simple but powerful programming language developed at the University of Marseilles (Prolog : Manuel de Reference et d'Utilisation by P.Roussel, Groupe d'Intelligence Artificielle, Marseille-Luminy, 1975), as a practical tool for programming in Logic (Logic for Problem Solving by R.A. Kowalski, DCL Memo 75, Dept. of Artificial Intelligence, University of Edinburgh, March, 1974.)) From a user's point of view the major attraction of the language is ease of programming. Clear, readable, concise programs can be written quickly with few errors. This manual describes a Prolog system developed at the Swedish Institute of Computer Science in collaboration with Ericsson Telecom AB, NobelTech Systems AB, Infologics AB and Televerket under the IT4 program. The system consists of a WAM emulator written in C, a library and runtime system written in C and Prolog and an interpreter and a compiler written in Prolog. The Prolog engine is a Warren Abstract Machine (WAM) emulator defined by D:H:D: Warren in An Abstract Prolog Instruction Set, Tech. Note 309, International, Menlo Park, CA, 1983. Two modes of compilation are available: in-core i.e. incremental, and file-to-file.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
