| 1. |
- Berglund, U. W., et al.
(författare)
-
Validation and development of MTH1 inhibitors for treatment of cancer
- 2016
-
Ingår i: Annals of Oncology. - : Elsevier BV. - 0923-7534 .- 1569-8041. ; 27:12, s. 2275-2283
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Previously, we showed cancer cells rely on the MTH1 protein to prevent incorporation of otherwise deadly oxidised nucleotides into DNA and we developed MTH1 inhibitors which selectively kill cancer cells. Recently, several new and potent inhibitors of MTH1 were demonstrated to be non-toxic to cancer cells, challenging the utility of MTH1 inhibition as a target for cancer treatment. Material and methods: Human cancer cell lines were exposed in vitro to MTH1 inhibitors or depleted of MTH1 by siRNA or shRNA. 8-oxodG was measured by immunostaining and modified comet assay. Thermal Proteome profiling, proteomics, cellular thermal shift assays, kinase and CEREP panel were used for target engagement, mode of action and selectivity investigations of MTH1 inhibitors. Effect of MTH1 inhibition on tumour growth was explored in BRAF V600E-mutated malignant melanoma patient derived xenograft and human colon cancer SW480 and HCT116 xenograft models. Results: Here, we demonstrate that recently described MTH1 inhibitors, which fail to kill cancer cells, also fail to introduce the toxic oxidized nucleotides into DNA. We also describe a new MTH1 inhibitor TH1579, (Karonudib), an analogue of TH588, which is a potent, selective MTH1 inhibitor with good oral availability and demonstrates excellent pharmacokinetic and anti-cancer properties in vivo. Conclusion: We demonstrate that in order to kill cancer cells MTH1 inhibitors must also introduce oxidized nucleotides into DNA. Furthermore, we describe TH1579 as a best-in-class MTH1 inhibitor, which we expect to be useful in order to further validate the MTH1 inhibitor concept.
|
|
| 2. |
|
|
| 3. |
- Nazem Jalali, Pooria, et al.
(författare)
-
Diagnosis and optimisation of continuous casting practices through numerical modelling
- 2016
-
Ingår i: La Metallurgia Italiana. - : Associazione Italiana di Metallurgia. - 0026-0843. ; 108:2, s. 43-49
-
Tidskriftsartikel (refereegranskat)abstract
- An advanced numerical model has been used to diagnose casting practices for a peritectic grade in a Scandinavian steel producer. The model solves the Navier-Stokes equations by use of an interface tracking technique known as the Volume of Fluid (VOF). Furthermore, the model considers heat transfer, solidification and uses Discrete Phase Model to simulate a multiple phase system of steel, slag and argon. As a result, it is possible to predict the metal flow and slag infiltration as well as their influence on the heat flux and solidification under the effect of gas Injection and for transient conditions. Recent improvements to the model include a separation between mould powder and slag film and the consideration of the effect of crystallization on the interfacial resistance for a peritectic mould powder. The casting parameters analysed consist of the casting speed Interlocked with oscillation settings, Submerged Entry Nozzle (SEN) Immersion depths and argon injection flow rates. These practices were optimised by performing parametric studies to evaluate the shell growth, lubrication depth, cooling channel heat flux, etc. The application of the model allows for a prediction of trends and the results provide opportunities for further Improvement in the form of guidelines for the process and enhanced operational windows. The model has been tested under industrial conditions and the results indicate the improvements of the surface quality and process stability can be obtained.
|
|
| 4. |
|
|
| 5. |
- Scobbie, K., et al.
(författare)
-
Development of high toughness epoxy resins for liquid composite moulding
- 2009
-
Ingår i: ICCM International Conferences on Composite Materials. - London : IOM Communications.
-
Konferensbidrag (refereegranskat)abstract
- Epoxy matrix systems combining high toughness with rheological behaviour appropriate for liquid composite moulding are developed in this work. The neat resin and carbon laminate properties of a variety of novel formulations are evaluated and compared with reference materials to identify promising technologies for the development of advanced matrix materials suitable for infusion processing.
|
|
| 6. |
- Wittbom, C., et al.
(författare)
-
Effect of solubility limitation on hygroscopic growth and cloud drop activation of SOA particles produced from traffic exhausts
- 2018
-
Ingår i: Journal of Atmospheric Chemistry. - : Springer Science and Business Media LLC. - 0167-7764 .- 1573-0662. ; 75:4, s. 359-383
-
Tidskriftsartikel (refereegranskat)abstract
- Hygroscopicity measurements of secondary organic aerosol (SOA) particles often show inconsistent results between the supersaturated and subsaturated regimes, with higher activity as cloud condensation nucleus (CCN) than indicated by hygroscopic growth. In this study, we have investigated the discrepancy between the two regimes in the Lund University (LU) smog chamber. Various anthropogenic SOA were produced from mixtures of different precursors: anthropogenic light aromatic precursors (toluene and m-xylene), exhaust from a diesel passenger vehicle spiked with the light aromatic precursors, and exhaust from two different gasoline-powered passenger vehicles. Three types of seed particles were used: soot aggregates from a diesel vehicle, soot aggregates from a flame soot generator and ammonium sulphate (AS) particles. The hygroscopicity of seed particles with condensed, photochemically produced, anthropogenic SOA was investigated with respect to critical supersaturation (sc) and hygroscopic growth factor (gf) at 90% relative humidity. The hygroscopicity parameter κ was calculated for the two regimes: κsc and κgf, from measurements of sc and gf, respectively. The two κ showed significant discrepancies, with a κgf /κsc ratio closest to one for the gasoline experiments with ammonium sulphate seed and lower for the soot seed experiments. Empirical observations of sc and gf were compared to theoretical predictions, using modified Köhler theory where water solubility limitations were taken into account. The results indicate that the inconsistency between measurements in the subsaturated and supersaturated regimes may be explained by part of the organic material in the particles produced from anthropogenic precursors having a limited solubility in water.
|
|
| 7. |
|
|
| 8. |
- Bender, P., et al.
(författare)
-
Distribution functions of magnetic nanoparticles determined by a numerical inversion method
- 2017
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 19:7
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, we applied a regularized inversion method to extract the particle size, magnetic moment and relaxation-time distribution of magnetic nanoparticles from small-angle x-ray scattering (SAXS), DC magnetization (DCM) and AC susceptibility (ACS) measurements. For the measurements the particles were colloidally dispersed in water. At first approximation the particles could be assumed to be spherically shaped and homogeneously magnetized single-domain particles. As model functions for the inversion, we used the particle form factor of a sphere (SAXS), the Langevin function (DCM) and the Debye model (ACS). The extracted distributions exhibited features/peaks that could be distinctly attributed to the individually dispersed and non-interacting nanoparticles. Further analysis of these peaks enabled, in combination with a prior characterization of the particle ensemble by electron microscopy and dynamic light scattering, a detailed structural and magnetic characterization of the particles. Additionally, all three extracted distributions featured peaks, which indicated deviations of the scattering (SAXS), magnetization (DCM) or relaxation (ACS) behavior from the one expected for individually dispersed, homogeneously magnetized nanoparticles. These deviations could be mainly attributed to partial agglomeration (SAXS, DCM, ACS), uncorrelated surface spins (DCM) and/or intra-well relaxation processes (ACS). The main advantage of the numerical inversion method is that no ad hoc assumptions regarding the line shape of the extracted distribution functions are required, which enabled the detection of these contributions. We highlighted this by comparing the results with the results obtained by standard model fits, where the functional form of the distributions was a priori assumed to be log-normal shaped.
|
|
| 9. |
- Bender, P., et al.
(författare)
-
Structural and magnetic properties of multi-core nanoparticles analysed using a generalised numerical inversion method
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- The structural and magnetic properties of magnetic multi-core particles were determined by numerical inversion of small angle scattering and isothermal magnetisation data. The investigated particles consist of iron oxide nanoparticle cores (9 nm) embedded in poly(styrene) spheres (160 nm). A thorough physical characterisation of the particles included transmission electron microscopy, X-ray diffraction and asymmetrical flow field-flow fractionation. Their structure was ultimately disclosed by an indirect Fourier transform of static light scattering, small angle X-ray scattering and small angle neutron scattering data of the colloidal dispersion. The extracted pair distance distribution functions clearly indicated that the cores were mostly accumulated in the outer surface layers of the poly(styrene) spheres. To investigate the magnetic properties, the isothermal magnetisation curves of the multicore particles (immobilised and dispersed in water) were analysed. The study stands out by applying the same numerical approach to extract the apparent moment distributions of the particles as for the indirect Fourier transform. It could be shown that the main peak of the apparent moment distributions correlated to the expected intrinsic moment distribution of the cores. Additional peaks were observed which signaled deviations of the isothermal magnetisation behavior from the non-interacting case, indicating weak dipolar interactions.
|
|
| 10. |
- Bender, R., et al.
(författare)
-
Corrosion challenges towards a sustainable society
- 2022
-
Ingår i: Materials and corrosion - Werkstoffe und Korrosion. - : Wiley. - 0947-5117 .- 1521-4176. ; 73:11, s. 1730-1751
-
Tidskriftsartikel (refereegranskat)abstract
- A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate-resilient energy systems and infrastructures brings with it a long-term direction, so as a result the long-term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
|
|
