| 1. |
- Feldmann, M., et al.
(författare)
-
Economic and durable design of composite bridges with integral abutments
- 2010
-
Rapport (refereegranskat)abstract
- In the design and construction of bridges, questions of sustainability, maintenance and durability are becoming more and more important for European road administrations, in addition to safety and serviceability issues. Therefore integral abutment bridges are becoming highly attractive to designers, constructors and road administrations, as they tend to be less expensive to build, easier to maintain and more economical to own over their life time. Bearings and joints are main sources of maintenance costs during a lifetime. These costs vanish because the bridges are joint- and bearing-free. However, this very advantage complicates the design compared to conventional bridges in some crucial respects. Combined with the fact that most European countries have only limited experience with integral bridges to date, this leads to a reluctance of road administrations to use this bridge type. Thus the main objective of the project is to experimentally and theoretically investigate the behaviour of critical points of integral abutment bridges. Regarding the soil-structure interaction, recommendations are elaborated based on monitoring results as well as previous research and monitoring campaigns. Conventional HP piles and sheet piles are investigated as a foundation. Furthermore a hinged HP connection is developed to decrease the stresses in the pile system. An investigation of the design and construction of the slab to pavement approach is also carried out to avoid major damages to the structure. Finally the most important information is condensed into the essential features in form of a 'Design guide for composite bridges with integral abutments'
|
|
| 2. |
- Bull, Peter, et al.
(författare)
-
Förstudie obemannade farkoster
- 2012
-
Rapport (populärvet., debatt m.m.)abstract
- Obemannade farkoster används allt oftare, och i allt fler roller, i dagens kon- flikter. Denna rapport ger en bred överblick över området militära obemannade farkoster, samt rekommendationer för inriktningen av framtida FoU-satsningar inom området.Överblicken över området har fokus på både system, förmågor och verksam- heter som är relevanta för Försvarsmakten. Genom att låta de insatsförmågor som definieras i FMUP (Försvarsmaktens utvecklingsplan) gå som en röd tråd genom rapporten, både när specifika system diskuteras och när möjliga scena- rier där obemannade farkoster kan vara till nytta beskrivs, har vi försökt hålla både bredd och relevans i dokumentet.Rekommendationerna vilar på en genomgång av de inriktningsdokument som producerats i Försvarsmakten, t.ex. Perspektivplanneringen och FMUP, besök vid de enheter som dagligen använder obemannade farkoster, UAV-enheten i Karlsborg och Swedec i Eksjö, samt den områdesöverblick som nämns ovan. Slutsatserna är att den effektivaste kompetensuppbyggnaden och kunskapsöver- föringen fås om man skapar breda tvärvetenskapliga projekt inom respektive systemkategori (UAV, UGV, etc) med nära kontakter till materielförsörjnings- processen och perspektivplaneringen. Dessa kan samla kompetensen inom FHS och FOI, övervaka forskningsfronten genom att bevaka tävlingar, konferenser samt delta i internationella samarbeten, samt överföra det samlade resultaten till Försvarsmakten genom demonstrationer av verkliga eller simulerade delsy- stem och interaktiva simuleringar av hela system. Just systemsimuleringar kan göras särskilt realistiska, eftersom interaktionen med de riktiga obemannade systemen till stor del sker igenom kontrollstationernas datorer. På så sätt ska- pas en känsla för både hot och möjligheter med de nya systemen, vilket gagnar både taktikutveckling och materielprocesser.
|
|
| 3. |
- McGinn, Steven, et al.
(författare)
-
New Technologies for DNA analysis-A review of the READNA Project.
- 2016
-
Ingår i: New Biotechnology. - : Elsevier BV. - 1876-4347 .- 1871-6784.
-
Forskningsöversikt (refereegranskat)abstract
- The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and developed a huge body of insights into nucleic acid analysis, ranging from improvements and implementation of current technologies to the most promising sequencing technologies that constitute a 3(rd) and 4(th) generation of sequencing methods with nanopores and in situ sequencing, respectively.
|
|
| 4. |
- Jones, Geraint H., et al.
(författare)
-
The Comet Interceptor Mission
- 2024
-
Ingår i: Space Science Reviews. - : Springer Nature. - 0038-6308 .- 1572-9672. ; 220:1
-
Tidskriftsartikel (refereegranskat)abstract
- Here we describe the novel, multi-point Comet Interceptor mission. It is dedicated to the exploration of a little-processed long-period comet, possibly entering the inner Solar System for the first time, or to encounter an interstellar object originating at another star. The objectives of the mission are to address the following questions: What are the surface composition, shape, morphology, and structure of the target object? What is the composition of the gas and dust in the coma, its connection to the nucleus, and the nature of its interaction with the solar wind? The mission was proposed to the European Space Agency in 2018, and formally adopted by the agency in June 2022, for launch in 2029 together with the Ariel mission. Comet Interceptor will take advantage of the opportunity presented by ESA’s F-Class call for fast, flexible, low-cost missions to which it was proposed. The call required a launch to a halo orbit around the Sun-Earth L2 point. The mission can take advantage of this placement to wait for the discovery of a suitable comet reachable with its minimum Δ V capability of 600 ms − 1 . Comet Interceptor will be unique in encountering and studying, at a nominal closest approach distance of 1000 km, a comet that represents a near-pristine sample of material from the formation of the Solar System. It will also add a capability that no previous cometary mission has had, which is to deploy two sub-probes – B1, provided by the Japanese space agency, JAXA, and B2 – that will follow different trajectories through the coma. While the main probe passes at a nominal 1000 km distance, probes B1 and B2 will follow different chords through the coma at distances of 850 km and 400 km, respectively. The result will be unique, simultaneous, spatially resolved information of the 3-dimensional properties of the target comet and its interaction with the space environment. We present the mission’s science background leading to these objectives, as well as an overview of the scientific instruments, mission design, and schedule.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Lang, Jenny, et al.
(författare)
-
Thermo-mechanical reliability and performance degradation of a lead-free RF power amplifier with GaN-on-SiC HEMTs
- 2017
-
Ingår i: Materials Science Forum. - : Trans Tech Publications. - 9783035710434 ; , s. 715-718
-
Konferensbidrag (refereegranskat)abstract
- RF power amplifier demonstrators containing each one GaN-on-SiC, HEMT, CHZ015AQEG, from UMS in SMD quad-flat no-leads package (QFN) were subjected to thermal cycles (TC) and power cycles (PC) followed by electrical, thermal and structural evaluation. Two types of solders i.e. Sn63Pb36Ag2 and lead-free SnAgCu (SAC305) and two types of TIM materials (NanoTIM and TgonTM 805) for PCB attachment to liquid cold plate were tested for thermomechanical reliability. Changes in electrical performance of the devices namely reduction of the current saturation value, threshold voltage shift, increase of the leakage current and degradation of the HF performance were observed as a result of an accumulated current stress during PC. No significant changes in the investigated solder or TIM materials were observed.
|
|
| 9. |
- Lang, Jenny, et al.
(författare)
-
Reliability study of a RF power amplifier with GaN-on-SiC HEMTs
- 2016
-
Ingår i: ECS Transactions. - Pennington, N.J. : The Electrochemical Society. - 9781607685395 ; , s. 49-59
-
Konferensbidrag (refereegranskat)abstract
- RF power amplifier demonstrators containing each one GaN-on- SiC, HEMT, CHZ015A-QEG, from UMS in SMD quad-flat noleads package (QFN) were subjected to thermal cycles (TC) and power cycles (PC) and evaluated electrically, thermally and structurally. Two types of lead-free solders (Sn63Pb36Ag2 and SnAgCu (SAC305)) and two types of TIM materials (NanoTIM and TgonTM 805) for PCB attachment to liquid cold plate were tested for thermo-mechanical reliability. Changes in electrical performance of the devices namely reduction of the current saturation value, threshold voltage shift, increase of the leakage current and degradation of the HF performance were observed as a result of an accumulated current stress during PC. No significant changes in the investigated solder or TIM materials were observed.
|
|
| 10. |
- Rasilainen, Kimmo, 1987, et al.
(författare)
-
Thermal characteristics of vertically-integrated GaN/SiC-on-Si assemblies: A comparative study
- 2019
-
Ingår i: Proceedings - Electronic Components and Technology Conference. - 0569-5503. ; 2019-May, s. 1405-1412
-
Konferensbidrag (refereegranskat)abstract
- This work investigates the thermal characteristics of a vertically-stacked, heterogeneously-integrated assembly intended for millimetre-wave communications systems. The assembly combines materials that enable the generation of high output power as well as high degree of integration for improved performance, and vertical integration of the different materials enables a compact footprint. Suitability of thermal solutions based on metal pillars, solder balls, and ball grid arrays (BGA) is investigated. Both ideal, fully-populated arrays of interconnects and partially-filled ones more suitable for practical implementations are considered using theoretical calculations and numerical thermal simulations. With the assumptions used, simulation results show that arrays of Cu pillars and large solder bumps with a pitch of 150 μm provide good thermal performance also with a simplified grid and reduced number of interconnects. In the current geometry, the most important locations for the pillars and bumps are near the heat sources, and the use of a rim of interconnects around the assembly perimeter can reduce the temperature by several degrees - even when the majority of the other interconnects is focused beneath the heat sources.
|
|
