| 1. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:9
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 3. |
- Meyer, H.F., et al.
(författare)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
| 4. |
- Reimerdes, H., et al.
(författare)
-
Overview of the TCV tokamak experimental programme
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with 'small' (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations.
|
|
| 5. |
- Korablev, O., et al.
(författare)
-
The Atmospheric Chemistry Suite (ACS) of Three Spectrometers for the ExoMars 2016 Trace Gas Orbiter
- 2018
-
Ingår i: Space Science Reviews. - : Springer. - 0038-6308 .- 1572-9672. ; 214:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Atmospheric Chemistry Suite (ACS) package is an element of the Russian contribution to the ESA-Roscosmos ExoMars 2016 Trace Gas Orbiter (TGO) mission. ACS consists of three separate infrared spectrometers, sharing common mechanical, electrical, and thermal interfaces. This ensemble of spectrometers has been designed and developed in response to the Trace Gas Orbiter mission objectives that specifically address the requirement of high sensitivity instruments to enable the unambiguous detection of trace gases of potential geophysical or biological interest. For this reason, ACS embarks a set of instruments achieving simultaneously very high accuracy (ppt level), very high resolving power (>10,000) and large spectral coverage (0.7 to 17 μm—the visible to thermal infrared range). The near-infrared (NIR) channel is a versatile spectrometer covering the 0.7–1.6 μm spectral range with a resolving power of ∼20,000. NIR employs the combination of an echelle grating with an AOTF (Acousto-Optical Tunable Filter) as diffraction order selector. This channel will be mainly operated in solar occultation and nadir, and can also perform limb observations. The scientific goals of NIR are the measurements of water vapor, aerosols, and dayside or night side airglows. The mid-infrared (MIR) channel is a cross-dispersion echelle instrument dedicated to solar occultation measurements in the 2.2–4.4 μm range. MIR achieves a resolving power of >50,000. It has been designed to accomplish the most sensitive measurements ever of the trace gases present in the Martian atmosphere. The thermal-infrared channel (TIRVIM) is a 2-inch double pendulum Fourier-transform spectrometer encompassing the spectral range of 1.7–17 μm with apodized resolution varying from 0.2 to 1.3 cm−1. TIRVIM is primarily dedicated to profiling temperature from the surface up to ∼60 km and to monitor aerosol abundance in nadir. TIRVIM also has a limb and solar occultation capability. The technical concept of the instrument, its accommodation on the spacecraft, the optical designs as well as some of the calibrations, and the expected performances for its three channels are described.
|
|
| 6. |
- Olsen, V. S., et al.
(författare)
-
Evidence of defect band mechanism responsible for band gap evolution in (ZnO)(1-x)(GaN)(x) alloys
- 2019
-
Ingår i: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 100:16
-
Tidskriftsartikel (refereegranskat)abstract
- It is known that (ZnO)(1-x)(GaN)(x) alloys demonstrate remarkable energy band bowing, making the material absorb in the visible range, in spite of the binary components being classical wide band gap semiconductors. However, the origin of this bowing is not settled; two major mechanisms are under debate: Influence of the orbital repulsion and/or formation of a defect band. In the present work, we applied a combination of the absorption and emission measurements on the samples exhibiting an outstanding nanoscale level of (ZnO)(1-x)(GaN)(x) homogeneity as monitored by the high resolution electron microscopy equipped with the energy dispersive x-ray analysis and the electron energy loss spectroscopy; moreover the experimental data were set in the context of the computational analysis of the alloys employing density functional theory and quasiparticle GW approximation. A prominent discrepancy in the band gap values as deduced from the absorption and emission experiments was observed systematically for the alloys with different compositions and interpreted as evidence for the absorption gap shrinking due to the defect band formation. Computational data support the argument, revealing only minor variations in the bulk of the conduction and valence band structures of the alloys, except for a characteristic "tail" in the vicinity of the valence band maximum. As such, we conclude that the energy gap bowing in (ZnO)(1-x)(GaN)(x) alloys is due to the defect band formation, presumably at the top of the valence band maximum.
|
|
| 7. |
- Heikkila, I., et al.
(författare)
-
Comparison Between Microstructures, Deformation Mechanisms and Micromechanical Properties of 316L Stainless Steel Consolidated by Laser Melting
- 2018
-
Ingår i: La Metallurgia Italiana. - 0026-0843. ; :3, s. 5-11
-
Tidskriftsartikel (refereegranskat)abstract
- A powder bed fusion laser technique (PBF-LS) was used to fabricate 316L stainless steel specimens for characterization of microstructures and micromechanical properties under uniaxial loading in-situ in a scanning electron microscope (SEM). Correlations between the microstructure, deformation mechanisms and mechanical properties were investigated. The results show that the morphology of the microstructure is very different when the sample building orientation was altered. In tensile test specimens that were machined from horizontally oriented rectangular beams, smaller grains and a more deformed microstructure were observed. Under uniaxial loading the yield strength and initial work hardening rate was highest in the horizontally built specimens. The uniform and total elongation was better for tensile test samples that were machined from vertically built rectangular specimens. Slip and twinning were the dominant deformation mechanisms with correlation to the observed texture. The observed anisotropic mechanical behavior can be explained by the differences in the distribution of deformed and sub-structured microstructures along the strain path.
|
|
| 8. |
- Olsén, Peter, et al.
(författare)
-
Toward Biocomposites Recycling : Localized Interphase Degradation in PCL-Cellulose Biocomposites and its Mitigation
- 2020
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 21:5, s. 1795-1801
-
Tidskriftsartikel (refereegranskat)abstract
- Recyclable biocomposites based on degradable polymer systems and cellulosic plant fibers are attractive in a sustainable society, because of enhanced polymer properties and also from an end-of-life perspective. Improved understanding is required for how the degradable polymer matrix is affected during compounding in addition to effects from the cellulosic fiber structure and its chemical nature. This work reveals that a poly(ϵ-caprolactone) matrix undergoes localized, heterogeneous polymer degradation in the fiber-matrix interphase region during melt-compounding. The extent of localized degradation correlates with the initial moisture content in the wood cellulose fiber, where moisture content is controlled by different fiber modification methods by PCL-grafting. As an effect, high moisture content results in a destabilized and degraded fiber-matrix interphase. This was found through careful analysis of how the polymer population changed after compounding, using two different methods: molar mass distribution from SEC and end-group concentration from NMR. The results are important not only with regard to fiber/matrix interface compatibility but also to understand fiber modification for improved biocomposites recycling.
|
|
| 9. |
- Olsen, S. H., et al.
(författare)
-
Strained Si/SiGe MOS technology : Improving gate dielectric integrity
- 2009
-
Ingår i: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 86:3, s. 218-223
-
Tidskriftsartikel (refereegranskat)abstract
- Strained Si is recognised as a necessary technology booster for the nanoelectronics regime. This work shows that high levels of stress attainable from globally strained Si/SiGe platforms can benefit gate leakage and reliability in addition to MOSFET channel mobility. Device self-heating due to the low thermal conductivity of SiGe is shown to be the dominating factor behind compromised performance against short channel strained Si/SiGe MOSFETs. Novel thin virtual substrates aimed at reducing self-heating effects are investigated. In addition to reducing self-heating effects, the thin Virtual substrates provide further improvements to gate oxide integrity, reliability and lifetime compared with conventional thick virtual substrates. This is attributed to tire lower surface roughness of the thin virtual substrates which arises due to the reduced interactions of strain-relieving misfit dislocations during thin Virtual substrate growth. Good agreement between experimental data and physical models is demonstrated, enabling gate leakage mechanisms to be identified. The advantages and challenges of using globally strained Si/SiGe to advance MOS technology are discussed.
|
|
| 10. |
- O'Neill, A., et al.
(författare)
-
Reduced self-heating by strained silicon substrate engineering
- 2008
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 254:19, s. 6182-6185
-
Tidskriftsartikel (refereegranskat)abstract
- Substrate engineering innovations such as SOI and the use of Si/SiGe virtual substrates become necessary in order to maintain performance leverage of integrated circuits with continued scaling. The relevance of thermal effects in device design increases since the thermal conductivity of these new materials is poor. The electrical performance of devices fabricated on thin virtual substrates grown by two different techniques is presented. It is found that self-heating is reduced and that thermal resistance measurements agree with modelling predictions. The reduction in performance enhancement seen in many strained Si MOSFETs is found here to be largely due to self-heating effects, rather than parasitics or the loss of strain.
|
|
