| 1. |
- Adam, Rania Elhadi, 1978-, et al.
(författare)
-
Graphene-based plasmonic nanocomposites for highly enhanced solar-driven photocatalytic activities
- 2019
-
Ingår i: RSC Advances. - Cambridge : Royal Meteorological Society. - 2046-2069. ; 9:52, s. 30585-30598
-
Tidskriftsartikel (refereegranskat)abstract
- High-efficiency photocatalysts are crucial for the removal of organic pollutants and environmental sustainability. In the present work, we report on a new low-temperature hydrothermal chemical method, assisted by ultrasonication, to synthesize disruptive plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis. The plasmonic nanocomposites were investigated by a wide range of characterization techniques, confirming successful formation of photocatalysts with excellent degradation efficiency. Using Congo red as a model dye molecule, our experimental results demonstrated a photocatalytic reactivity exceeding 90% efficiency after one hour simulated solar irradiation. The significantly enhanced degradation efficiency is attributed to improved electronic properties of the nanocomposites by hybridization of the graphene and to the addition of Ag/AgI which generates a strong surface plasmon resonance effect in the metallic silver further improving the photocatalytic activity and stability under solar irradiation. Scavenger experiments suggest that superoxide and hydroxyl radicals are responsible for the photodegradation of Congo red. Our findings are important for the fundamental understanding of the photocatalytic mechanism of ZnO/graphene/Ag/AgI nanocomposites and can lead to further development of novel efficient photocatalyst materials.
|
|
| 2. |
- Bakhit, Babak, 1983-, et al.
(författare)
-
Age hardening in superhard ZrB2-rich Zr1-xTaxBy thin films
- 2021
-
Ingår i: Scripta Materialia. - : Elsevier. - 1359-6462 .- 1872-8456. ; 191, s. 120-125
-
Tidskriftsartikel (refereegranskat)abstract
- We recently showed that sputter-deposited Zr1-xTaxBy thin films have hexagonal AlB2-type columnar nanostructure in which column boundaries are B-rich for x < 0.2, while Ta-rich for x ≥ 0.2. As-deposited layers with x ≥ 0.2 exhibit higher hardness and, simultaneously, enhanced toughness. Here, we study the mechanical properties of ZrB2.4, Zr0.8Ta0.2B1.8, and Zr0.7Ta0.3B1.5 films annealed in Ar atmosphere as a function of annealing temperature Ta up to 1200 °C. In-situ and ex-situ nanoindentation analyses reveal that all films undergo age hardening up to Ta = 800 °C, with the highest hardness achieved for Zr0.8Ta0.2B1.8 (45.5±1.0 GPa). The age hardening, which occurs without any phase separation or decomposition, can be explained by point-defect recovery that enhances chemical bond density. Although hardness decreases at Ta > 800 °C due mainly to recrystallization, column coarsening, and planar defect annihilation, all layers show hardness values above 34 GPa over the entire Ta range.
|
|
| 3. |
- Bakhit, Babak, 1983-, et al.
(författare)
-
Self-organized columnar Zr0.7Ta0.3B1.5 core/shell-nanostructure thin films
- 2020
-
Ingår i: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 401
-
Tidskriftsartikel (refereegranskat)abstract
- We recently showed that Zr1−xTaxBy thin films have columnar nanostructure in which column boundaries are B-rich for x < 0.2, while Ta-rich for x ≥ 0.2. Layers with x ≥ 0.2 exhibit higher hardness and, simultaneously, enhanced toughness. Here, we determine the atomic-scale nanostructure of sputter-deposited columnar Zr0.7Ta0.3B1.5 thin films. The columns, 95 ± 17 Å, are core/shell nanostructures in which 80 ± 15-Å cores are crystalline hexagonal-AlB2-structure Zr-rich stoichiometric Zr1−xTaxB2. The shell structure is a narrow dense, disordered region that is Ta-rich and highly B-deficient. The cores are formed under intense ion mixing via preferential Ta segregation, due to the lower formation enthalpy of TaB2 than ZrB2, in response to the chemical driving force to form a stoichiometric compound. The films with unique combination of nanosized crystalline cores and dense metallic-glass-like shells provide excellent mechanical properties.
|
|
| 4. |
- Dorri, Samira, 1988-, et al.
(författare)
-
Enhanced quality of single crystal CrBx/TiBy diboride superlattices by controlling boron stoichiometry during sputter deposition
- 2024
-
Ingår i: Applied Surface Science. - : Elsevier. - 0169-4332 .- 1873-5584.
-
Tidskriftsartikel (refereegranskat)abstract
- Single-crystal CrB2/TiB2 diboride superlattices with well-defined layers are promising candidates for neutron optics. However, excess B in sputter-deposited TiBy using a single TiB2 target deteriorates the structural quality of CrBx/TiBy (0001) superlattices. We study the influence of co-sputtering of TiB2 + Ti on the stoichiometry and crystalline quality of 300-nm-thick TiBy single layers and CrBx/TiBy (0001) superlattices on Al2O3(0001) substrates grown by DC magnetron sputter epitaxy at growth-temperatures TS ranging from 600 to 900 °C. By controlling the relative applied powers to the TiB2 and Ti magnetrons, y could be reduced from 3.3 to 0.9. TiB2.3 grown at 750 °C exhibited epitaxial domains about 10x larger than non-co-sputtered films. Close-to-stoichiometry CrB1.7/TiB2.3 superlattices with modulation periods Λ = 6 nm grown at 750 °C showed the highest single crystal quality and best layer definition. TiB2.3 layers display rough top interfaces indicating kinetically limited growth while CrB1.7 forms flat and abrupt top interfaces indicating epitaxial growth with high adatom mobility.
|
|
| 5. |
- Dorri, Samira, 1988-, et al.
(författare)
-
Oxidation kinetics of overstoichiometric TiB2 thin films grown by DC magnetron sputtering
- 2022
-
Ingår i: Corrosion Science. - : Pergamon-Elsevier Science Ltd. - 0010-938X .- 1879-0496. ; 206
-
Tidskriftsartikel (refereegranskat)abstract
- We systematically study the oxidation properties of sputter-deposited TiB2.5 coatings up to 700 °C. Oxide-scale thickness dox increases linearly with time ta for 300, 400, 500, and 700 °C, while an oxidation-protective behavior occurs with dox=250∙ta0.2 at 600 °C. Oxide-layer’s structure changes from amorphous to rutile/anatase-TiO2 at temperatures ≥ 500 °C. Abnormally low oxidation rate at 600 °C is attributed to a highly dense columnar TiO2-sublayer growing near oxide/film interface with a top-amorphous thin layer, suppressing oxygen diffusion. A model is proposed to explain the oxide-scale evolution at 600 °C. Decreasing heating rate to 1.0 °C/min plays a noticeable role in the TiB2.5 oxidation.
|
|
| 6. |
- Ekström, Erik, 1989-, et al.
(författare)
-
Epitaxial Growth of CaMnO3-y Films on LaAlO3 (112 over bar 0) by Pulsed Direct Current Reactive Magnetron Sputtering
- 2022
-
Ingår i: Physica Status Solidi. Rapid Research Letters. - : Wiley-V C H Verlag GMBH. - 1862-6254 .- 1862-6270. ; 16:4
-
Tidskriftsartikel (refereegranskat)abstract
- CaMnO3 is a perovskite with attractive magnetic and thermoelectric properties. CaMnO3 films are usually grown by pulsed laser deposition or radio frequency magnetron sputtering from ceramic targets. Herein, epitaxial growth of CaMnO3-y (002) films on a (112 over bar 0)-oriented LaAlO3 substrate using pulsed direct current reactive magnetron sputtering is demonstrated, which is more suitable for industrial scale depositions. The CaMnO3-y shows growth with a small in-plane tilt of <approximate to 0.2 degrees toward the (200) plane of CaMnO3-y and the (1 over bar 104) with respect to the LaAlO3 (112 over bar 0) substrate. X-ray photoelectron spectroscopy of the electronic core levels shows an oxygen deficiency described by CaMnO2.58 that yields a lower Seebeck coefficient and a higher electrical resistivity when compared to stoichiometric CaMnO3. The LaAlO3 (112 over bar 0) substrate promotes tensile-strained growth of single crystals. Scanning transmission electron microscopy and electron energy loss spectroscopy reveal antiphase boundaries composed of Ca on Mn sites along and , forming stacking faults.
|
|
| 7. |
- Folkenant, Matilda, et al.
(författare)
-
Structure and properties of Cr–C/Ag films deposited by magnetron sputtering
- 2015
-
Ingår i: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 281, s. 184-192
-
Tidskriftsartikel (refereegranskat)abstract
- Cr–C/Ag thin films with 0–14 at.% Ag have been deposited by magnetron sputtering from elemental targets. The samples were analyzed by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) to study their structure and chemical bonding. A complex nanocomposite structure consisting of three phases; nanocrystalline Ag, amorphous CrCx and amorphous carbon is reported. The carbon content in the amorphous carbide phase was determined to be 32–33 at.% C, independent of Ag content. Furthermore, SEM and XPS results showed higher amounts of Ag on the surface compared to the bulk. The hardness and Young's modulus were reduced from 12 to 8 GPa and from 270 to 170 GPa, respectively, with increasing Ag content. The contact resistance was found to decrease with Ag addition, with the most Ag rich sample approaching the values of an Ag reference sample. Initial tribological tests gave friction coefficients in the range of 0.3 to 0.5, with no clear trends. Annealing tests show that the material is stable after annealing at 500 °C for 1 h, but not after annealing at 800 °C for 1 h. In combination, these results suggest that sputtered Cr–C/Ag films could be potentially applicable for electric contact applications.
|
|
| 8. |
- Halim, Joseph, 1985-, et al.
(författare)
-
Synthesis of Two-Dimensional Nb1.33C (MXene) with Randomly Distributed Vacancies by Etching of the Quaternary Solid Solution (Nb2/3Sc1/3)2AlC MAX Phase
- 2018
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 1:6, s. 2455-2460
-
Tidskriftsartikel (refereegranskat)abstract
- Introducing point defects in two-dimensional (2D) materials can alter or enhance their properties. Here, we demonstrate how etching a laminated (Nb2/3Sc1/3)2AlC MAX phase (solid solution) of both the Sc and Al atoms results in a 2D Nb1.33C material (MXene) with a large number of vacancies and vacancy clusters. This method is applicable to any quaternary, or higher, MAX phase, wherein one of the transition metals is more reactive than the other and could be of vital importance in applications such as catalysis and energy storage. We also report, for the first time, on the existence of solid solution (Nb2/3Sc1/3)3AlC2 and (Nb2/3Sc1/3)4AlC3 phases.
|
|
| 9. |
- Lu, Jun, 1962-, et al.
(författare)
-
Tin+1Cn MXenes with fully saturated and thermally stable Cl terminations
- 2019
-
Ingår i: Nanoscale Advances. - : Royal Society of Chemistry. - 2516-0230. ; 1:9, s. 3680-3685
-
Tidskriftsartikel (refereegranskat)abstract
- MXenes are a rapidly growing family of 2D materials that exhibit a highly versatile structure and composition, allowing for significant tuning of the materials properties. These properties are, however, ultimately limited by the surface terminations, which are typically a mixture of species, including F and O that are inherent to the MXene processing. Other and robust terminations are lacking. Here, we apply high-resolution scanning transmission electron microscopy (STEM), corresponding image simulations and first-principles calculations to investigate the surface terminations on MXenes synthesized from MAX phases through Lewis acidic melts. The results show that atomic Cl terminates the synthesized MXenes, with mere residual presence of other termination species. Furthermore, in situ STEM-electron energy loss spectroscopy (EELS) heating experiments show that the Cl terminations are stable up to 750 degrees C. Thus, we present an attractive new termination that widely expands the MXenes functionalization space and enables new applications.
|
|
| 10. |
- Palisaitis, Justinas, 1983-, et al.
(författare)
-
On the Structural Stability of MXene and the Role of Transition Metal Adatoms
- 2018
-
Ingår i: Nanoscale. - : Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 10:23, s. 10850-10855
-
Tidskriftsartikel (refereegranskat)abstract
- In the present communication, the atomic structure and coordination of surface adsorbed species on Nb2C MXene is investigated over time. In particular, the influence of the Nb adatoms on the structural stability and oxidation behavior of the MXene is addressed. This investigation is based on plan-view geometry observations of single Nb2C MXene sheets by a combination of atomic-resolution scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS) and STEM image simulations.
|
|
