| 1. |
- Persson, Ingemar, et al.
(författare)
-
Tailoring Structure, Composition, and Energy Storage Properties of MXenes from Selective Etching of In-Plane, Chemically Ordered MAX Phases
- 2018
-
Ingår i: Small. - : WILEY-V C H VERLAG GMBH. - 1613-6810 .- 1613-6829. ; 14:17
-
Tidskriftsartikel (refereegranskat)abstract
- The exploration of 2D solids is one of our times generators of materials discoveries. A recent addition to the 2D world is MXenes that possses a rich chemistry due to the large parent family of MAX phases. Recently, a new type of atomic laminated phases (coined i-MAX) is reported, in which two different transition metal atoms are ordered in the basal planes. Herein, these i-MAX phases are used in a new route for tailoriong the MXene structure and composition. By employing different etching protocols to the parent i-MAX phase (Mo2/3Y1/3)(2)AlC, the resulting MXene can be either: i) (Mo2/3Y1/3)(2)C with in-plane elemental order through selective removal of Al atoms or ii) Mo1.33C with ordered vacancies through selective removal of both Al and Y atoms. When (Mo2/3Y1/3)(2)C (ideal stoichiometry) is used as an electrode in a supercapacitor-with KOH electrolytea volumetric capacitance exceeding 1500 F cm(-3) is obtained, which is 40% higher than that of its Mo1.33C counterpart. With H2SO4, the trend is reversed, with the latter exhibiting the higher capacitance (approximate to 1200 F cm(-3)). This additional ability for structural tailoring will indubitably prove to be a powerful tool in property-tailoring of 2D materials, as exemplified here for supercapacitors.
|
|
| 2. |
- El Ghazaly, Ahmed, et al.
(författare)
-
Ultrafast, One-Step, Salt-Solution-Based Acoustic Synthesis of Ti3C2 MXene
- 2021
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 15:3, s. 4287-4293
-
Tidskriftsartikel (refereegranskat)abstract
- The current quest for two-dimensional transition metal carbides and nitrides (MXenes) has been to circumvent the slow, hazardous, and laborious multistep synthesis procedures associated with conventional chemical MAX phase exfoliation. Here, we demonstrate a one-step synthesis method with local Ti3AlC2 MAX to Ti3C2Tz MXene conversion on the order of milliseconds, facilitated by proton production through solution dissociation under megahertz frequency acoustic excitation. These protons combined with fluorine ions from LiF to selectively etch the MAX phase into MXene, whose delamination is aided by the acoustic forcing. These results have important implications for the future applicability of MXenes, which crucially depend on the development of more efficient synthesis procedures. For proof-of-concept, we show that flexible electrodes fabricated by this method exhibit comparable electrochemical performance to that previously reported.
|
|
| 3. |
- Meshkian, Rahele, et al.
(författare)
-
Theoretical Analysis, Synthesis, and Characterization of 2D W1.33C (MXene) with Ordered Vacancies
- 2019
-
Ingår i: ACS APPLIED NANO MATERIALS. - : AMER CHEMICAL SOC. - 2574-0970. ; 2:10, s. 6209-6219
-
Tidskriftsartikel (refereegranskat)abstract
- Synthesis of delaminated 2D W1.33C (MXene) has been performed by selectively etching Al as well as Sc/Y from the recently discovered nanolaminated i-MAX phases (W2/3Sc1/3)(2)AlC and (W2/3Y1/3)(2)AlC. Both quaternary phases produce MXenes with similar flake morphology and with a skeletal structure due to formation of ordered vacancies. The measured O, OH, and F terminations, however, differ in amount as well as in relative ratios, depending on parent material, evident from X-ray photoelectron spectroscopy. These findings are correlated to theoretical simulations based on first-principles, investigating the W1.33C, and the effect of termination configurations on structure, formation energy, stability, and electronic structure. The theoretical results indicate a favored F-rich surface composition, though with a system going from insulating/semiconducting to metallic for different termination configurations, suggesting a high tuning potential of these materials. Additionally, free-standing W1.33C films of 2-4 mu m thickness and with up to 10 wt % polymer (PEDOT:PSS) were tested as electrodes in supercapacitors, showing capacitances up to 600 F cm(-3) in 1 M H2SO4 and high capacitance retention for at least 10000 cycles at 10 A g(-1). This is highly promising results compared to other W-based materials to date.
|
|
| 4. |
- Zheng, Wei, et al.
(författare)
-
Flexible Free-Standing MoO3/Ti3C2Tz MXene Composite Films with High Gravimetric and Volumetric Capacities
- 2021
-
Ingår i: Advanced Science. - : Wiley. - 2198-3844. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- Enhancing both the energy storage and power capabilities of electrochemical capacitors remains a challenge. Herein, Ti3C2Tz MXene is mixed with MoO3 nanobelts in various mass ratios and the mixture is used to vacuum filter binder free, open, flexible, and free-standing films. The conductive Ti3C2Tz flakes bridge the nanobelts, facilitating electron transfer; the randomly oriented, and interconnected, MoO3 nanobelts, in turn, prevent the restacking of the Ti3C2Tz nanosheets. Benefitting from these advantages, a MoO3/Ti3C2Tz film with a 8:2 mass ratio exhibits high gravimetric/volumetric capacities with good cyclability, namely, 837 C g−1 and 1836 C cm−3 at 1 A g−1 for an ≈ 10 µm thick film; and 767 C g−1 and 1664 C cm−3 at 1 A g−1 for ≈ 50 µm thick film. To further increase the energy density, hybrid capacitors are fabricated with MoO3/Ti3C2Tz films as the negative electrodes and nitrogen-doped activated carbon as the positive electrodes. This device delivers maximum gravimetric/volumetric energy densities of 31.2 Wh kg−1 and 39.2 Wh L−1, respectively. The cycling stability of 94.2% retention ratio after 10 000 continuous charge/discharge cycles is also noteworthy. The high energy density achieved in this work can pave the way for practical applications of MXene-containing materials in energy storage devices.
|
|
