| 1. |
- Bouhafs, Chamseddine, et al.
(författare)
-
Structural properties and dielectric function of graphene grown by high-temperature sublimation on 4H-SiC(000-1)
- 2015
-
Ingår i: Journal of Applied Physics. - : American Institute of Physics (AIP). - 0021-8979 .- 1089-7550. ; 117:8, s. 085701-
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding and controlling growth of graphene on the carbon face (C-face) of SiC presents a significant challenge. In this work, we study the structural, vibrational, and dielectric function properties of graphene grown on the C-face of 4H-SiC by high-temperature sublimation in an argon atmosphere. The effect of growth temperature on the graphene number of layers and crystallite size is investigated and discussed in relation to graphene coverage and thickness homogeneity. An amorphous carbon layer at the interface between SiC and the graphene is identified, and its evolution with growth temperature is established. Atomic force microscopy, micro-Raman scattering spectroscopy, spectroscopic ellipsometry, and high-resolution cross-sectional transmission electron microscopy are combined to determine and correlate thickness, stacking order, dielectric function, and interface properties of graphene. The role of surface defects and growth temperature on the graphene growth mechanism and stacking is discussed, and a conclusion about the critical factors to achieve decoupled graphene layers is drawn. (C) 2015 AIP Publishing LLC.
|
|
| 2. |
- Dahlqvist, Martin, et al.
(författare)
-
Complex magnetism in nanolaminated Mn2GaC
- 2014
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We have used first-principles calculations and Heisenberg Monte Carlo simulations to search for the magnetic ground state of Mn2GaC, a recently synthesized magnetic nanolaminate. We have, independent on method, identified a range of low energy collinear as well as non-collinear magnetic configurations, indicating a highly frustrated magnetic material with several nearly degenerate magnetic states. An experimentally obtained magnetization of only 0.29 per Mn atom in Mn2GaC may be explained by canted spins in an antiferromagnetic configuration of ferromagnetically ordered sub-layers with alternating spin orientation, denoted AFM[0001]. Furthermore, low temperature X-ray diffraction show a new basal plane peak appearing upon a magnetic transition, which is consistent with the here predicted change in inter-layer spacing for the AFM[0001] configuration.
|
|
| 3. |
- Ekström, Erik, et al.
(författare)
-
The effects of microstructure, Nb content and secondary Ruddlesden-Popper phase on thermoelectric properties in perovskite CaMn1-xNbxO3 (x=0-0.10) thin films
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:13, s. 7918-7926
-
Tidskriftsartikel (refereegranskat)abstract
- CaMn1-xNbxO3 (x = 0, 0.5, 0.6, 0.7 and 0.10) thin films have been grown by a two-step sputtering/annealing method. First, rock-salt-structured (Ca,Mn1-x,Nb-x)O thin films were deposited on 11 & x304;00 sapphire using reactive RF magnetron co-sputtering from elemental targets of Ca, Mn and Nb. The CaMn1-xNbxO3 films were then obtained by thermally induced phase transformation from rock-salt-structured (Ca,Mn1-xNbx)O to orthorhombic during post-deposition annealing at 700 degrees C for 3 h in oxygen flow. The X-ray diffraction patterns of pure CaMnO3 showed mixed orientation, while Nb-containing films were epitaxially grown in [101] out of-plane-direction. Scanning transmission electron microscopy showed a Ruddlesden-Popper (R-P) secondary phase in the films, which results in reduction of the electrical and thermal conductivity of CaMn1-xNbxO3. The electrical resistivity and Seebeck coefficient of the pure CaMnO3 film were measured to 2.7 omega cm and -270 mu V K-1 at room temperature, respectively. The electrical resistivity and Seebeck coefficient were reduced by alloying with Nb and was measured to 0.09 omega cm and -145 mu V K-1 for x = 0.05. Yielding a power factor of 21.5 mu W K-2 m(-1) near room temperature, nearly eight times higher than for pure CaMnO3 (2.8 mu W K-2 m(-1)). The power factors for alloyed samples are low compared to other studies on phase-pure material. This is due to high electrical resistivity originating from the secondary R-P phase. The thermal conductivity of the CaMn1-xNbxO3 films is low for all samples and is the lowest for x = 0.07 and 0.10, determined to 1.6 W m(-1) K-1. The low thermal conductivity is attributed to grain boundary scattering and the secondary R-P phase.
|
|
| 4. |
- Halim, Joseph, et al.
(författare)
-
Electronic and optical characterization of 2D Ti2C and Nb2C (MXene) thin films
- 2019
-
Ingår i: Journal of Physics. - : IOP PUBLISHING LTD. - 0953-8984 .- 1361-648X. ; 31:16
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) transition metal carbides and/or nitrides (MXenes) are a new class of 2D materials, with extensive opportunities for property tailoring due to the numerous possibilities for varying chemistries and surface terminations. Here, Ti2AlC and Nb2AlC MAX phase epitaxial thin films were deposited on sapphire substrates by physical vapor deposition. The films were then etched in LiF/HCl solutions, yielding Li-intercalated, 2D Ti2CTz and Nb2CTz films, whose terminations, transport and optical properties were characterized. The former exhibits metallic conductivity, with weak localization below 50 K. In contrast, the Nb-based film exhibits an increase in resistivity with decreasing temperature from RT down to 40K consistent with variable range hopping transport. The optical properties of both films were determined from spectroscopic ellipsometry in the 0.75 to 3.50 eV range. The results for Ti2Clz films confirm the metallic behavior. In contrast, no evidence of metallic behavior is observed for the Nb2CT(z) film. The present work therefore demonstrates that one fruitful approach to alter the electronic and optical properties of MXenes is to change the nature of the transition metal.
|
|
| 5. |
- Halim, Joseph, et al.
(författare)
-
Sodium hydroxide and vacuum annealing modifications of the surface terminations of a Ti3C2 (MXene) epitaxial thin film
- 2018
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 8:64, s. 36785-36790
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate, and quantify, changes in structure and surface terminations of epitaxial thin films of titanium carbide (Ti3C2) MXene, when treated by sodium hydroxide solution followed by vacuum annealing at 550 degrees C. Using X-ray photoelectron spectroscopy and scanning transmission electron microscopy, we show that NaOH treatment produce an increase in the c-lattice parameter together with an increase in the O terminations and a decrease in the F terminations. There is also an increase in the percentage of the binding energy of Ti-species in Ti 2p XPS region, which suggests an increase in the overall oxidation state of Ti. After subsequent annealing, the c-lattice parameter is slightly reduced, the overall oxidation state of Ti is decreased, and the F surface terminations are further diminished, leaving a surface with predominantly O as the surface terminating species. It is important to note that NaOH treatment facilitates removal of F at lower annealing temperatures than previously reported, which in turn is important for the range of attainable properties.
|
|
| 6. |
- Muratov, Dmitry S., et al.
(författare)
-
Slot-Die-Printed Two-Dimensional ZrS3 Charge Transport Layer for Perovskite Light-Emitting Diodes
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:51, s. 48021-48028
-
Tidskriftsartikel (refereegranskat)abstract
- Liquid-phase exfoliation of zirconium trisulfide (ZrS3) was used to produce stable and ready-to-use inks for solution-processed semiconductor thin-film deposition. Ribbon-like layered crystals of ZrS3 were produced by the chemical vapor transport method and were then exfoliated in three different solvents: dimethylformamide, ethanol, and isopropyl alcohol. The resulting ZrS3 dispersions were compared for stability and the ability to form continuous films on top of the perovskite layer in light-emitting diodes with the ITO/PEDOT:PSS/MAPbBr(3)/2D-ZrS3/LiF/Al structure. Film deposition was performed by using either spray or slot-die coating methods. The slot-die coating route proved to produce better and more uniform films with respect to spray coating. We found that the 2D ZrS3 electron injection layer (EIL) stabilized the interface between the perovskite and LiF/Al cathode, reducing the turn-on voltage to 2.8 V and showing a luminance that does not degrade during voltage sweep. On the other hand, ELL-free devices show electroluminescence on the first voltage sweep that reduces almost to zero in the subsequent sweeps. Combining physical device simulation and density functional theory calculation, we are able to explain these results in terms of lowering the electron injection barrier at the cathode.
|
|
| 7. |
- Singh, Niraj Kumar, et al.
(författare)
-
Electron-phonon coupling and quantum correction to topological magnetoconductivity in Bi2GeTe4
- 2022
-
Ingår i: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 105:4
-
Tidskriftsartikel (refereegranskat)abstract
- We report structure, vibrational properties, and weak antilocalization-induced quantum correction to magnetoconductivity in single-crystal Bi2GeTe4. Surface band-structure calculations show a single Dirac cone corresponding to topological surface states in Bi2GeTe4. An estimated phase coherence length, lΦ ~ to 143 nm and prefactor α~-1.54 from Hikami-Larkin-Nagaoka fitting of magnetoconductivity describe the quantum correction to conductivity. An anomalous temperature dependence of A1g Raman modes confirms enhanced electron-phonon interactions. Our results establish that electrons of the topological state can interact with the phonons involving the vibrations of Bi-Te in Bi2GeTe4.
|
|
| 8. |
- Xie, Mengyao, et al.
(författare)
-
Structural, free-charge carrier and phonon properties of zinc-blende and wurtizte polymorphs in InN epitaxial layers
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We present a comprehensive study of the structural, phonon and free electron properties of zincblende InN films containing inclusion of wurtzite InN. Appropriate methods based on X-ray diffraction and Infrared spectroscopic ellipsometry to identify wurtizte and zinc-blende InN and quantify their phase ratio are developed and discussed. Thorough analysis on the formation of the cubic and wurtzite phases is presented and their evolution with film thickness is discussed in detail. The freecharge carrier and phonon properties of the two phases are discussed together with the determination of electron accumulation at the zinc-blende InN (001) and wurtzite (10̅11) surfaces.
|
|
| 9. |
- Zhang, Xiaofu, et al.
(författare)
-
Suppression of the transition to superconductivity in crystal/glass high-entropy alloy nanocomposites
- 2022
-
Ingår i: Communications Physics. - : NATURE PORTFOLIO. - 2399-3650. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- High entropy alloys are multielement materials exhibiting enhanced properties compared to their binary or ternary equivalents. Here, the authors investigate the influence of microstructure and elemental distribution on the transport and superconducting properties of (TaNb)(1-x)(ZrHfTi)(x) thin films. Superconducting high entropy alloys (HEAs) may combine extraordinary mechanical properties with robust superconductivity. They are suitable model systems for the investigation of the interplay of disorder and superconductivity. Here, we report on the superconductivity in (TaNb)(1-x)(ZrHfTi)(x) thin films. Beyond the near-equimolar region, the films comprise hundreds-of-nanometer-sized crystalline grains and show robust bulk superconductivity. However, the superconducting transitions in these nanocomposites are dramatically suppressed in the near-equimolar configurations, i.e., 0.45 < x < 0.64, where elemental distributions are equivalently homogeneous. Crystal/glass high entropy alloy nanocomposite phase separation was observed for the films in the near-equimolar region, which yields a broadened two-step normal to superconducting transition. Furthermore, the diamagnetic shielding in these films is only observed far below the onset temperature of superconductivity. As these unusual superconducting transitions are observed only in the samples with the high mixing entropy, this compositional range influences the collective electronic properties in these materials.
|
|
| 10. |
- Alnoor, Hatim, et al.
(författare)
-
Exploring MXenes and their MAX phase precursors by electron microscopy
- 2021
-
Ingår i: Materials Today Advances. - : Elsevier. - 2590-0498. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- This review celebrates the width and depth of electron microscopy methods and how these have enabled massive research efforts on MXenes. MXenes constitute a powerful recent addition to 2-dimensional materials, derived from their parent family of nanolaminated materials known as MAX phases. Owing to their rich chemistry, MXenes exhibit properties that have revolutionized ranges of applications, including energy storage, electromagnetic interference shielding, water filtering, sensors, and catalysis. Few other methods have been more essential in MXene research and development of corresponding applications, compared with electron microscopy, which enables structural and chemical identification at the atomic scale. In the following, the electron microscopy methods that have been applied to MXene and MAX phase precursor research are presented together with research examples and are discussed with respect to advantages and challenges.
|
|
